Products

INCLUDES: • (1) USB Stick • (1) USB Cable • (1) 3PHVL-1730 3-Phase + Neutral Voltage Test Lead • (1) Test Lead Set Red/Black 0.18m • (1) Test Lead Set Red/Black 1.5m • (4) Alligator Clips • (1) 173x/174x Soft Case • (1) Cable Marker Kit • (1) MP1-3R/1B-Magnet Probe 1 Set (3 Red, 1 Black) FEATURES: • Measure all three voltage and current phases plus the neutral current • Comprehensive logging • Measure with premium accuracy • Capture dips, swells and interruptions • Measure key power quality parameters • Optimized user interface • Flexible power supply • Rugged and reliable • Two external USB ports • Ethernet connectivity • Compact size • Highest safety rating in the industry • Optimized measurement accessories • "In-workshop" or "in-the-field" setup and download through PC application software: simple download using USB memory stick, WiFi download, wired ethernet connection or via USB cable • Energy Analyze plus application software: download and analyze every measured detail of energy consumption and power quality state-of-health with automated reporting • One touch reporting: create standardized reports according to commonly used standards like EN 50160, IEEE 519, GOST 33073 or export data in PQDIF or NeQual compatible format for use with third party software • Advanced analysis: choose any available logged parameter to create a highly customized view of logged measurements for advanced correlation of data SPECIFICATIONS: • Voltage Range: 100 V to 500 V using safety plug input when powering from the measurement circuit • Power Consumption: Maximum 50 VA (Max. 15 VA When Powered Using MA-C8 Adapter) • Efficiency: ≥ 68.2% (In Accordance with Energy Efficiency Regulations) • Maximum No-Load Consumption: <0.3 W Only When Powered Using IEC 60320 Input • Mains Power Frequency: 50/60 Hz ± 15% • Battery: Li-Ion 3.7 V, 9.2 Wh, Customer-Replaceable • On-Battery Run Time: Typically 4 Hours • Charging Time: <6 Hours • Resolution: 16-bit Synchronous Sampling • Input Signal Frequency: 50/60 Hz • Data Storage: Internal Flash Memory (Not User Replaceable) • Memory Size: Typical 20 Logging Sessions of 4 Weeks with 1-Minute Intervals and 500 Events • Number of Inputs: 4 (3 Phases Referenced to Neutral) • Maximum Input Voltage: 1000 Vrms, CF 1.7 • Input Impedance: 10 MΩ • Bandwidth: 42.5 Hz to 3.5 kHz • Scaling: 1:1 and Variable • Measurement Category : 1000 V CAT III/600 V CAT IV • Dimensions: 9.1" x 7.1" x 2.1" The Fluke 1740 Series three-phase loggers give you fast and easy access to the data you need to make critical power quality and energy decisions in real-time. Designed specifically for technicians and engineers who need the flexibility to troubleshoot, quantify energy usage and analyze power distribution systems. This model does not include an IFLEX probe. An optimized user interface, flexible current probes, and intelligent measurement verification function that allows you to digitally verify and correct connections makes setup easier than ever and reduces measurement uncertainty. Minimize your time in potentially hazardous environments and reduce the hassle of suiting up in PPE by using a wireless connection (WiFi) to view data directly in the field.

INCLUDES: • (1) Auxilliary Input Adapter FEATURES: • For use with Models 1736 and 1738 Auxilliary Input Adapter for Models 1736 and 1738

INCLUDES: • (1) 1.0M Test Lead Set Test Lead Set, 1000V CAT III, Non-stackable connectors; 1.0M; Red/Blk. 0.1 m Test leads are great for connecting measurement input to Fluke 17XX Power or Energy Loggers.

INCLUDES: • (1) 1.5M Test Lead Set Test Lead Set, 1000V CAT III, Non-stackable connectors; 1.5M; Red/Blk. 1.5 m test leads are great for connecting measurement input to Fluke 17XX Power or Energy Loggers.

INCLUDES: • (1) Battery Pack (BP291) • (1) Hang Strap • (1) Power Adapter (BC190/820) • (1) USB Interface Cable for PC Connection (USB-A to Mini-USB-B) • (1) Red 10:1 Voltage Probe, 500 MHz • (1) Blue 10:1 Voltage Probe, 500 MHz • (1) Black Hook Clip for Probe Tip • (1) Black Ground Lead with Mini Alligator Clip • (1) Black Ground Spring for Probe Tip • (1) Black Insulation Sleeve • (1) 50 Ohm (1W) Terminator • (1) Red and Black Test Lead Set with Test Pins • (1) User Manual and Safety Information FEATURES: • Two electrically isolated inputs • CAT III 1000V/CAT IV 600V safety rated • Bandwidth: 500 MHz bandwidth model • Maximum real-time sample rate (sampled simultaneously): 5 GS/s for each channel • Deep memory: 10,000 samples per channel waveform capture; zoom in on details • Dedicated 5000-count digital multimeter • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering • ScopeRecord roll mode, capture waveform sample data for up to 48 hours • TrendPlot, trend measurement readings for up to 22 days • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s) • IP-51 rated for dust and drip proof to withstand harsh environments • Isolated USB ports for memory devices and PC connectivity • Li-Ion battery for extended operating timespan: Up to 7 hours operation • Up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291 • Charge spare battery using optional external battery charger EBC290 • Easy-access battery door makes it easy to swap batteries • Handy slot to tether and lock down oscilloscope while unattended using standard Kensington lock SPECIFICATIONS: • Bandwidth: 500 MHz • Number of Channels: 2 channels • Real-time Sample Rate: 5 GS • Inputs: 4 scope or 2 scope plus DMM input • Independently floating isolated inputs: Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground • Input sensitivity: 2 mV-100 V/div • Trigger types: Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle • Trigger Source: Any scope input channel, or external via DMM input on 190-XX2, 2 channel models • Glitch capture: 8 ns • Scope Measurements: Cursor: 7, Automatic: 30 • Max. Record Length: ScopeRecord mode: 30,000 pts, Scope mode: 10,000 pts per input • Persistence: Digital persistence giving analog oscilloscope-like waveform decay • Waveform Compare: Waveform reference with automatic Pass/Fail testing The Fluke 190502AM 500 MHz, 2-Channel, 5 GS/s Color ScopeMeter Portable Oscilloscope with Built-in Digital Multimeter combines an unprecedented level of performance, ruggedness, and portability into one tool. The 190-502/AM is safety rated CAT III 1000V/CAT IV 600V and features deep memory of up to 10,000 samples per channel. You can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. This test tool is hand-held, battery operated and designed to meet the demands of field service professionals, such as plant maintenance engineers and technicians. This tough test tool goes into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications. The Fluke 190-502/AM is the one test tool you will reach for to tackle just about any troubleshooting task. It includes a multimeter, TrendPlot and ScopeRecord roll paperless recorder modes, and hands-free operation with Connect-and-View triggering, and much more.

INCLUDES: • (1) Fluke 190-502/AM/S ScopeMeter Portable Oscilloscope Test Tool Kit • (1) BC190 Battery • (1) Charger/Mains Adapter • (1) Li-ion Battery Pack • (1) VPS410 Voltage Probe Sets • (1) TL175 Test Leads • (1) Hang Strap • (1) Hand Strip • (1) Multi-Language User's Manual on CD-ROM • (1) FlukeView Software • (1) Carrying Case FEATURES: • 2 independent floating isolated inputs for making differential measurements • Flexibility and convenience of an integrated 5000 count digital multimeter • 500MHz bandwidth and 5 GS/sec high-speed sampling • CAT III 1000 V/CAT IV 600 V safety rated for high voltage environments • Connect-and-View™ for intelligent, automatic triggering on fast, slow and even complex signals • ScopeRecord™ Roll mode captures low frequency signal anomalies over minutes, hours, or days • TrendPlot™ paperless recorder mode trends meter measurements over days and weeks to identify signal changes • Automatic capture and replay of last 100 screens • Isolated USB host port for memory devices and PC connectivity • Up to 7 hours of standard battery operation and easy-access battery door for quick battery swaps in the field SPECIFICATIONS: • Bandwidth: 500 MHz • Number of Channels: 2 Channels • Real-time Sample Rate: 5 GS • Inputs: 4 scope or 2 scope plus DMM input • Independently floating isolated inputs: Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground • Input sensitivity: 2 mV-100 V/div • Trigger types: Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle • Trigger Source: Any scope input channel, or external via DMM input on 190-XX2, 2 channel models • Glitch capture: 8 ns • Scope measurements: Cursor: 7, Automatic: 30 • Maximum record length: ScopeRecord mode: 30,000 pts, Scope mode: 10,000 pts per input • Persistence: Digital persistence giving analog oscilloscope-like waveform decay • Waveform Compare: Waveform reference with automatic Pass/Fail testing Designed for plant maintenance engineers and technicians, the 190 ScopeMeter Series goes into harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications. Simplify electrical signal analysis and diagnose equipment failures in the field with the Fluke 190-502/S Kit. The portable oscilloscope offers the same performance as a bench scope with feature–rich capabilities to tackle just about any troubleshooting task. Designed for plant maintenance engineers and technicians, the 190 ScopeMeter® Series goes into harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications. The Fluke 190-502 two-channel portable oscilloscope features a CAT III 1000V/CAT IV 600V safety rating and is IP-51 rated to withstand harsh environments. Get unprecedented ease-of-use with Connect-and-View™ triggering to capture and analyze waveforms hands free. With 500MHz bandwidth and real-time sampling rates up to 5 GS/sec, you can quickly and easily capture noise and other disturbances to quickly make sense of your signals and eliminate the tedium of troubleshooting.

INCLUDES: • (1) Battery Pack (BP291) • (1) Hang Strap • (1) Power Adapter (BC190/820) • (1) USB Interface Cable for PC Connection (USB-A to Mini-USB-B) • (1) Red 10:1 Voltage Probe, 500 MHz • (1) Blue 10:1 Voltage Probe, 500 MHz • (1) Gray 10:1 Voltage Probe, 500 MHz • (1) Green 10:1 Voltage Probe, 500 MHz • (1) Black Hook Clip for Probe Tip • (1) Black Ground Lead with Mini Alligator Clip • (1) Black Ground Spring for Probe Tip • (1) Black Insulation Sleeve • (1) 50 Ohm (1W) Terminator • (1) Red and Black Test Lead Set with Test Pins FEATURES: • Four electrically isolated inputs • CAT III 1000V/CAT IV 600V safety rated • Bandwidth: 500 MHz • Maximum real-time sample rate (sampled simultaneously): 5 GS/s for each channel • Deep memory: 10,000 samples per channel waveform capture; zoom in on details • Dedicated 999-count digital multimeter • Four meter measurements via scope BNC inputs in four-channel models • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering • ScopeRecord roll mode, capture waveform sample data for up to 48 hours • TrendPlot, trend measurement readings for up to 22 days • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s) • IP-51 rated for dust and drip proof to withstand harsh environments • Isolated USB ports for memory devices and PC connectivity • Li-Ion battery for extended operating time span: Up to 7 hours operation • Charge spare battery using optional external battery charger • Easy-access battery door makes it easy to swap batteries • Handy slot to tether and lock down oscilloscope while unattended using standard Kensington lock The Fluke 190504AM 500 MHz, 4-Channel, 5 GS/s Color ScopeMeter Portable Oscilloscope with Built-in Digital Multimeter combines an unprecedented level of performance, ruggedness, and portability into one tool. The 190-504/AM is safety rated CAT III 1000V/CAT IV 600V and features deep memory of up to 10,000 samples per channel. You can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. This test tool is hand-held, battery operated and designed to meet the demands of field service professionals, such as plant maintenance engineers and technicians. This tough test tool goes into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications. The Fluke 190-504/AM is the one test tool you will reach for to tackle just about any troubleshooting task. It includes a multimeter, TrendPlot and ScopeRecord roll paperless recorder modes, and hands-free operation with Connect-and-View triggering, and much more.

INCLUDES: • (1) Battery Pack (BP291) • (1) Hang Strap • (1) Universal Power Adapter (BC190/808) • (1) USB Interface Cable for PC Connection (USB-A to Mini-USB-B) • (1) Red 10:1 Voltage Probe, 500 MHz • (1) Blue 10:1 Voltage Probe, 500 MHz • (1) Gray 10:1 Voltage Probe, 500 MHz • (1) Green 10:1 Voltage Probe, 500 MHz • (1) Black Hook Clip for Probe Tip • (1) Black Ground Lead with Mini Alligator Clip • (1) Black Ground Spring for Probe Tip • (1) Black Insulation Sleeve • (1) 50 Ohm (1W) Terminator • (1) Red and Black Test Lead Set with Test Pins • (1) Hard Carrying Case FEATURES: • Four electrically isolated inputs • CAT III 1000V/CAT IV 600V safety rated • Bandwidth: 500 MHz • Maximum real-time sample rate (sampled simultaneously): 5 GS/s for each channel • Deep memory: 10,000 samples per channel waveform capture; zoom in on details • Dedicated 999-count digital multimeter • Four meter measurements via scope BNC inputs in four-channel models • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering • ScopeRecord roll mode, capture waveform sample data for up to 48 hours • TrendPlot, trend measurement readings for up to 22 days • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s) • IP-51 rated for dust and drip proof to withstand harsh environments • Isolated USB ports for memory devices and PC connectivity • Li-Ion battery for extended operating timespan: Up to 7 hours operation • Charge spare battery using optional • Easy-access battery door makes it easy to swap batteries • Handy slot to tether and lock down oscilloscope while unattended using standard Kensington lock SPECIFICATIONS: • Bandwidth: 500MHz • Channels: 4 • Display Type: LCD - Color • Interface: USB • Memory Size: 30kpts • Function: Record, Save, Trend, DMM • Probe Type: Passive 10:1 (4) • Sampling Rate (Per Second): 5G • Input Impedance: 1M - 14pF • Rise Time (Typ): 700ps • Voltage - Input (Max): CAT III 1000V, CAT IV 600V • Voltage - Supply: 7.2VDC Battery, 17.8VDC Adapter The Fluke 190504UNS 500 MHz, 4-Channel, 5 GS/s Color ScopeMeter Portable Oscilloscope with Built-in Digital Multimeter, Model BC190/808 and Accessories combines an unprecedented level of performance, ruggedness, and portability into one tool. The 190-504/UN/S is safety rated CAT III 1000V/CAT IV 600V and features deep memory of up to 10,000 samples per channel. You can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. This test tool is hand-held, battery operated and designed to meet the demands of field service professionals, such as plant maintenance engineers and technicians. This tough test tool goes into harsh, dirty, and hazardous industrial conditions to test everything from micro-electronics to power electronics applications. The Fluke 190-504/UN/S is the one test tool you will reach for to tackle just about any troubleshooting task. It includes a multimeter, TrendPlot and ScopeRecord roll paperless recorder modes, and hands-free operation with Connect-and-View triggering, and much more.

INCLUDES: • (1) Test lead set • (4) i430 Thin flexible current probes • (1) Battery • (1) Power adapter • (1) Combination WiFi/SD card • (1) Soft carry case • (1) CD Rom with PowerLog 430-II software and user documentation FEATURES: • Measure key parameters like speed, torque and mechanical power without mechanical sensor all while the motor is in service simply by using three-phase input measurements • Calculate Mechanical Power and Efficiency without the need of mechanical sensors • Automatically calculate motor derating according to NEMA/IEC guidelines • Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency • PowerWave data technology captures fast RMS data, and shows half-cycle averages and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc. • Identify power quality issues such as dips, swells, transients, harmonics and unbalance • Waveform capture function captures 100/120 cycles (50/60 Hz) of each event detected event, in all modes, without set-up • Automatic transient mode captures waveform data at 200 kS/s on all phases simultaneously up to 6 kV • Fluke Connect® compatible* – view data locally on the instrument, via Fluke Connect mobile app and PowerLog 430-II desktop software • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance. • Calculates mechanical power and efficiency without mechanical sensors. Just connect to the input conductors • Measures electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency • Uses PowerWave data capture to capture fast RMS data, and show half-cycle averages and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.) • Offers waveform capture function to capture 100/120 cycles (50/60 Hz) of each detected event, in all modes, without set-up • Uses automatic transient mode to capture waveform data at 200 kS/s on all phases simultaneously up to 6 kV SPECIFICATIONS: • Motor Type: 3 phase asynchronous (induction) • Power Source: Variable Frequency Drive • Motor Frequency Range: 40Hz to 70Hz • Over/Under Voltage from Nominal V/f Curve (%): -15% to +15% • Carrier Frequency Range: 2.5kHz–20kHz • Inverter Type: VSI only (voltage controlled) * • Control Method: V/f control, open-loop vector, closed loop vector, drives with encoders. • Frequency: 40 to 70 Hz • Inverter Type: CSI (current source inverter) • Motors type: Synchronous (DC, stepper, permanent magnet etc.) • Motor Frequency: <40 and >70 Hz The ideal portable motor analysis test tool, the 438-II can help locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems, while giving technicians the mechanical and electrical information they need to effectively evaluate motor performance. The Fluke 438-II Power Quality and Motor Analyzer adds key mechanical measurement capabilities for electric motors to the advanced power quality analysis functions of the Fluke 435 Series II Power Quality Analyzers. Quickly and easily measure and analyze key electrical and mechanical performance parameters such as power, harmonics, unbalance, motor speed, torque and mechanical power without the need of mechanical sensors. Fluke 434-II, 435-II and 437-II Power Quality Analyzer users can add motor analysis capabilities to their existing units with the Fluke-438-II/MA Motor Analyzer upgrade kit.

INCLUDES: • (1) Test lead set • (1) Battery • (1) Power adapter • (1) 8GB SD card • (1) Soft carry case • (1) CD Rom with PowerLog 430-II software and user documentation FEATURES: • Measure key parameters like speed, torque and mechanical power without mechanical sensor all while the motor is in service simply by using three-phase input measurements • Calculate Mechanical Power and Efficiency without the need of mechanical sensors • Automatically calculate motor derating according to NEMA/IEC guidelines • Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency • PowerWave data technology captures fast RMS data, and shows half-cycle averages and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc. • Identify power quality issues such as dips, swells, transients, harmonics and unbalance • Waveform capture function captures 100/120 cycles (50/60 Hz) of each event detected event, in all modes, without set-up • Automatic transient mode captures waveform data at 200 kS/s on all phases simultaneously up to 6 kV • Fluke Connect® compatible* – view data locally on the instrument, via Fluke Connect mobile app and PowerLog 430-II desktop software • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance. • Calculates mechanical power and efficiency without mechanical sensors. Just connect to the input conductors • Measures electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency • Uses PowerWave data capture to capture fast RMS data, and show half-cycle averages and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.) • Offers waveform capture function to capture 100/120 cycles (50/60 Hz) of each detected event, in all modes, without set-up • Uses automatic transient mode to capture waveform data at 200 kS/s on all phases simultaneously up to 6 kV SPECIFICATIONS: • Motor Type: 3 phase asynchronous (induction) • Power Source: Variable Frequency Drive • Motor Frequency Range: 40Hz to 70Hz • Over/Under Voltage from Nominal V/f Curve (%): -15% to +15% • Carrier Frequency Range: 2.5kHz–20kHz • Inverter Type: VSI only (voltage controlled) * • Control Method: V/f control, open-loop vector, closed loop vector, drives with encoders. • Frequency: 40 to 70 Hz • Inverter Type: CSI (current source inverter) • Motors type: Synchronous (DC, stepper, permanent magnet etc.) • Motor Frequency: <40 and >70 Hz The ideal portable motor analysis test tool, the 438-II can help locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems, while giving technicians the mechanical and electrical information they need to effectively evaluate motor performance. The Fluke 438-II Power Quality and Motor Analyzer adds key mechanical measurement capabilities for electric motors to the advanced power quality analysis functions of the Fluke 435 Series II Power Quality Analyzers. Quickly and easily measure and analyze key electrical and mechanical performance parameters such as power, harmonics, unbalance, motor speed, torque and mechanical power without the need of mechanical sensors. Fluke 434-II, 435-II and 437-II Power Quality Analyzer users can add motor analysis capabilities to their existing units with the Fluke-438-II/MA Motor Analyzer upgrade kit.

INCLUDES: • (1) Fluke 830 Laser Alignment Tool • (1) Laser sensor • (1) Laser prism • (2) Chain-type mounting bracket with 150 mm support posts • (4) 300 mm support post • (1) Micro fiber cleaning cloth • (1) Sensor cable • (1) PC cable • (1) USB drive • (1) USB drive cable • (1) Tape measure • (1) Wireless Bluetooth® module • (1) Power adapter • (1) Instruction kit and carrying case FEATURES: • Easy to use tool for precision alignment of rotating shafts • Features single laser measurement technology to reduce errors from backlash and enhance accuracy • Provides an intuitive, guided user interface to quickly and easily complete machine alignments • Includes compass measurement mode to enable flexible, reliable, and repeatable measurements using an activated electronic inclinometer • Includes a unique “All-in-One” result screen that shows both coupling results and vertical and horizontal feet corrections, making it easy to take corrective action • Features a dynamic machine tolerance check that provides continuous evaluation of alignment adjustments so you know when your machine is in the acceptable range • Offers unique extend mode to handle gross misalignment by virtually increasing laser detector size • Provides auto save and resume capability to ensure your data is there when you need it SPECIFICATIONS: • Sensor Measurement Principle: Coaxial, reflected laser beam • Sensor Environmental Protection: IP 67 (submersible, dustproof) • Sensor Detector: Measurement area: Unlimited, dynamically extendible (U.S. Patent 6,040,903) Resolution: 1μm; Accuracy (avg): > 98% • Prism Type: 90° roof prism; Accuracy (avg): > 99% • Prism Environmental Protection: IP 67 (submersible, dustproof) It's a known fact - all rotating machinery is susceptible to misalignment. If you're still using rulers and dial indicators to ensure your rotating machinery is properly aligned, you could be losing thousands of dollars per year in replacement bearing costs, hours of unnecessary repair time, and crippling unplanned downtime, not to mention taking years off your machine's useful life. The Fluke 830 Laser Shaft Alignment tool is easy-to-use, giving you fast, accurate and actionable answers that will keep your plant up and running. When it comes to laser shaft alignment, data is good but answers are better. Unlike using the straightedge method or dial indicators the Fluke 830 performs the complicated alignment calculations for you, meaning you'll have the answers you need to quickly align your machine and get your plant up and running fast. An enhanced user interface provides easy to understand results that don't require extensive alignment knowledge and the unique "All-in-One" result screen that shows you both coupling results and feet corrections (vertical and horizontal) in real terms making it easy to take corrective action. Since machine downtime is costly, test repeatability is critical. The Fluke 830 uses a patented single laser precision alignment system that provides accurate and repeatable measurement results so you can be assured you're addressing misalignment problems properly.

INCLUDES: • (1) T5-1000 • (1) PRV240 FEATURES: • T5-1000 Measures AC/DC Voltage to 1000V, AC Current to 100A, Resistance to 1000 Ohms • T5-1000 DCV Accuracy: ±(1% + 1 digit) • T5-1000 Has Continuity Beeper • T5-1000 Checks Current without Breaking Circuit • T5-1000 Test Leads Are Built In • T5-1000 Compact: 8" High, 10 Oz. • PRV240 Using the PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment • PRV240 Sources both ac and dc steady-state voltage—supplies 240 V dc/ac • PRV240 A single LED indicates functionality, making this unit a simple-to-use solution for complying with TBT verification of your test tool • PRV240 Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers • PRV240 Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact • PRV240 Includes TPak™ Magnetic Hanging Strap • PRV240 Long battery life—5,000 tests per set of four AA batteries SPECIFICATIONS: • Output Voltage: 240 V ac rms or dc (± 10 % ? 1 M?); LoZ >3 kO load (60 V ac typical, 50 V ac rms minimum) • LED power indicator: Turns on when output voltage is present • Battery: 4 AA Alkaline batteries NEDA, 24 A IEC LR03 • Battery life: 5000 (5-second duration) test cycles with >1 MO load, 300 tests minimum with >3 kO load • Operating temperature: -10 °C to +50 °C • Operating humidity: 0 % to 90 % (0 °C to 35 °C), 0 % to 70 % (35 °C to 55 °C) • Operating altitude: 2000 m • Dimensions: 4.6" x 2.9" x 1.1" • Pollution Degree: 2 • Safety: IEC61010-1, IEC61010-2-030 • Warranty: One-year • Electromagnetic Compatibility (EMC): Portable EM environment; CISPR 11, Group 1, Class A; 47 CFR 15 subpart B, this product is considered an exempt device per clause 15.103; Class A Equipment (Industrial Broadcasting & Communication Equipment) Fluke proving unit kits combine the PRV420 proving unit with either a Fluke multimeter, clamp meter, or electrical tester providing you optimal flexibility based on your application requirements. These kits are ideal for electrical maintenance personnel, electrical contractors, and electricians in the electrical, oil and gas, utilities markets, and more. These kits, with included PRV240 proving unit, are designed for safety and compliance applying the concept of test before touch (TBT) that involves testing your meter against a known live source before and after measurements. This verifies that your test tool is operating properly during the actual measurement without exposing yourself to shock or arc flash.

INCLUDES: • (1) Handstrap FEATURES: • Handstrap for TiX560, TiX520 and TiX500 Thermal Imagers • Adjustable • Strong and durable • Great for prolonged sessions • Designed for ergonomic use SPECIFICATIONS: • Color: Black Handstrap for TiX560, TiX520 and TiX500 Thermal Imagers. Easy to hold the camera and use it for extended period of time inspecting hard to reach areas.

INCLUDES: • (1) Neckstrap FEATURES: • Neckstrap for Fluke TiX560, TiX520 and TiX500 Thermal Imagers. • Adjustable • Strong and durable • Great for prolonged sessions • Designed for ergonomic use SPECIFICATIONS: • Color: Black Neckstrap for Fluke TiX560, TiX520 and TiX500 Thermal Imagers. Easy to strap the camera and use it for extended period of time inspecting hard to reach areas.

INCLUDES: • (1) Fiber Optic Meter FEATURES: • A variety of light sources and patch cords let you get just what you need for testing different cable types and lengths • Highly accurate readings mean less work, less repeated testing • Light sources and patch cords sold separately • LED low Battery indicator SPECIFICATIONS: • Unit Weight (KG): 0.318 • Unit Height (CM):6.4 • Unit Length (CM): Unit Length (CM): 27.9 • Unit Width (CM): 19.1 The Fluke Fiber Optic Meter (FOM) helps you test and maintain fiber optic cable without having to buy a whole new meter. Plug the FOM directly into any DMM with a mV dc function and a 10 M? input impedance and quickly and accurately verify fiber optic cable system loss. Light sources and patch cords sold separately.

INCLUDES: • (1) Fiber Optic Source (850) FEATURES: • Measures optical power on fiber optic cables • A variety of light sources allow you to test different cable lengths SPECIFICATIONS: • Unit Weight (KG): 0.26 • Unit Height (CM):5.5 • Unit Length (CM): 28 • Unit Width (CM): 18 • Application range: 800 - 1600 nm FOS-850 Fiber Optic Light Source.

INCLUDES: • (1) Fiber Optic Source (850/1300) FEATURES: • Measures optical power on fiber optic cables • A variety of light sources allow you to test different cable lengths SPECIFICATIONS: • Unit Weight (KG): 0.273 • Unit Height (CM):13.7 • Unit Length (CM): 30.9 • Unit Width (CM): 26.2 • Application range: 800 - 1600 nm FOS-850/1300 Fiber Optic Light Source.

INCLUDES: • (2) Fuse Test Probe Set FEATURES: • Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating • Fluke fuse part number 803293 • Probes allow indication of live voltage even with blown fuse* • 2 mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads • TL224 leads are right angle connector on one end and straight connector on the other with reinforced strain reliefs, 1.5 meter silicone – insulated wire resists heat and cold • Operating temperature – 20 °C to 50 °C (-5 °F to 120 °F) • CAT III 1000 V, CAT IV 600 V, 10 A rating SPECIFICATIONS: • Unit Weight (KG): 0.108 • Unit Height (CM): 3 • Unit Length (CM): 30 • Unit Width (CM): 9.6 SureGrip Fused Test Probes with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes mount onto any standard modular test leads, for instance the Fluke TL221, TL222, or TL224. Rated to CAT III 1000V, these probes have removable tip guards for reduced probe tip exposure.

INCLUDES: • (2) Fuse Test Probe Set With Test Leads FEATURES: • Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating • Fluke fuse part number 803293 • CAT III 1000 V, CAT IV 600 V, 10 A rating • Probes allow indication of live voltage even with blown fuse SPECIFICATIONS: • Unit Weight (KG): 0.196 • Unit Height (CM): 3.3 • Unit Length (CM): 30.3 • Unit Width (CM): 10 SureGrip Fused Test Probe and Test Lead set with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes ship with the Fluke TL224 silicone test leads. Rated to CAT III 1000 V, these probes have removable tip guards for reduced probe tip exposure.

INCLUDES: • (1) USB/IR Cable • (1) Software Disc • (1) User Manual FEATURES: • Displays acquIRed results in graphs and tables • Allows you to save and print results • Allows you to retrieve and view previously saved results • Allows you to transfer collected readings to other PC applications • Provides standard form templates to display results professionally SPECIFICATIONS: • Unit Weight (KG): 0.32 • Unit Height (CM): 4.6 • Unit Length (CM): 24.3 • Unit Width (CM): 20.5 Expand the power of the world's most rugged, accurate handheld test tools with FlukeView Forms Documenting Software. To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents.

INCLUDES: • (1) Flukeview Forms W/Cable For 8845/8846 • (1) USB/IR Cable • (1) Software Disc • (1) User Manual FEATURES: • Document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents • FlukeView Forms Basic, included with 8845A/8846A, transfers data points from the meter to a PC, displays readings in table or graphical form • For a larger array of forms, or to use FlukeView Forms Designer to customize your forms, upgrade to FlukeView Forms version 3.0 with FVF-UG • Operating system for FlukeView Forms Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8 or Windows 10 • Minimum PC hardware Pentium class or better microprocessor,32 MB RAM,70 MB hard disk space (100 MB to install),Serial or USB port SPECIFICATIONS: • Unit Weight (KG): 0.372 • Unit Height (CM): 4.4 • Unit Length (CM): 24.3 • Unit Width (CM): 20.5 • Size: 203 x 100 x 50 mm FlukeView Forms with Cable for 8845/8846.

INCLUDES: • (1) Flukeview Forms - Basic For 8845/8846 • (1) User Manual FEATURES: • Document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents • FlukeView Forms Basic, included with 8845A/8846A, transfers data points from the meter to a PC, displays readings in table or graphical form • For a larger array of forms, or to use FlukeView Forms Designer to customize your forms, upgrade to FlukeView Forms version 3.0 with FVF-UG SPECIFICATIONS: • Unit Weight (KG): 0.449 • Unit Height (CM): 13.97 • Unit Length (CM): 30.48 • Unit Width (CM): 25.4 FlukeView Forms for 8845/8846.

INCLUDES: • (1) Flukeview Forms Upgrade FEATURES: • Displays acquired results in graphs and tables • Allows you to save and print results • Allows you to retrieve and view previously saved results • Allows you to transfer collected readings to other PC applications • Provides standard form templates to display results professionally • Includes FlukeView Forms Designer program for creating customized form templates (not included in FlukeView Forms Basic) SPECIFICATIONS: • Unit Weight (KG): 0.41 • Unit Height (CM): 5.1 • Unit Length (CM): 25.4 • Unit Width (CM): 20.4 Expand the power of the world's most rugged, accurate handheld test tools with FlukeView Forms Documenting Software. To address the increasing demands for reporting and documentation, Fluke presents FlukeView Forms documenting software. FlukeView Forms increases the power of your Fluke tool by enabling you to document, store and analyze individual readings or series of measurements, then convert them into professional-looking documents.

INCLUDES: • (1) Holster With Accessory Pocket, 333 - 337 Clamp Meters FEATURES: • Fabric holster absorbs shocks and protects meter from rough handling • Built-in pocket for lead storage • Convenient belt-loop with snap SPECIFICATIONS: • Unit Weight (KG): 0.11 • Unit Height (CM): 2.5 • Unit Length (CM): 38.8 • Unit Width (CM): 10.2 H3 Clamp Meter Holster.