Products

INCLUDES: • (1) Fluke Connect Vibration Meter • (1) USB Cable • (1) Storage Case • (1) Belt Holster • (1) MS Excel Templates • (4) AA Batteries FEATURES: • Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure • Consistent data quality at both low and high frequency ranges • Four-level scale indicates severity of problems for overall vibration and bearing condition • Trending in Microsoft® Excel using built-in templates • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines • Crest Factor+ technology provides reliable bearing assessment using dIRect sensor tip measurements between 4,000 Hz and 20,000 Hz • Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud • Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ ShareLive™ video call • Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements • Temperature measurement with Spot IR Sensor increases diagnostic capabilities SPECIFICATIONS: • Unit Weight (KG): 1.475 • Unit Height (CM): 10.2 • Unit Length (CM): 26.5 • Unit Width (CM): 19.4 • Battery type: AA (2) Lithium IRon Disulfide • Battery life: 250 measurements • Size (L x W x H): 24.1 cm x 7.1 cm x 5.8 cm • Weight: 0.40 kg (0.89 lb) • Connectors: USB mini-B 7-pin, external sensor jack (SMB connector) • Operating temperature: -20 °C to 50 °C (-4 °F to 122 °F) • Storage temperature: -30 °C to 80 °C (-22 °F to 176 °F) • Sensitivity: 100 mV g ± 10% The reliable, repeatable, accurate way to check bearings and overall vibration. Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

INCLUDES: • (1) External Vibration Sensor for 805 Vibration Meter FEATURES: • Low-profile 90-degree sensor body allows the sensor to get into tight spots • Rugged, coiled cable minimizes dangling, while stretching to more than 7ft when needed • Powerful "U" shaped magnet mount creates a firm connection to flat, or curved measurement surfaces • Rugged, sealed cable connector with strain relief tail reduces cable wear • Removable sensor magnet to allow for direct attachment to a sensor mounting pad, or threaded hole on a piece of equipment • Connects directly to 805 Vibration Meter SMB connector located in the heel of the meter SPECIFICATIONS: • Measurement range: 7 g pk (68.7 m/s² pk) • Frequency range: 0 to 6000 cpm (0 to 100 Hz) • Relay: 3A Form C 480 VAC • Relay (Contacts) (DPDT): Normally open / closed • Temperature range (Operating): -13 to 140°F (-25 to 60°C) • Enclosure rating: IP66 • Dimensions W x H x D: 4.35" x 3.30" x 4.35" • Sensing element: Magnet • Housing material: Aluminum alloy • Electrical connector: Screw terminals • Screw terminal wire size: 24-14 AWG (0.2 - 2.5 mm²) • Cable input: 3/4-14 NPT • Mounting hole size: 0.25" (6.4 mm) • Sensing geometry: Inertial element The Fluke 805ES is an external vibration sensor that is ideal in situations for which it is either difficult or impractical to use the onboard vibration sensor tip of the 805 Vibration Meter. The 805ES allows you to take measurements in crowded or hard-to-reach locations, behind machine guards or enclosures, or in out-of-reach places where it is difficult to apply sufficient manual pressure to the 805 Vibration Meter.

INCLUDES: • (1) Type K, Integrated Dmm Probe FEATURES: • Type-K thermocouple with standard shrouded banana jack • Convenient one piece construction • Compatible with DMMs with temperature measurement functions SPECIFICATIONS: • Unit Weight (KG): 0.042 • Unit Height (CM): 2.1 • Unit Length (CM): 22.6 • Unit Width (CM): 9.8 80BK-A Integrated DMM Temperature Probe.

INCLUDES: • (1) Mini Thermocouple Connect,Type J,Male • (2) Thermocouple Mini-Connectors, Type J FEATURES: • Isothermal screw terminal for J wire • Suitable for up to 20 gauge thermocouple wire • Color coded to industry standards (J-black) SPECIFICATIONS: • Unit Weight (KG): 0.02 • Unit Height (CM):1.5 • Unit Length (CM): 15.3 • Unit Width (CM): 10.2 Type J, Male Mini-Connectors.

INCLUDES: • (1) Mini Thermocouple Connect,Type K,Male • (2) Thermocouple Mini-Connectors, Type K FEATURES: • Isothermal screw terminal for K wire • Suitable for up to 20 gauge thermocouple wire • Color coded to industry standards (K-yellow) SPECIFICATIONS: • Unit Weight (KG): 0.02 • Unit Height (CM):1.9 • Unit Length (CM): 15 • Unit Width (CM): 10 Type K, male mini-connectors.

INCLUDES: • (1) AC/DC Current Probe, Scopemeter FEATURES: • Compatible with any Fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter • Compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter • Designed to provide you with safe, high accuracy measurements for a wide range of applications • Specially designed built-in safety features such as the 600 V RMS rating at the input jaws, output cable and BNC connector enhance work safety in industrial and commercial power distribution systems • The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems SPECIFICATIONS: • Unit Weight (KG): 0.46 • Unit Height (CM):6.6 • Unit Length (CM): 24.6 • Unit Width (CM): 16.1 • Basic accuracy (DC to 1 kHz): 100 mV/A setting: 50 mA to 10 A +/- 3% of reading + 50 mA; 10 mV/A setting: 50 mA to 40 A +/- 4% of reading + 50 mA; 40 A to 80 A +/- 12% of reading + 50 mA; 80 - 100 A +/- 15% of reading • Output Signal: 10 A range: 100 mV/A | 100 A range: 10 mV/A • Working voltage: 600 V AC rms • Maximum conductor size: 11.8 mm (.46 in.) diameter • Safety rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600 V • AC current range: 0.1A to 70A AC switchable • DC current range: 0.1A to 100A DC switchable The Fluke 80I-110s is a clamp-on AC/DC Current Probe that reproduces current waveforms found in commercial and industrial power distribution systems. The Probe performance is optimized for accurate reproduction of currents at line frequency and up to the 50th harmonic waveform. The 80i-110s is also compatible with any instrument capable of millivolt measurements.

INCLUDES: • (1) Probe, Electronic AIR Cleaner FEATURES: • Voltage range: 0 - 15kV DC or peak AC, 10kV rms AC • Basic Accuracy: DC +/- 2% 60 Hz: +/- 5% • Division ratio: 1000:1 SPECIFICATIONS: • Unit Weight (KG): 0.364 • Unit Height (CM): 10.2 • Unit Length (CM): 25.4 • Unit Width (CM): 16.5 • RequIRed meter input resistance: 10 megohm The 80K-15 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photocopy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.

INCLUDES: • (1) High Voltage Probe FEATURES: • The 80K-40 is a high voltage probe that can only be used to make measurements on energy limited cIRcuits within equipment. • Examples include high voltages within televisions or photo copy machines. • DO NOT use this probe to measure high voltage on power distribution systems. • The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance. • Designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. SPECIFICATIONS: • Unit Weight (KG): 0.36 • Unit Height (CM): 7 • Unit Length (CM): 47 • Unit Width (CM): 16.5 • Voltage range: 1 kV to 40 kV dc or peak ac, 28 kV rms ac • Input resistance: 1000 MΩ • Accuracy DC: 20 kV to 35 kV: ±1% at 20°C to 30°C; add 1% at 10°C <20°C and >30°C to 45°C. • Accuracy AC: 60 Hz, ±5% The 80K-40 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited cIRcuits within.

INCLUDES: • (1) High Voltage Probe FEATURES: • A high voltage probe that allows a multimeter to measure up to 6,000V. Intended for low energy applications only • A special plastic body houses the divider and provides the user with isolation and protection from the voltage being measured. SPECIFICATIONS: • Unit Weight (KG): 0.24 • Unit Height (CM): 6.5 • Unit Length (CM): 36.5 • Unit Width (CM): 14.5 • Voltage range: 0 - 6 kV, dc or peak ac • Accuracy---DC to 500 Hz: ±1%; 500 Hz to 1 kHz: ±2%; Above 1 kHz: Output reading falls. Typically, -30% at 10 kHz. • Storage temperature: -20 - 60°C; Operating temperature: 0 - 50°C • Temperature Coefficient: 100 ppm/C • Relative humidity: 20 - 80% • Altitude: 2000 m • Shock and Vibration---Shock: 1 m drop; Vibration: 5-55 Hz swept sine 3 g maximum. The 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within.

INCLUDES: • (1) Type J Bead Probe Thermocouple Assembly FEATURES: • Type-J thermocouple for general purpose applications SPECIFICATIONS: • Unit Weight (KG): 0.046 • Unit Height (CM): 2.6 • Unit Length (CM): 22.9 • Unit Width (CM): 10.2 • Measurement range: -40 - 260°C Fluke 80PJ-1 Type J Bead Probe. This basic, inexpensive thermocouple offers good accuracy and fast response. (Not suitable for liquid immersion).

INCLUDES: • (1) Type J Lance Tip Probe Thermocouple Assembly FEATURES: • J- Type probe for use on surfaces and for insertion into aIR and non-caustic gases • Probe constructed with 304 stainless steel is compatible with J-type thermometers SPECIFICATIONS: • Unit Weight (KG): 0.07 • Unit Height (CM): 4.1 • Unit Length (CM): 30.4 • Unit Width (CM): 15.2 • Measurement range: -40°C to 260 °C 80PJ-9 Type J Lance Tip Probe Thermocouple Assembly.

INCLUDES: • (1) Type J Extension Kit • (1) pair of male/female mini-connectors FEATURES: • Extending and repairing J-type thermocouple wires SPECIFICATIONS: • Unit Weight (KG): 0.063 • Unit Height (CM): 3 • Unit Length (CM): 26.7 • Unit Width (CM): 13 • Maximum continuous exposure temperature: 260ºC 80PJ-EXT Extension wire Kit.

INCLUDES: • (1) Type-K, Pipe Clamp Thermocouple Probe, 1.25-2.5 FEATURES: • The type K, thermocouples clamp securely to pipes for fast temperature and superheat measurement. • Durable ribbon sensor SPECIFICATIONS: • Unit Weight (KG): 0.233 • Unit Height (CM): 3.8 • Unit Length (CM): 30.5 • Unit Width (CM): 15.2 • For pipe diameters: 32 mm to 64 mm (1.25 in. to 2.5 in.) • Measurement range: -29 °C to149 °C (-20 °F to 300 °F) Type K, extra large thermocouple clamps securely to larger pipes for fast temperature and superheat measurement.

INCLUDES: • (1) K-Type Velcro Temperature Probe FEATURES: • Measurement Range: -30 ºC to 105 ºC (-22 ºF to 221 ºF) • Type: K (Chromel vs Alumel) • Use multiple and leave in place for route based routine maintenance SPECIFICATIONS: • Unit Weight (KG): 0.07 • Unit Height (CM): 2.2 • Unit Length (CM): 25.5 • Unit Width (CM): 12.8 • Measurement time (Time constant): 2 seconds • Maximum voltage: 24 V ac rms or 60 V dc maximum for proper safe operation • Maximum temperature: 150 ºC (302 ºF) The 80PK-11 is a Type-K Velcro Thermocouple Temperature Probe designed for HVAC temperature measuring applications. The 20 inch PVC cable terminates with a Type-K thermocouple inside a 19.5 inch nylon Velcro cuff. The 80PK-11 can be used with any temperature measuring instrument that is designed to accept Type-K thermocouples and has a miniature connector input. The 80PK-11 is not suitable for liquid immersion but can work in humid to wet environments.

INCLUDES: • (1) Type K Pipe Clamp Thermocouple Probe Kit, 0-2.5 • (1) Pipe Clamp Temperature Probe, Type K, 6 mm to 35 mm (80PK-8) • (1) Pipe Clamp Temperature Probe, Type K, 32 mm to 64 mm (80PK-10) • (1) Soft Carrying Case FEATURES: • Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces • Durable ribbon sensor • For pipe diameters 6.4 mm to 64 mm (0.25 in. to 2.5 in.): 80PK-8 - 6.4 mm to 34.9 mm (0.25 in. to 1.375 in.); 80PK-10 - 32 mm to 64 mm (1.25 in. to 2.5 in.) SPECIFICATIONS: • Unit Weight (KG): 0.784 • Unit Height (CM): 6.98 • Unit Length (CM): 25.4 • Unit Width (CM): 25.4 • Measurement range: -29 °C to 149 °C (-20 °F to 300 °F) The 80PK-18 Pipe Clamp Temperature Probe kit combines the standard 80PK-8 pipe clamp with the larger sized 80PK-10 pipe clamp, to give you a full range of measurement sizes. The Type K, thermocouples clamp securely to pipes for fast temperature and superheat measurement. The included soft carrying case allows you to conveniently keep both clamps close by for any situation.

INCLUDES: • (1) Suregrip Immersion Temperature Probe FEATURES: • Type-K thermocouple for use in liquids and gels • Measurement range:-40 - 1090°C • Type K standard grade Ni-Cr vs Ni-Al (Chromel vs Alumel) SPECIFICATIONS: • Unit Weight (KG): 0.14 • Unit Height (CM): 46 • Unit Length (CM): 3 • Unit Width (CM): 12.5 • Output: @ 25 °C (77 °F) = 1.00 mV (reference junction @ 0 °C) Fluke 80PK-22 SureGrip™ Immersion Temperature Probe is designed for use in liquid and gels. It can also be used as a general purpose temperature probe. The thermocouple junction is protected from tip to handle by an Inconel sheath. The 80PK-22 can be used with any temperature-measuring instrument that is designed to accept type K thermocouples and has a miniature connector input.

INCLUDES: • (1) Suregrip AIR Temperature Probe FEATURES: • Type-K thermocouple for use in aIR and non-caustic gas measurements • Bead protected by perforated baffle • Measurement range: -40 - 816ºC SPECIFICATIONS: • Unit Weight (KG): 0.141 • Unit Height (CM): 13 • Unit Length (CM): 45.9 • Unit Width (CM): 3.2 • Range: -40 °C to 293 °C (-40 °F to 559.4 °F), Accuracy: ±2.2 °C; Range: 293 °C to 816 °C (559.4 °F to 1500 °F), Accuracy: ±0.75 % • Output: @ 25 °C (77 °F) = 1.00 mV (reference junction @ 0 °C) • Measurement time (time constant)---3.0 seconds in 100 °C aIR moving at 3.33 meters/second (10.9 feet/ second) at sea level pressure (5 time constants = 1 complete step change, i.e., 15 seconds). The 80PK-24 SureGripTM Air Temperature Probe is designed for measuring the temperature of air or gases. The measuring bead of the probe is protected by a perforated 304 Stainless Steel baffle to prevent accidental damage. The sheath material is 300 Stainless Steel. The 38-inch (1 meter) cable is terminated with a Type K miniature thermocouple connector with 0.792-mm (.312-in) pin spacing. The 80PK-24 can be used with any temperature-measuring instrument that is designed to accept Type K thermocouples and has a miniature connector input.

INCLUDES: • (1) Suregrip Piercing Temperature Probe, K-Type FEATURES: • Type-K thermocouple suitable for food industry, liquids and gels • Measurement range: -40 °C to 350 °C (-40 °F to 662 °F) • Type K standard grade Ni-Cr vs Ni-Al (Chromel vs Alumel) SPECIFICATIONS: • Unit Weight (KG): 0.14 • Unit Height (CM): 3.2 • Unit Length (CM): 46 • Unit Width (CM): 12.5 • Output: @ 25 °C (77 °F) = 1.00 mV (reference junction @ 0 °C) • Measurement time (Time constant): 3.0 seconds in 100 °C still water at sea level pressure (5 time constants = 1 complete step change, i.e., 15 seconds) The 80PK-25 SureGripTM Piercing Temperature Probe is designed for use in liquids, gels, soft, and semi-hard materials. The probe is made of 316 stainless steel, which is suitable for food service use. The thermocouple junction of the probe is protected from tip to handle by the stainless teel sheath. The 40-inch (1-meter) cable is terminated with a Type K miniature thermocouple connector with 0.792-mm (.312-inch) pin spacing. The 80PK-25 can be used with any temperature-measuring instrument that is designed to accept Type K thermocouples and has a miniature connector input.

INCLUDES: • (1) Suregrip Tapered Temperature Probe FEATURES: • Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications • Measurement range: -40 - 816ºC • Type K standard grade Ni-Cr vs Ni-Al (Chromel vs Alumel) SPECIFICATIONS: • Unit Weight (KG): 0.14 • Unit Height (CM): 3 • Unit Length (CM): 45.8 • Unit Width (CM): 12.5 • Output: @ 25 °C (77 °F) = 1.00 mV (reference junction @ 0 °C) • Seebeck coefficient: 25 °C (77 °F) = 40.50 μV / °C • Measurement time (time constant): 3.0 seconds for air moving at 3.33 m / second (10.9 Ft. / second) at sea level pressure (5 time constants = 1 complete step change, i.e., 15 seconds) The 80PK-26 SureGripTM Tapered Temperature Probe is essentially a bead probe with a handle that can be used as a surface probe. The stainless steel sheath allows the bead to measure temperatures higher than bead probes with flexible leads. The handle also allows you to apply more focused surface pressure without having your hand in close proximity to the source. The 40-inch (1-meter) cable is terminated with a Type K miniature thermocouple connector with 0.792-mm (.312-in) pin spacing. The 80PK-26 can be used with any temperature-measuring instrument that is designed to accept Type K thermocouples and has miniature connector input.

INCLUDES: • (1) Suregrip Industrial Surface Temperature Probe FEATURES: • Type-K thermocouple for surfaces in rugged environment • Durable ribbon sensor • Measurement range: -127 to 600°C SPECIFICATIONS: • Unit Weight (KG): 0.18 • Unit Height (CM): 3 • Unit Length (CM): 45.8 • Unit Width (CM): 12.5 • Junction accuracy: -127 °C to 0 °C ±4.4 °C (-196.6 °F to 32 °F ± 7.92 °F), 0 °C to 183 °C ±2.2 °C (32 °F to 361 °F ±4.86 °F), 183 °C to 600 °C ±1.2 % of reading in °C (361 °F to 1112 °F ± <1.2 % of reading in °F) • Output: @ 25 °C (77 °F) = 1.00 mV (reference junction @ 0 °C) • Seebeck coefficient: 25 °C (77 °F) = 40.50 μV / °C • Measurement time (time constant): 1 time constant equals 330 ms; 5 time constants equal final reading. The 80PK-27 SureGripTM Industrial Surface Temperature Probe is designed for reliably measuring temperatures to 600 °C (1112 °F) on flat or slightly convex surfaces, while retaining a long service life.

INCLUDES: • (1) Surface Probe FEATURES: • Type-K thermocouple for flat or curved surfaces such as plates and rollers • Measurement range: 0 to 260 °C SPECIFICATIONS: • Measurement range: 0 - 260°C • Type: K (Chromel vs Alumel) • Output: @ 25 °C (77 °F) = 1.00 mV (reference junction @ 0 °C) • Seebeck coefficient: 25 °C (77 °F) = 40.50 μV / °C • Measurement time: (time constant): 3 sec typical on metal surface; 15 sec maximum for a 260°C change. Fluke temperature probes expand the functionality of Fluke thermometers. The 80PK-3A Type K Thermocouple Surface Probe is designed for measuring the temperature of flat or slightly convex surfaces, with an exposed junction to allow direct contact with the surface being measured. The probe can be used with any temperature-measuring instrument that is designed to accept type K thermocouples and has a miniature connector input.

INCLUDES: • (1) Type K General Purpose Probe FEATURES: • K-Type probe for use on surfaces and for insertion into aIR and non-caustic gases • Probe constructed with 304 stainless steel is compatible with K-type thermometers • Type-K thermocouple surface, aIR and non-caustic gases SPECIFICATIONS: • Unit Weight (KG): 0.06 • Unit Height (CM): 4.1 • Unit Length (CM): 30.5 • Unit Width (CM): 15.2 Fluke 80PK-9 K-Type, General Purpose, Surface/AIR/Gas/HVAC, Temperature Probe.

INCLUDES: • (1) Type K Extension Wire Kit • (1) Pair of male/female mini-connectors FEATURES: • Extending and repairing K-type thermocouple wires SPECIFICATIONS: • Unit Weight (KG): 0.05 • Unit Height (CM): 2.4 • Unit Length (CM): 25.7 • Unit Width (CM): 12.9 • Maximum continuous exposure temperature: 260ºC 80PK-EXT Extension wire Kit.

INCLUDES: • (1) Infrared Pistol-Rtd Probe FEATURES: • Probe type: RTD (resistance temperature detector) • Probe element: Platinum 1 KW • Temperature range: -40 - 260 °C (-40 - 500 °F) • For use with the Fluke 66 and Fluke 68 SPECIFICATIONS: • Unit Weight (KG): 0.06 • Unit Height (CM): 3.5 • Unit Length (CM): 30 • Unit Width (CM): 10 • Jack: 3.5 mm phono type • Probe diameter: 4.8 mm (.187 in.) • Probe length: 90 mm (3.5 in.) • Cable length (extended): 1000 mm (40 in.) The 80PR 60 probe expands the utility of your RTD non-contact infrared thermometer by allowing you to take contact temperature readings. You can make contact and non-contact readings at the same time because your RTD infrared thermometer displays the results of both. Just plug the temperature probe into the RTD jack, position the probe tip at or below the surface of your target, and start reading temperatures. (Refer to thermometer user manual for details.)