Amprobe 4416090 AT-2004-A Advanced Wire Tracer Kit for Energized, De-Energized and Open Wires

INCLUDES: • Amprobe AT-2004-A Advanced Wire Tracer • R-2000 Receiver • S-2600-A Transmitter 9-300V • T-2200 Transmitter for Open Tracing • A-2201CE Clamp-On Attachment • C2901 Cordset 110 Volt Plug to Banana Plugs • C2902 Cordset Alligator Clips to Banana Plugs FEATURES: • Detects and traces wires buried in walls and floors, up to 13 feet (4m) deep, as well as in plastic conduit, cable shield and computer cables • Traces energized wires and locates breakers without interrupting power • Traces de-energized wires (continuity and grounded wire) and pinpoints shorts and ground faults • Traces de-energized open (broken or disconnected) wires and locates the point where the wire is broken • Includes a clamp-on attachment for injecting a signal into wires when bare wire access isn't available • Does not interfere with sensitive electronic equipment, such as in hospitals and data centers SPECIFICATIONS: • Traces energized wires without power interruption: 9-300V (S2600-A Transmitter) • Locates breakers without power interruption: 9-300V (S2600-A Transmitter) • Traces unenergized wires (wire continuity and wire grounded at the end): S2600-A Transmitter and 9V batteries • Pinpoints place where wire is broken: T2200 Transmitter • Supplied with clamp-on attachment to inject signal without making a contact with bare wire: Yes The Amprobe AT-2004-A Advanced Wire Tracer is a circuit tracer that locates and traces energized and de-energized wires, breakers, neutrals, and grounds to identify shorts, ground faults, and broken wires. It detects and traces wires in walls, floors, conduit, and computer cables and does not interfere with sensitive electronic equipment. This makes it safe to use in hospitals and data centers. HOW IT WORKS : Connect the transmitter (T-2200 for de-energized lines or S-2600-A for energized circuits) to generate a signal, which is traceable by the R-2000 receiver. For tracing wires, the receiver will pick up the signal along the path of the wire allowing the user to trace the path of the wire behind ceilings, walls and floors. For opens and shorts (where wires are shorted or broken), the signal will break or stop as you are tracing along the wire indicating the location of the fault. For locating breakers, scan the breaker panel for the highest signal level indicating the breaker that is connected to the transmitter. Use the signal clamp accessory for applications where there is no access to bare conductors, the signal can be induced through the insulation of the wire using the clamp attachment (A-2201CE). ADDITONAL PRODUCT INFORMATION : The tracer includes the R-2000 receiver, which works with one of two transmitters. The T-2200 transmitter traces wire continuity and wire grounds on de-energized systems, while the S-2600 transmitter is compatible with energized 9 to 300 V alternating current (AC) or direct current (DC). The receiver can trace energized wires buried or hidden behind walls up to 13 feet deep. The AT-2004-A is designed for use by electricians and electrical contractors.