Fluke PRV240FS Proving Unit

INCLUDES: • (1) Proving Unit • (1) TPAK Hanging Strap • (4) AA Batteries • (1) Instruction Sheet FEATURES: • Reduce your risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment. • Prove functionality of the FieldSense measurement on the T6 electrical testers • Source both ac and dc steady-state voltage (supplies 240 V dc/ac). • Compatible with high impedance multimeters or clamp meters. • Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact • Includes TPAK magnetic hanging strap • Long battery life—2000 tests per set of four AA batteries (10 second test average) SPECIFICATIONS: • SAFETY RATING: IEC61010-1, IEC61010-2-030 • LED power indicator: Turns on when output voltage is present • Battery: 4 x AA Alkaline batteries NEDA 15 A IEC LR6 • Battery life: 1100 (10-second duration) test cycles with >1 MΩ load • Operating temperature: -10 °C to +50 °C • Operating humidity: 0 % to 90 % (0 °C to 35 °C)/ 0 % to 70 % (35 °C to 55 °C) • Operating altitude: 2000 m • Dimensions: 4.6" x 2.9" x 1.75" • Safety: IEC61010-1, IEC61010-2-030 • Warranty: One-year Verify your test tool without unnecessary exposure to shock and arc flash. Using the PRV240FS reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification of your tester or multimeter before tests are performed*. Additionally, the PRV240FS also provides ac and dc voltages for other HiZ instruments in your tool box. A single switch and a set of LEDs indicate functionality of both the FieldSense “no-test-lead” voltage measurement capability, plus standard ac and dc measurements with test leads. This unit is a simple-to-use solution for complying with TBT verification of your test tools. *PPE is still needed for absence of voltage testing when appropriate. Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.