Dixon 2960606C Push-On Hose Mender, Hose ID 3/8", Brass, 2.05" L

INCLUDES: • (1) Push-On Hose Mender, Hose ID 3/8", Brass, 2.05" L FEATURES: • No hose clamps or ferrules are needed • Trim hose end with smooth square cut • Lubricate either push-on fitting, hose or both • Insert push-on fitting into hose until first barb is in hose • Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end • Push with a steady force until end of hose is covered by yellow plastic cap • 0.92" L Barb • No hose clamps or ferrules are needed • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only • Caution: push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap • Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm • Do not use in connection with drinking water • Wash hands after handling SPECIFICATIONS: • Material: Brass • Component Material: Yellow Plastic Cap • Hose ID : 3/8" • Length: 2.05" • Pressure Rating : 350 PSI • Temperature Range: -40 to +150°F • Weight: 0.0510 lbs • Number of Barbs: 2 • Barb Length: .92" • Dimensions: 2.05" L • Nominal Size: 3/8" • Fitting/Connector Type: Mender Push-On Hose Mender, Brass, 3/8" Hose Inside Diameter (I.D.), 2.05" Length, Yellow Plastic Cap.