INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +16 psi, -0.97 bar to 1.1 bar
• High pressure range: 0 psi to +1500 psi, 0.00 bar to 103.4 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.1 psi, 0.001 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.025% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +16 psi, -0.97 bar to 1.1 bar
• High pressure range: 0 psi to +3000 psi, 0.00 bar to 200 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.1 psi, 0.01 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.025% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +16 psi, -0.97 bar to 1.1 bar
• High pressure range: 0 psi to +5000 psi, 0.00 bar to 345 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.1 psi, 0.01 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.035% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +36 psi, -0.97 bar to 2.48 bar
• High pressure range: -12 to +100 psi, -0.83 bar to 6.9 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: .01 psi, 0.0001 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.025% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +36 psi, -0.97 bar to 2.48 bar
• High pressure range: -12 psi to +300 psi, -0.83 bar to 20 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.01 psi, 0.001 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.025% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +36 psi, -0.97 bar to 2.48 bar
• High pressure range: -12 psi to +500 psi, -0.83 bar to 34.5 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.01 psi, 0.001 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.025% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +36 psi, -0.97 bar to 2.48 bar
• High pressure range: 0 psi to +1000 psi, 0.00 bar to 69 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.1 psi, 0.001 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.025% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +36 psi, -0.97 bar to 2.48 bar
• High pressure range: 0 psi to +1500 psi, 0.00 bar to 103.4 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.1 psi, 0.01 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.025% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +36 psi, -0.97 bar to 2.48 bar
• High pressure range: 0 psi to +3000 psi, 0.00 bar to 200 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.1 psi, 0.01 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.025% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Soft case
• (4) AA batteries
• (1) Manual
• (1) Traceable calibration certificate
• (1) Test leads
FEATURES:
• Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Switch test on both pressure inputs
• Pressure displayed in the user’s choice of 19 engineering units
• Large backlit graphic display can display up to three inputs simultaneously
• Store five instrument setups for recall and use
SPECIFICATIONS:
• Instrument setup recall: Last used on power-up
• Environmental: Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.
• Altitude: 2,000 m
• Ingress protection: IP-40
• Power requirements: 6.0 V DC
• Battery life: >35 hours, typical usage
• Batteries required: 4 Standard AA cells
• Dimensions (H x W x D): 7.9" x 4.3" x 2.3"
• Connectors/ports pressure: Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe
• Low pressure range: -14 psi to +36 psi, -0.97 bar to 2.48 bar
• High pressure range: 0 psi to +5000 psi, 0.00 bar to 345 bar
• Low resolution: 0.001 psi, 0.0001 bar
• High resolution: 0.1 psi, 0.01 bar
• Low Accuracy: 0.025% of full scale
• High Accuracy: 0.035% of full scale
Pressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).
INCLUDES:
• (1) Temperature Calibrator
FEATURES:
• Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant
• The Fluke 724 is the master’s answer to temperature calibration and can measure and source 10 thermocouple types and 7 RTD types, plus volts and ohms
• The Fluke 724 even handles high-speed pulsed RTD cIRcuits and provides loop power
• With its simple no-menus controls, the Fluke 724 is easy to operate too
SPECIFICATIONS:
• Unit Weight (KG): 1.13
• Unit Height (CM): 8.5
• Unit Length (CM): 25.5
• Unit Width (CM): 19.8
Built for the masters of temperature. The Fluke 724: everything you need to troubleshoot and calibrate temperature.
INCLUDES:
• (1) Multifunction Process Calibrator
FEATURES:
• Small, streamlined shape makes it easy to carry
• Rugged, reliable design stands up to field use
• Easy to read measure/source screen lets you view input and output simultaneously
SPECIFICATIONS:
• Unit Weight (KG): 1.19
• Unit Height (CM): 7
• Unit Length (CM): 25
• Unit Width (CM): 16
The Fluke 725 Multifunction Process Calibrator is simply powerful! With the Fluke 725 Multifunction Process Calibrator you can easily source and measure almost any process parameter and test almost any process device. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. From the moment you pick it up, the Fluke 725 is ready to perform as a powerful, yet easy-to-use field calibrator. Its simple controls, without menus, make operation easy.
Fluke 725EX Intrinsically Safe M/F Process Calibrator
Regular price
$4,299.99
/
INCLUDES:
• (1) I.S. Multifunction Process Calibrator
FEATURES:
• Use the measure and source functions to test and calibrate almost any process parameter.
• ATEX II 1 G Ex ia IIB 171°C KEMA 04ATEX 1303X
• I.S. Class I, Division 1 Groups B-D, 171°C compliance
• Two channel simultaneous source and measure capability for calibration of transmitters
• Store frequently-used test setups for later use
• Pressure measurement to 3,000 psi/200 bar using any of the 8 intrinsically safe Fluke 700PEx Pressure Modules, calibrate pressure transmitters and I/P devices
• Pressure switch test function to capture set, reset and deadband values
• Compact size and weight
• Simple, push-button user interface
• Rugged and reliable, for field use
SPECIFICATIONS:
• Unit Weight (KG): 1.22
• Unit Height (CM): 7
• Unit Length (CM): 25
• Unit Width (CM): 16
The 725EX Intrinsically Safe Multifunction Process Calibrator is powerful yet easy-to-use. Combined with one of the (8) Fluke-700PEx pressure modules, the 725Ex is able to calibrate almost any process instrument likely to need service in an area where explosive gasses may be present.
INCLUDES:
• (1) Precision Multifunction Calibrator
FEATURES:
• More precise measurement and calibration source performance, accuracies of 0.01%
• Two separate channels; measure, source and view process signals simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
SPECIFICATIONS:
• Unit Weight (KG): 1.26
• Unit Height (CM): 8.5
• Unit Length (CM): 25.7
• Unit Width (CM): 19.8
The Fluke 726 is a precise and powerful, yet easy-to-use field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves and test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.
Fluke 750422 80PK-1 Thermocouple Bead Probe, Type K, -40 to 260 Deg C
Regular price
$38.61
/
INCLUDES:
• (1) Probe, Thermocouple, Beaded K-Type
FEATURES:
• Maximum Voltage: 24 V ac rms or 60 V dc maximum for proper safe operation
• Type-K thermocouple for general purpose applications
SPECIFICATIONS:
• Unit Weight (KG): 0.02
• Unit Height (CM):4
• Unit Length (CM): 22.7
• Unit Width (CM): 10
• Output: @ 25 °C (77 °F) = 1.00 mV (reference junction @ 0 °C)
• Seebeck coefficient: 25 °C (77 °F) = 40.50 μV / °C
• Measurement time (time constant): 2 seconds (for aIR at room temperature and one atmosphere of pressure moving with a velocity of 65 ft / sec)
• Maximum temperature of bead: 260°C (500°F)
• Measurement range: -50 - 150°C (-58 to +302 °F)
The 80PK-1 is a Type K Bead Thermocouple designed for general purpose temperature measuring applications. It has an extremely fast response time, due to the low thermal mass of the exposed tip. The 40-inch (1-meter) Teflon cable is terminated with a Type K miniature thermocouple connector with 0.312-inch (0.792-mm) pin spacing. The 80PK-can be used with any temperature measuring instrument that is designed to accept Type K thermocouples and that has a miniature connector input. The 80PK-1 must be used in Teflon-compatible environments and is not suitable for liquid immersion. Above 260°C (500°F), Teflon will emit toxic fumes.
INCLUDES:
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
• Digital communication to calibrators: No analog losses or errors
SPECIFICATIONS:
• Parameter/Range: 0 - 1 inH2O, 0 - 2.5 mBa
• Burst rating: 30x
• Hi side media: Dry aIR
• Reference uncertainty: +/-0.15%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
• Digital communication to calibrators: No analog losses or errors
SPECIFICATIONS:
• Parameter/Range: 0 - 10 inH2O, 0 - 25 mBar
• Burst rating: 3x
• Hi side media: Dry aIR
• Reference uncertainty: +/-0.1%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, -12 To 100 (-0.8 To 7 Bar), (-80 - 700 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• - 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 1 psi, 0 - 70 mBar
• Burst rating: 3x
• Hi side media: Dry aIR
• Reference uncertainty: +/-0.050%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, -12 To 100 (-0.8 To 7 Bar), (-80 - 700 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 5 psi, 0 - 350 mBar
• Burst rating: 3x
• Hi side media: Dry aIR
• Reference uncertainty: +/-0.04%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 15 (0 - 1 Bar), (0 - 100 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 15 psi, 0 - 1 bar
• Burst rating: 3x
• Hi side media: Dry aIR
• Reference uncertainty: +/-0.0175%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 30 (0 - 2 Bar), (0 - 200 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 30 psi, 0 - 2 bar
• Burst rating: 4x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.0175%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 100 (0 - 7 Bar), (0 - 700 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 100 psi, 0 - 7 bar
• Burst rating: 4x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.0175%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 500 (0 - 35 Bar), (0 - 3500 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 500 psi, 0 - 35 bar
• Burst rating: 4x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.0175%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
INCLUDES:
• (1) Pressure Module, 0 - 1000 (0 - 70 Bar), (0 - 7000 Kpa)
• (1) 1/8 in. NPT Male-to-1/4 in. NPT Male Adapter
• (1) 1/8 in. NPT Male-to-1/4 BSP Male Adapter
• (1) 1/8 in. NPT Male-to-M20 Male Adapter
• (1) O-RING (-111) Cast Urethane
• (1) Certificate of Calibration
• (1) User Manual
FEATURES:
• 0.025 % reference uncertainty
• 6-month and 1-year specifications
• Temperature compensated 0 °C to 50 °C
• Broad selection of ranges
• Gage, differential, dual range, absolute and vacuum measurement models
SPECIFICATIONS:
• Parameter/Range: 0 - 1000 psi, 0 - 70 bar
• Burst rating: 3x
• Hi side media: Stainless steel 316-SS
• Reference uncertainty: +/-0.0175%
• Temperature-compensated: 0° to 50°C
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.
