Milwaukee 0928-23 V28 Lithium-Ion 3-Pack Combo Kit

Milwaukee 0928-23 Specifications: • Voltage: 28V • Stroke Length: 1-1/8" • Sawzall Speed: 0-2,000/0-3,000 spm • Drill/Driver Speed: 0-600/0-1800 rpm • Torque: 600 in. lbs • No Load BPM: 0-9000/0-27,000 • Chuck Size: 1/2" • Clutch Settings: 20 • Work Light Run-Time: 5 hours Milwaukee 0928-23 Includes: • 28V Sawzall Recip Saw • 28V 1/2" Hammer-Drill/Driver (0724-20) • 28V Work Light (49-24-0185) • (2) 28V Lithium-Ion Battery Packs (48-11-2830) • One-Hour Charger (48-59-2801) • (2) Sawzall Blades • Side Handle • Clip-Lok • Bit • Contractor Bag Milwaukee 0928-23 Features: • Consistent power from the first cut to the last • 1-1/8" stroke for extremely fast cutting • Variable Speed trigger: 0-2000/0-3000spm • Exclusive gear protecting clutch • Heavy-duty 2 speed gear box: 0-600/0-1800rpm, 0-9000/0-27000bpm • Consistent power from the first hole to the last • 600 in. lbs. of torque • Ratcheting, single-sleeve chuck with carbide jaws • Clip-Lok system secures tool to belt with one hand • Clip-Lok System-ready • Faceted reflector, 140° pivoting head • 5 Hours of run time on single charge • Up to 2X the run time of 18V tools • Delivers up to 40-50% more power • 28 volts of power at 18 volt battery weight • Convenient battery fuel gauge shows charge level V28 weighs in...light You’d think a 28-volt system with heavy-duty power would weigh almost twice as much as an 18-volt system. Not so, says Meyer. “The V28 technology is so powerful and the weight of a 3.0 amp-hour, 28-volt battery is slightly less than a conventional 18-volt NiCd battery pack.” Fade-free power: Instead of the gradual but noticeable power decline users expect as a NiCd or NiMH battery pack discharges, the V28 Lithium-Ion cells maintain consistent power. Power doesn’t drop off drastically until the very last hole or cut. Corded tool power: The higher 3.0 amp-hr. output and 28 volts of muscle mean you can use V28 tools that in the past could only be available as corded. For example, the hammer-drill puts out 600 in.-lbs. of torque, and the circular saw cuts at 4,200 rpm, which is much closer to corded saw speeds than the 3,200 rpm found on NiCd models.