INCLUDES:
• (1) Pressure Module, -15 To 100 (-1 - 7 Bar), (-100 - 700 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: -15 to 100 psi, -1 - 7 bar
• Burst rating: 4x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.0175%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, -15 To 200 (-1 - 14 Bar), (-100 - 1400 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: -15 to 200 psi, -1 - 14 bar
• Burst rating: 4x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.0175%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 15 (0 - 1 Bar) (0 - 100 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 15 psi, 0 - 1 bar
• Burst rating: 3x
• Hi side media: Dry aIR
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 100 (0 - 7 Bar), (0 - 700 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 100 psi, 0 - 7 bar
• Burst rating: 3x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 500 (0 - 35 Bar), (0 - 3500 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 500 psi, 0 - 35 bar
• Burst rating: 3x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 1000 (0 - 70 Bar), (0 - 7000 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• 1- O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 1000 psi, 0 - 70 bar
• Burst rating: 3x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 300 (0 - 20 Bar), (0 - 2000 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 300 psi, 0 - 20 bar
• Burst rating: 3x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 3000 (0 - 200 Bar), (0 - 20 Mpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 3000 psi, 0 - 200 bar
• Burst rating: 3x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 5000 (0 - 340 Bar), (0 - 34 Mpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 5000 psi, 0 - 340 bar
• Burst rating: 3x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 10000 (0 - 700 Bar), (0 - 700 Mpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 10000 psi, 0 - 700 bar
• Burst rating: 2x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, -12 To 100 (-0.8 To 7 Bar), (-80 - 700 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: -12 to 300 psi, -0.8 to 20 bar
• Burst rating: 4x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, -15 To 30 (-1 - 2 Bar), (-100 - 200 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: -15 to 30 psi, -1 - 2 bar
• Burst rating: 4x
• Hi side media: Dry air
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, -12 To 100 (-0.8 To 7 Bar), (-80 - 700 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: -12 to 100 psi, -1 - 7 bar
• Burst rating: 4x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.01% of FS
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Fluke 753 Documenting Process Calibrator
• (3) sets of stackable test leads
• (3) sets of TP220 test probes with three sets of "extended tooth" alligator clips
• (2) sets AC280 hook clips
• (1) BP7240 Li-ion battery pack
• (1) BC7240 battery charger
• (1) C799 field soft case
• (1) USB communication cable
• (1) Getting started guide
• (1) Instruction manual on CDROM
• (1) PC/TRACK 2 sample software that enables upload and printing of calibration records
FEATURES:
• Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
• Power transmitters during test using loop supply with simultaneous mA measurement
• Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
• Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
• Holds up to a full week of downloaded procedures and calibration results.
• Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
• Easy to use
• Three year warranty
• Bright white dual display. Read both sourced and measured parameters simultaneously.
• Multi lingual interface
• Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
• Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
• Delivered with DPC/Track Sample software.
• Compatible with many Asset Management software packages.
SPECIFICATIONS:
• Battery Type: Li-ion
• Product Height: 7.87 IN
• Product Length: 16.14 IN
• Product Width: 11.02 IN
For documentation, the 753 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.
FLUKE 754 Data Sheet
INCLUDES:
• (1) Documenting Process Calibrator
• (3) Stackable Industrial Test Leads (75X)
• (3) Test Probes (TP220-1)
• (3) Alligator Clip Sets (Extended Tooth)
• (2) Hook Clip Sets (AC280)
• (1) Jumper for Three-wire RTD Measurement Connections
• (1) Battery Charger (BC7240)
• (1) Li-Ion Battery Pack (BP7240)
• (1) DPC/Track 2 Sample Software
• (1) NIST Certificate of Calibration
• (1) Adjustable Quick-Release Strap
• (1) Soft Carrying Case (C799)
• (1) 6 ft. USB Communication Cable
• (1) HART Communications Cable
• (1) User Manual
FEATURES:
• Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
• Power transmitters during test using loop supply with simultaneous mA measurement
SPECIFICATIONS:
• Unit Weight (KG): 4.15
• Unit Height (CM): 18.5
• Unit Length (CM): 34
• Unit Width (CM): 42.6
Fluke 754 Documenting Process Calibrator with HART communication does the work of many tools. Whether you're calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does so many different tasks, so quickly and so well, it's the only process calibrator you need to carry. This rugged, reliable integrated communicating calibrator is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.
INCLUDES:
• (1) Industrial Multimeter, 1000V Cat III
• (1) Test Lead Set
• (1) 9V Battery
• (1) Integrated Holster
FEATURES:
• Large display
• Backlight for work in dim areas
• Ergonomic overmolded housing with integrated probe holders
• Auto and manual ranging
• Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards
SPECIFICATIONS:
• Unit Weight (KG): 0.78
• Unit Height (CM): 8.6
• Unit Length (CM): 29.3
• Unit Width (CM): 15.8
• Maximum voltage between any terminal and earth ground: 1000 V
• Temperature coefficient: 0.1 x (specified accuracy / °C (< 18°C or > 28°C)
• Maximum temperature: 150 ºC (302 ºF)
• Battery life: 400 hours typical (alkaline)
• Size: (H x W x L) 4.3 x 9 x 18.5 cm
•
•
The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke's original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.
INCLUDES:
• (1) Milliamp Process Clamp Meter
• (2) AA Batteries
• (1) Soft Carrying Case
• (1) User Manual
FEATURES:
• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without ”breaking the loop”
SPECIFICATIONS:
• Unit Weight (KG): 0.53
• Unit Height (CM): 7.2
• Unit Length (CM): 27.7
• Unit Width (CM): 11
Milliamp process clamp meters can measure mA signals without breaking the loop. The popular Fluke 771 mA Clamp Meter saves time by making fast, accurate measurements on 4-20 mA signal loops without breaking the circuit.
INCLUDES:
• (1) Milliamp Process Clamp Meter
• (4) AA Batteries
• (1) Soft Carrying Case
FEATURES:
• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without ”breaking the loop”
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 - 50 mA signals in older control systems using the 99.9 mA range
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend Battery life
• Hold function captures and displays changing measurements
SPECIFICATIONS:
• Unit Weight (KG): 1.1
• Unit Height (CM): 7.3
• Unit Length (CM): 31.7
• Unit Width (CM): 14.9
Fluke 772 Milliamp Clamp Meter measures, sources, and simulates 4-20 mA signals for testing control system I/O or IPs. The Fluke 772 adds to the basic capabilities of the Fluke 771 to save more time and expand its applications. With the 771, you'll also be able to: source and simulate 4-20 mA signals for testing control system I/O; measure 4-20 mA signals with in-circuit measurement; power a transmitter with the 24 V loop power supply; and automatically ramp and step change the 4-20 mA output for remote testing.
INCLUDES:
• (1) Milliamp Process Clamp Meter
• (1) Test Lead Set (TL75)
• (1) Test Clip Set (AC72)
• (4) AA Batteries
• (1) Soft Carrying Case
• (1) User Manual
FEATURES:
• The Fluke 773 mA Clamp Meter expands upon the capabilities of the 771 and 772 mA Clamp Meters but with the following additional features:
• DC voltage measurement to verify 24 V power supplies or voltage I/O signals
• Source DC voltage to test input devices that accept a 1-5 V or 0 - 10 V signals
• Enables milliamp signal logging to a separate logging device without breaking the loop
• Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
• mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
• Apply a mA input signal to a device and measure its 4-20 mA output on devices such as valves or mA isolators
• Voltage output linear ramp or 25% step output
SPECIFICATIONS:
• Unit Weight (KG): 0.98
• Unit Height (CM): 7.5
• Unit Length (CM): 31.8
• Unit Width (CM): 14.9
Fluke 773 Milliamp Process Clamp Meter saves time and money by measuring output signals without shutting down the system. The Fluke 773 milliamp clamp meter is accurate and versatile. It saves time and money by measuring 4–20 mA signals five times faster than with traditional DMMs, and without breaking the loop. That means you can troubleshoot a live device without having to power down and possibly miss something going on in the process.
INCLUDES:
• (1) TL71 Premium test lead set
• (1) AC72 Alligator clips
• (4) AA alkaline batteries
• (1) Quick reference guide
FEATURES:
• 20 mA dc current source/measure/simulate
• Simultaneous mA and % of scale readout
• DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards
• Fluke Connect® compatibility for wireless data logging (with IR3000FC module*)
• Precision 1000 V, 440 mA true-rms digital multimeter
• Frequency measurement to 20 kHz
• Min/Max/Average/Hold/Relative modes
• Diode test and continuity beeper
• Manual step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes
SPECIFICATIONS:
• Maximum voltage applied between any jack and earth ground: 1000 V RMS
• Storage temperature: -40 °C to 60 °C
• Operating temperature : -20 °C to 55 °C
• Temperature coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18 °C or > 28 °C)
• Relative humidity: 95% up to 30 °C; 75% up to 40 °C; 45% up to 50 °C; 35% up to 55 °C
• Vibration: Random, 2 g, 5-500 Hz
• Shock: 1 meter drop test
• Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V
• Dimensions H x W x L: 1.97" x 3.94" x 8.00"
• Battery: Four AA alkaline batteries
• Battery life: 140 hours typical (measurement), 10 hours typical (sourcing 12 mA)
• Warranty: Three years
The Fluke 787B ProcessMeter™ doubles troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87 DMM, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. With Fluke Connect® mobile app and desktop software compatibility technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere*.
INCLUDES:
• (1) Process meter
FEATURES:
• Enhanced backlight with 2 brightness settings
• 1200 ohm drive capability on mA source
• 24 V loop power supply
SPECIFICATIONS:
• Unit Weight (KG): 1.16
• Unit Height (CM): 7.6
• Unit Length (CM): 22.9
• Unit Width (CM): 15.2
The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the new Fluke 789 – the ultimate loop calibration multimeter.
INCLUDES:
• (1) Fluke Connect Processmeter/Temp Measure Kit
• (1) ProcessMeter with HART Communications/Diagnostics (789)
• (1) Wireless K-Type Temperature Module (T3000 FC)
• (1) Wireless Fluke Connect Module (IR3000 FC)
• (1) Premium Test Lead Set (TL71)
• (1) Alligator Clip Set (AC72)
• (4) AA Alkaline Batteries (installed)
• (1) User Manual
FEATURES:
• Unique new wireless measurement logging capability
• Temperature measurement from -200 °C to 1372 °C using the t3000 FC
• 24 V loop power supply
• 100 % larger dual display
• 1200 ohm drive capability on mA source
• Enhanced backlight with two brightness settings
• 0 % to 100 % mA Span Check buttons to toggle between 4 and 20 mA
• Infrared I/O serial port compatible with FlukeView Forms Software Version 2.1
• Externally accessible fuses for easy replacement
• DMM designed to meet 1000 Volt IEC 1010 CAT III standards
SPECIFICATIONS:
• Unit Weight (KG): 1.9435
• Unit Height (CM): 23
• Unit Length (CM): 15.2
• Unit Width (CM): 22
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect® with ShareLive™ video call, process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.
