Fluke 1750-TF/ET Three Phase Power Recorder w 1,000A Flexible Current Probes

INCLUDES: • (1) Windows 10 Tablet Computer • (1) USB/Ethernet Adapter • (1) Computer Power Supply • (1) Soft Case • (1) Yellow Cable • (1) Power Adapter Set • (1) Power Cord • (1) Wire Clip Set • (1) Handle • (1) TLS430 Test Lead Set • (1) SD Card • (1) CD • (1) Reg Card • (1) Carry Strap • (1) 4X 3210-PR-TF,1000A FEATURES: • Quick and reliable configuration: ARCHOS 43 Internet Tablet provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations • Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software – no need to worry about missed information due to incorrect setups • Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time • Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance • Reporting has never been easier: Auto Report creates either standard reports or customized reports with the minimum effort or hassle. • Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections • No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct • Measure every parameter: Voltage and current on three phases, neutral, and ground • 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events • Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection. SD card includes automatic download to SD when no other connection is made to the instrument. SPECIFICATIONS: • Input channels Voltage: 4 channels, AC/DC. Current: 5 channels. • Voltage channels: Input resistance: 2 MΩ / Input capacitance: < 20 pF • Measurement Type: True rms calculated continuously: every cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards • Frequency Measurement Range: 42.5 Hz to 69 Hz • Power Factor Measurement Range: 0.000 to 1.000 • Connector: RJ-45 • Speed and Type: 10/100 Base-T, auto MDIX • Communications Protocol: TCP/IP over ethernet • Voltage Terminals: 1100 V rms • Enclosure Protection: IP30 (per EN 60529) Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction. Records power disturbances and continuously monitors power quality parameters, including voltage, current, power, harmonics, flicker, and more. New Fluke 1750 Windows 10 Tablet: New Window's 10 Tablet for Control, Setup, Data Download and Analysis with Fluke 1750 in the field now included. This new tablet runs the full version of Fluke Energy Analyzer for instrument setup in the field and downloading with basic analysis. Setup and download is made by connecting the 1750 to the tablet via a wired Ethernet connection. The tablet has a detachable keyboard with two USB ports. The supplied Ethernet adapter connects to the other USB ports and then to the instrument via a standard Ethernet cable. Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.