INCLUDES:
• (1) Holster,Belt,Accessory
FEATURES:
• Rugged fabric holster includes flap for lead storage
• Fits Fluke T3 testers
• Fits Fluke T5 testers
• Lead storage
• Rugged
• Simple
SPECIFICATIONS:
• Unit Weight (KG): 0.101
• Unit Height (CM): 3
• Unit Length (CM): 28.5
• Unit Width (CM): 11
This is an electrical tester accessory including a holster for your belt.
INCLUDES:
• (1) IR-Pistol-Holster
FEATURES:
• Durable nylon construction protects your thermometer while keeping it within reach
• Cuff hook attachment closure provide quick access and a secure closure
• Extra accessory pocket for storing temperature probe
SPECIFICATIONS:
• Unit Weight (KG): 0.084
• Unit Height (CM): 4
• Unit Length (CM): 10
• Unit Width (CM): 30
H6 Infrared Thermometer Holster.
Fluke H80M Protective Holster with Magnetic Hanging Strap
Regular price
$53.10
/
INCLUDES:
• (1) Protective Holster With Magnetic Hanging Strap
FEATURES:
• Yellow protective holster for all 80 series DMM's (new as well as old)
• General purpose hanger
• Hook and loop straps
SPECIFICATIONS:
• Unit Weight (KG): 0.32
• Unit Height (CM): 5.5
• Unit Length (CM): 30.4
• Unit Width (CM): 15.2
Now 80 Series owners can benefit from the Fluke Magnetic Hanging System. The easy-to-clean, snap-on holster absorbs shocks and protects your DMM, and is especially designed to hang from just about any metal surface.
INCLUDES:
• (1) Test Lead Holder
FEATURES:
• Heavy duty construction with mounting holes
SPECIFICATIONS:
• Unit Weight (KG): 0.33
• Unit Height (CM): 3.8
• Unit Length (CM): 35.6
• Unit Width (CM): 14
• Holder has 10 slots for wires up to 8 mm in diameter
• Over-all dimensions: 27.9 cm L x 8.9 cm W x 3.2 cm H
H900 Test Lead Holder.
Show 12 products per page Show 24 products per page Show 48 products per page
Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity
Show 12 products per page Show 24 products per page Show 48 products per page
Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity
INCLUDES:
• (1) Set of 2 Hook Clips
FEATURES:
• Maximum voltage: 600Vrms; CAT III per IEC 1010-2-031
• Maximum wire size: 2.5mm
• Contact material: Nickel plated steel
• For use with 120 Series
SPECIFICATIONS:
• Unit Weight (KG): 0.06
• Unit Height (CM):6.6
• Unit Length (CM): 13.3
• Unit Width (CM): 9.1
• Maximum voltage: 600 V rms. CAT III per IEC 1010-2-031
• Maximum wire size: 2.5 mm
HC120 Hook Clips (Set of 2: Red, Gray) designed for use with STL 120 Shielded Test Leads, VPS40 and TL75 Test Leads.
Show 12 products per page Show 24 products per page Show 48 products per page
Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity
Show 12 products per page Show 24 products per page Show 48 products per page
Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity
Show 12 products per page Show 24 products per page Show 48 products per page
Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity
INCLUDES:
• (1) AC Current Clamp
FEATURES:
• Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to 100 kHz without breaking into the circuit
• A passive filter eliminates noise and ring on rapidly rising di/dt waveform, ensuring accurate screen displays
• Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector
SPECIFICATIONS:
• Unit Weight (KG): 1.06
• Unit Height (CM): 6.5
• Unit Length (CM): 26.7
• Unit Width (CM): 17.6
Large AC Current Probe. The Fluke i1000s is a clamp-on ac current probe designed to expand oscilloscope applications in industrial and power environments. Ideal for measuring distorted current waveforms and harmonics.
Fluke I1010 AC/DC Current Clamp/Banana Plugs, 1A-600A AC/1A-1000A DC
Regular price
$418.49
/
INCLUDES:
• (1) AC/DC Current Clamp
• (1) Carry Case
FEATURES:
• Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.
• I1010 1-600A AC rms, 1-1000A DC current clamp
• Zippered vinyl carry case
SPECIFICATIONS:
• Unit Weight (KG): 0.84
• Unit Height (CM): 25.7
• Unit Length (CM): 29.3
• Unit Width (CM): 7.2
Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to theIR DMM.
INCLUDES:
• (1) 200 Amp Clamp, Current Output, Banana
FEATURES:
• Companion to a DMM to measure up to 200 A AC
• 1 mA per amp output guarantees easy reading on you meter
• Take accurate current readings without breaking the cIRcuit
• CAT III 600 V safety rating
SPECIFICATIONS:
• Unit Weight (KG): 0.403
• Unit Height (CM): 7.9
• Unit Length (CM): 27
• Unit Width (CM): 11.9
The i200 is a single range 200 A clamp-on AC Current Clamp with current output via safety shrouded banana plugs. The i200s is a dual range 20 A and 200 A clamp-on AC Current Clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana input. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
Fluke I2000 FLEX AC Current Flex Clamp/Banana Plugs, 20A-2000A AC Switchable
Regular price
$398.69
/
INCLUDES:
• (1) AC Current Flex Clamp/Banana Plugs
FEATURES:
• Three ranges: 20 A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
• Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
• Maximum conductor diameter 178 mm
• I2000 FLEX AC Clamp
SPECIFICATIONS:
• Unit Weight (KG): 0.618
• Unit Height (CM): 5.1
• Unit Length (CM): 27.4
• Unit Width (CM): 16.1
The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
INCLUDES:
• (1) 200 Amp Clamp, Voltage Output, BNC
FEATURES:
• Companion to your scopemeter, power quality meter or digital multimeter to measure up to 200 A AC
• Included adapter for DMM's
SPECIFICATIONS:
• Unit Weight (KG): 0.44
• Unit Height (CM): 7.8
• Unit Length (CM): 27
• Unit Width (CM): 12
• Two ranges: 20 A & 200 A, 10 or 100 mV/Amp output
The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs. Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.
Fluke I25 00-10 iFlex Flexible AC Current Clamp, 2500A AC, 10"
Regular price
$159.36
/
INCLUDES:
• (1) Iflex 2500A Probe 10"
FEATURES:
• 10 in. cable
• Expands measurement range to 2500A AC while providing increased display flexibility
• Ability to measure awkward sized conductors and improved wire access
• Safety rating(s): CAT IV 600V, CAT III 1000V
• 7.5 mm coil diameter allows measurement in tight spaces
• Ergonomic design allows easy operation with one hand
SPECIFICATIONS:
• Unit Weight (KG): 0.3
• Unit Height (CM): 6.7
• Unit Length (CM): 30
• Unit Width (CM): 20
The Fluke iFlex® flexible current probes expand the measurement range of the select Fluke clamp meters to 2500 A AC while providing the ultimate measurement flexibility.The Fluke iFlex® flexible current probes expand the measurement range of the select Fluke meters to 2500 A AC while providing the ultimate measurement flexibility. The iFlex® probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. Available in 25 cm (10 in) and 45 cm (18 in) sizes.
Fluke I25 00-18 iFlex Flexible AC Current Clamp, 2500A AC, 18"
Regular price
$159.36
/
INCLUDES:
• (1) Iflex 2500A Probe 18"
FEATURES:
• 18 in. cable
• Expands measurement range to 2500A AC while providing increased display flexibility
• Ability to measure awkward sized conductors and improved wire access
• Safety rating(s): CAT IV 600V, CAT III 1000V
• 7.5 mm coil diameter allows measurement in tight spaces
• Ergonomic design allows easy operation with one hand
SPECIFICATIONS:
• Unit Weight (KG): 0.3
• Unit Height (CM): 6
• Unit Length (CM): 29.7
• Unit Width (CM): 20.1
The Fluke iFlex® flexible current probes expand the measurement range of the select Fluke clamp meters to 2500 A AC while providing the ultimate measurement flexibility.The Fluke iFlex® flexible current probes expand the measurement range of the select Fluke meters to 2500 A AC while providing the ultimate measurement flexibility. The iFlex® probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. Available in 25 cm (10 in) and 45 cm (18 in) sizes.
Fluke I30 AC/DC Current Clamp/Banana Plugs, 30mA-20Arms AC/30mA-30A DC
Regular price
$494.99
/
INCLUDES:
• (1) AC/DC Current Clamp/Banana Plugs
FEATURES:
• Specified current range: 30 mA to 30 A dc, 30 mA to 20 A ac rms
• Usable current range: 5 mA to 30 A dc, 30 mA to 20 A ac rms
• Crest Factor: 1.4 in.
• Accuracy (at +25 °C): ± 1 % of reading ± 2 mA
• Resolution: ± 1 mA
• Conductor position sensitivity: ± 1 % relative to center reading
• Frequency range: DC to 20 kHz (- 0.5 dB)
• Temperature Coefficient: ± 0.01 % of reading/°C
• Power supply: 9 V alkaline, MN1604/PP3, 30 hours, low Battery indicator
SPECIFICATIONS:
• Unit Weight (KG): 0.432
• Unit Height (CM): 6.3
• Unit Length (CM): 25.2
• Unit Width (CM): 10.1
The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.
INCLUDES:
• (4) AC Current Probe
FEATURES:
• Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A output
• Ideal for current measurement on thick and hard-to-reach conductors without breaking the circuit
• Maximum conductor diameter 178 mm (7 in.)
• CAT III 600V safety rating
SPECIFICATIONS:
• Unit Weight (KG): 2.704
• Unit Height (CM): 17
• Unit Length (CM): 24.5
• Unit Width (CM): 21.8
• Current ranges: 30 A 300 A 3000 A AC rms
• Output sensitivity (AC-coupled): 100 mV 10 mV 1 mV per A
• Operating temperature range -20 degrees C to +90 degrees C
• Storage temperature range -40 degrees C to +105 degrees C
• Operating humidity 15 percent to 85 percent (non-condensing)
The i3000s Flex is an AC current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
INCLUDES:
• (1) AC Current Clamp
FEATURES:
• Optimized for measurement on power distribution system
• Ideal tools to extend the current ranges of Fluke tools
• For use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter.
SPECIFICATIONS:
• Unit Weight (KG): 2.42
• Unit Height (CM): 15.5
• Unit Length (CM): 43
• Unit Width (CM): 36
• Nominal current range: 30 A; 300 A; 3000 A
• Continuous current range: 1 A to 30 A; 1 A to 300 A; 1 A to 3000 A
• Maximum non-destructive current: 4000 A
• Basic Accuracy: 2% + 2 A (48-65 Hz) (% reading + floorspec)
• Useable frequency: 10 Hz - 100 kHz
• Output level(s): 10 mv/A; 1 mv/A; 0.1 mv/A
• CAT III, 600 V Safety Rating
• Maximum Voltage: 600 V AC
The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter. The clamp is optimized for measurement on power distribution systems. Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.
Fluke I3000S FLEX-24 AC Current Flex Clamp/BNC, 30A-3000A AC Switchable, 24"
Regular price
$530.99
/
INCLUDES:
• (1) AC Current Flex Clamp/BNC, 24"
FEATURES:
• Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A output
• Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
• Maximum conductor diameter 178 mm (7 in.)
• Also available in pack of 4 for use in Power Quality Analyzer
SPECIFICATIONS:
• Unit Weight (KG): 0.612
• Unit Height (CM): 4.8
• Unit Length (CM): 23
• Unit Width (CM): 15.8
The i3000s Flex is an AC current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
Fluke I3000S FLEX-36 AC Current Flex Clamp/BNC, 30A-3000A AC Switchable, 36"
Regular price
$620.99
/
INCLUDES:
• (1) AC Current Flex Clamp/BNC, 36"
FEATURES:
• Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A output
• Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
• Maximum conductor diameter 178 mm (7 in.)
• Also available in pack of 4 for use in Power Quality Analyzer
SPECIFICATIONS:
• Unit Weight (KG): 0.72
• Unit Height (CM): 5
• Unit Length (CM): 15.5
• Unit Width (CM): 23
The i3000s Flex is an AC current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
Fluke I30SAC/DC AC/DC Current Clamp/BNC, 30mA-20Arms AC/30mA-30A DC
Regular price
$602.99
/
INCLUDES:
• (1) AC/DC Current Clamp
FEATURES:
• Specified current range: 30 mA to 30 A dc, 30 mA to 20 A ac rms
• Usable current range: 5 mA to 30 A dc, 30 mA to 20 A ac rms
• Crest Factor: 1.4 in.
• Accuracy (at +25 °C): ± 1 % of reading ± 2 mA
• Resolution: ± 1 mA
• Conductor position sensitivity: ± 1 % relative to center reading
• Frequency range: DC to 20 kHz (- 0.5 dB)
• Temperature Coefficient: ± 0.01 % of reading/°C
• Power supply: 9 V alkaline, MN1604/PP3, 30 hours, low Battery indicator
SPECIFICATIONS:
• Unit Weight (KG): 0.46
• Unit Height (CM): 6.3
• Unit Length (CM): 25.3
• Unit Width (CM): 10
The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
INCLUDES:
• (1) AC/DC Current Clamp
FEATURES:
• Current Ranges: 30 A and 300 A ACRMS or ±45 A and 450 A DC
• Make contact thermometer measurements right away with the included Type-K thermocouple bead probe
SPECIFICATIONS:
• Load impedance: > 10 k Ohms and £ 100 pF
• Frequency range (small signal): DC to 20 kHz (- 3 dB)
• Phase shift below 1 kHz, < 2 degrees
• Temperature coefficient: ±0.1% of reading / °C
• Power supply: 9 V Alkaline
• Measuring ranges: ±45 A and 450 A dc
• Output sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A)
• Output sensitivity: 10 mV/A (40 A) to 1 mV/A (400 A)
The i310s current probe is based on Hall Effect technology for use in measurement of both DC and AC current. The i310s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.
