Products

INCLUDES: • (1) Flexible Current Probe • (1) USB Stick • (1) USB Cable • (1) 3PHVL-1730 3-Phase + Neutral Voltage Test Lead • (1) Test Lead Set Red/Black 0.18m • (1) Test Lead Set Red/Black 1.5m • (4) Alligator Clips • (1) 173x/174x Soft Case • (1) Cable Marker Kit • (1) MP1-3R/1B-Magnet Probe 1 Set (3 Red, 1 Black) FEATURES: • Measure all three voltage and current phases plus the neutral current • Comprehensive logging • Measure with premium accuracy • Capture dips, swells and interruptions • Measure key power quality parameters • Optimized user interface • Flexible power supply • Rugged and reliable • Two external USB ports • Ethernet connectivity • Compact size • Highest safety rating in the industry • Optimized measurement accessories • "In-workshop" or "in-the-field" setup and download through PC application software: simple download using USB memory stick, WiFi download, wired ethernet connection or via USB cable • Energy Analyze plus application software: download and analyze every measured detail of energy consumption and power quality state-of-health with automated reporting • One touch reporting: create standardized reports according to commonly used standards like EN 50160, IEEE 519, GOST 33073 or export data in PQDIF or NeQual compatible format for use with third party software • Advanced analysis: choose any available logged parameter to create a highly customized view of logged measurements for advanced correlation of data SPECIFICATIONS: • Voltage Range: 100 V to 500 V using safety plug input when powering from the measurement circuit • Power Consumption: Maximum 50 VA (Max. 15 VA When Powered Using MA-C8 Adapter) • Efficiency: ≥ 68.2% (In Accordance with Energy Efficiency Regulations) • Maximum No-Load Consumption: <0.3 W Only When Powered Using IEC 60320 Input • Mains Power Frequency: 50/60 Hz ± 15% • Battery: Li-Ion 3.7 V, 9.2 Wh, Customer-Replaceable • On-Battery Run Time: Typically 4 Hours • Charging Time: <6 Hours • Resolution: 16-bit Synchronous Sampling • Input Signal Frequency: 50/60 Hz • Data Storage: Internal Flash Memory (Not User Replaceable) • Memory Size: Typical 20 Logging Sessions of 4 Weeks with 1-Minute Intervals and 500 Events • Number of Inputs: 4 (3 Phases Referenced to Neutral) • Maximum Input Voltage: 1000 Vrms, CF 1.7 • Input Impedance: 10 MΩ • Bandwidth: 42.5 Hz to 3.5 kHz • Scaling: 1:1 and Variable • Measurement Category : 1000 V CAT III/600 V CAT IV • Dimensions: 9.1" x 7.1" x 2.1" The Fluke 1740 Series three-phase loggers give you fast and easy access to the data you need to make critical power quality and energy decisions in real-time. Designed specifically for technicians and engineers who need the flexibility to troubleshoot, quantify energy usage and analyze power distribution systems. The IFLEX probe is 23 in. by 60 cm and up to 1500A. An optimized user interface, flexible current probes, and intelligent measurement verification function that allows you to digitally verify and correct connections makes setup easier than ever and reduces measurement uncertainty. Minimize your time in potentially hazardous environments and reduce the hassle of suiting up in PPE by using a wireless connection (WiFi) to view data directly in the field.

INCLUDES: • (1) Flexible Current Probe • (1) USB Stick • (1) USB Cable • (1) 3PHVL-1730 3-Phase + Neutral Voltage Test Lead • (1) Test Lead Set Red/Black 0.18m • (1) Test Lead Set Red/Black 1.5m • (4) Alligator Clips • (1) 173x/174x Soft Case • (1) Cable Marker Kit • (1) MP1-3R/1B-Magnet Probe 1 Set (3 Red, 1 Black) FEATURES: • Measure all three voltage and current phases plus the neutral current • Comprehensive logging • Measure with premium accuracy • Capture dips, swells and interruptions • Measure key power quality parameters • Optimized user interface • Flexible power supply • Rugged and reliable • Two external USB ports • Ethernet connectivity • Compact size • Highest safety rating in the industry • Optimized measurement accessories • "In-workshop" or "in-the-field" setup and download through PC application software: simple download using USB memory stick, WiFi download, wired ethernet connection or via USB cable • Energy Analyze plus application software: download and analyze every measured detail of energy consumption and power quality state-of-health with automated reporting • One touch reporting: create standardized reports according to commonly used standards like EN 50160, IEEE 519, GOST 33073 or export data in PQDIF or NeQual compatible format for use with third party software • Advanced analysis: choose any available logged parameter to create a highly customized view of logged measurements for advanced correlation of data SPECIFICATIONS: • Voltage Range: 100 V to 500 V using safety plug input when powering from the measurement circuit • Power Consumption: Maximum 50 VA (Max. 15 VA When Powered Using MA-C8 Adapter) • Efficiency: ≥ 68.2% (In Accordance with Energy Efficiency Regulations) • Maximum No-Load Consumption: <0.3 W Only When Powered Using IEC 60320 Input • Mains Power Frequency: 50/60 Hz ± 15% • Battery: Li-Ion 3.7 V, 9.2 Wh, Customer-Replaceable • On-Battery Run Time: Typically 4 Hours • Charging Time: <6 Hours • Resolution: 16-bit Synchronous Sampling • Input Signal Frequency: 50/60 Hz • Data Storage: Internal Flash Memory (Not User Replaceable) • Memory Size: Typical 20 Logging Sessions of 4 Weeks with 1-Minute Intervals and 500 Events • Number of Inputs: 4 (3 Phases Referenced to Neutral) • Maximum Input Voltage: 1000 Vrms, CF 1.7 • Input Impedance: 10 MΩ • Bandwidth: 42.5 Hz to 3.5 kHz • Scaling: 1:1 and Variable • Measurement Category : 1000 V CAT III/600 V CAT IV • Dimensions: 9.1" x 7.1" x 2.1" The Fluke 1740 Series three-phase loggers give you fast and easy access to the data you need to make critical power quality and energy decisions in real-time. Designed specifically for technicians and engineers who need the flexibility to troubleshoot, quantify energy usage and analyze power distribution systems. The IFLEX probe is 24 in. by 60 cm and up to 1500A. An optimized user interface, flexible current probes, and intelligent measurement verification function that allows you to digitally verify and correct connections makes setup easier than ever and reduces measurement uncertainty. Minimize your time in potentially hazardous environments and reduce the hassle of suiting up in PPE by using a wireless connection (WiFi) to view data directly in the field.

INCLUDES: • (1) Flexible Current Probe • (1) USB Stick • (1) USB Cable • (1) 3PHVL-1730 3-Phase + Neutral Voltage Test Lead • (1) Test Lead Set Red/Black 0.18m • (1) Test Lead Set Red/Black 1.5m • (4) Alligator Clips • (1) 173x/174x Soft Case • (1) Cable Marker Kit • (1) MP1-3R/1B-Magnet Probe 1 Set (3 Red, 1 Black) FEATURES: • Measure all three voltage and current phases plus the neutral current • Comprehensive logging • Measure with premium accuracy • Capture dips, swells and interruptions • Measure key power quality parameters • Optimized user interface • Flexible power supply • Rugged and reliable • Two external USB ports • Ethernet connectivity • Compact size • Highest safety rating in the industry • Optimized measurement accessories • "In-workshop" or "in-the-field" setup and download through PC application software: simple download using USB memory stick, WiFi download, wired ethernet connection or via USB cable • Energy Analyze plus application software: download and analyze every measured detail of energy consumption and power quality state-of-health with automated reporting • One touch reporting: create standardized reports according to commonly used standards like EN 50160, IEEE 519, GOST 33073 or export data in PQDIF or NeQual compatible format for use with third party software • Advanced analysis: choose any available logged parameter to create a highly customized view of logged measurements for advanced correlation of data SPECIFICATIONS: • Voltage Range: 100 V to 500 V using safety plug input when powering from the measurement circuit • Power Consumption: Maximum 50 VA (Max. 15 VA When Powered Using MA-C8 Adapter) • Efficiency: ≥ 68.2% (In Accordance with Energy Efficiency Regulations) • Maximum No-Load Consumption: <0.3 W Only When Powered Using IEC 60320 Input • Mains Power Frequency: 50/60 Hz ± 15% • Battery: Li-Ion 3.7 V, 9.2 Wh, Customer-Replaceable • On-Battery Run Time: Typically 4 Hours • Charging Time: <6 Hours • Resolution: 16-bit Synchronous Sampling • Input Signal Frequency: 50/60 Hz • Data Storage: Internal Flash Memory (Not User Replaceable) • Memory Size: Typical 20 Logging Sessions of 4 Weeks with 1-Minute Intervals and 500 Events • Number of Inputs: 4 (3 Phases Referenced to Neutral) • Maximum Input Voltage: 1000 Vrms, CF 1.7 • Input Impedance: 10 MΩ • Bandwidth: 42.5 Hz to 3.5 kHz • Scaling: 1:1 and Variable • Measurement Category : 1000 V CAT III/600 V CAT IV • Dimensions: 9.1" x 7.1" x 2.1" The Fluke 1740 Series three-phase loggers give you fast and easy access to the data you need to make critical power quality and energy decisions in real-time. Designed specifically for technicians and engineers who need the flexibility to troubleshoot, quantify energy usage and analyze power distribution systems. The IFLEX probe is 24 in. by 60 cm and up to 3000A. An optimized user interface, flexible current probes, and intelligent measurement verification function that allows you to digitally verify and correct connections makes setup easier than ever and reduces measurement uncertainty. Minimize your time in potentially hazardous environments and reduce the hassle of suiting up in PPE by using a wireless connection (WiFi) to view data directly in the field.

INCLUDES: • (1) USB Stick • (1) USB Cable • (1) 3PHVL-1730 3-Phase + Neutral Voltage Test Lead • (1) Test Lead Set Red/Black 0.18m • (1) Test Lead Set Red/Black 1.5m • (4) Alligator Clips • (1) 173x/174x Soft Case • (1) Cable Marker Kit • (1) MP1-3R/1B-Magnet Probe 1 Set (3 Red, 1 Black) FEATURES: • Measure all three voltage and current phases plus the neutral current • Comprehensive logging • Measure with premium accuracy • Capture dips, swells and interruptions • Measure key power quality parameters • Optimized user interface • Flexible power supply • Rugged and reliable • Two external USB ports • Ethernet connectivity • Compact size • Highest safety rating in the industry • Optimized measurement accessories • "In-workshop" or "in-the-field" setup and download through PC application software: simple download using USB memory stick, WiFi download, wired ethernet connection or via USB cable • Energy Analyze plus application software: download and analyze every measured detail of energy consumption and power quality state-of-health with automated reporting • One touch reporting: create standardized reports according to commonly used standards like EN 50160, IEEE 519, GOST 33073 or export data in PQDIF or NeQual compatible format for use with third party software • Advanced analysis: choose any available logged parameter to create a highly customized view of logged measurements for advanced correlation of data SPECIFICATIONS: • Voltage Range: 100 V to 500 V using safety plug input when powering from the measurement circuit • Power Consumption: Maximum 50 VA (Max. 15 VA When Powered Using MA-C8 Adapter) • Efficiency: ≥68.2% (In Accordance with Energy Efficiency Regulations) • Maximum No-Load Consumption: <0.3 W Only When Powered Using IEC 60320 Input • Mains Power Frequency: 50/60 Hz ±15% • Battery: Li-Ion 3.7 V, 9.2 Wh, Customer-Replaceable • On-Battery Run Time: Typically 4 Hours • Charging Time: <6 Hours • Resolution: 16-bit Synchronous Sampling • Input Signal Frequency: 50/60 Hz • Data Storage: Internal Flash Memory (Not User Replaceable) • Memory Size: Typical 20 Logging Sessions of 4 Weeks with 1-Minute Intervals and 500 Events • Number of Inputs: 4 (3 Phases Referenced to Neutral) • Maximum Input Voltage: 1000 Vrms, CF 1.7 • Input Impedance: 10 MΩ • Bandwidth: 42.5 Hz to 3.5 kHz • Scaling: 1:1 and Variable • Measurement Category : 1000 V CAT III/600 V CAT IV • Dimensions: 9.1" x 7.1" x 2.1" The Fluke 1740 Series three-phase loggers give you fast and easy access to the data you need to make critical power quality and energy decisions in real-time. Designed specifically for technicians and engineers who need the flexibility to troubleshoot, quantify energy usage and analyze power distribution systems. This model does not include an IFLEX probe. An optimized user interface, flexible current probes, and intelligent measurement verification function that allows you to digitally verify and correct connections makes setup easier than ever and reduces measurement uncertainty. Minimize your time in potentially hazardous environments and reduce the hassle of suiting up in PPE by using a wireless connection (WiFi) to view data directly in the field.

INCLUDES: • (1) Strap • (1) Magnetic hanger FEATURES: • For use with the Fluke 1740 loggers SPECIFICATIONS: • Dimensions: 8" x 2" x 0.25" Fluke 1740 magnetic hanger kit includes strap and magnetic hanger.

INCLUDES: • (1) True-RMS AC/DC Digital Multimeter, 1000V FEATURES: • Manual and automatic ranging • Display hold and auto hold • Frequency and capacitance measurements SPECIFICATIONS: • Unit Weight (KG): 0.773 • Unit Height (CM): 8.9 • Unit Length (CM): 27.9 • Unit Width (CM): 16.5 The Fluke 175 True RMS Digital Multimeter delivers the baseline general purpose features required by professional technicians around the world. You can find problems fast with all the basic troubleshooting measurements such as frequency, capacitance, resistance, continuity, and diode. And Display Hold and Auto Hold will help you capture significant events.

INCLUDES: • (1) Hard Carrying Case for Model 1750 FEATURES: • For use with: Fluke 1750 three phase power recorder • Rugged • Water tight with rollers SPECIFICATIONS: • Unit Weight (KG): 11.28 • Unit Height (CM): 64.5 • Unit Length (CM): 49 • Unit Width (CM): 31.3 1750 Power Quality Recorder Carrying Case.

INCLUDES: • (1) Windows 10 Tablet Computer • (1) USB/Ethernet Adapter • (1) Computer Power Supply • (1) Soft Case • (1) Yellow Cable • (1) Power Adapter Set • (1) Power Cord • (1) Wire Clip Set • (1) Handle • (1) TLS430 Test Lead Set • (1) SD Card • (1) CD • (1) Reg Card • (1) Carry Strap • (1) 4X 3210-PR-TF,1000A FEATURES: • Quick and reliable configuration: ARCHOS 43 Internet Tablet provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations • Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software – no need to worry about missed information due to incorrect setups • Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time • Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance • Reporting has never been easier: Auto Report creates either standard reports or customized reports with the minimum effort or hassle. • Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections • No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct • Measure every parameter: Voltage and current on three phases, neutral, and ground • 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events • Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection. SD card includes automatic download to SD when no other connection is made to the instrument. SPECIFICATIONS: • Input channels Voltage: 4 channels, AC/DC. Current: 5 channels. • Voltage channels: Input resistance: 2 MΩ / Input capacitance: < 20 pF • Measurement Type: True rms calculated continuously: every cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards • Frequency Measurement Range: 42.5 Hz to 69 Hz • Power Factor Measurement Range: 0.000 to 1.000 • Connector: RJ-45 • Speed and Type: 10/100 Base-T, auto MDIX • Communications Protocol: TCP/IP over ethernet • Voltage Terminals: 1100 V rms • Enclosure Protection: IP30 (per EN 60529) Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction. Records power disturbances and continuously monitors power quality parameters, including voltage, current, power, harmonics, flicker, and more. New Fluke 1750 Windows 10 Tablet: New Window's 10 Tablet for Control, Setup, Data Download and Analysis with Fluke 1750 in the field now included. This new tablet runs the full version of Fluke Energy Analyzer for instrument setup in the field and downloading with basic analysis. Setup and download is made by connecting the 1750 to the tablet via a wired Ethernet connection. The tablet has a detachable keyboard with two USB ports. The supplied Ethernet adapter connects to the other USB ports and then to the instrument via a standard Ethernet cable. Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.

INCLUDES: • (1) Basic Power Quality Recorder • (1) Soft carrying case • (1) PDA wireless "front panel interface" and charger power plug adapters • (4) 400A current probes (3140R) • (5) Test leads and clips • (1) SD memory card • (1) Fluke Power View and Fluke Power Analyze software • (1) Power cord with international plug set • (1) Ethernet cable • (1) Colour localization set FEATURES: • Measure every parameter: voltage and current on three phases, neutral, and ground • Cross-channel and current triggering capture every measurement, on every channel, every time • Intuitive PC software: Easily analyze data and generate reports. Automated EN50160 reporting and compliance. • Plug and play: Set up in minutes with self identifying current probes and single-lead voltage connections • PDA wirelessly interfaces with the recorder, allowing quick setup and verification with waveform displays, meter screens, and phasor diagrams • No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct • 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events • Data is automatically stored on the internal flash memory that can store records for over a month without compression or overwriting • Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection • Voice, data, and picture annotations can be made via the PDA to flag important points in the data stream • Certified to meet the stringent safety standards for use in 600 V CAT IV and 1000 V CAT III environments SPECIFICATIONS: • Range: 1000 V RMS ± 10 % over range • Accuracy: AC: ±0.2% rdg. ±0.1% f.s., >50V RMS / DC: ±0.5% rdg. ±0.2% f.s., >50V RMS • Voltage Crest Factor: 3 or less • Current Range: Depends on current probe used • Current Crest Factor: 4 or less • Frequency Range: 42.5 to 69 Hz • Accuracy: ±10mHz (10 to 110 % of range) • Power Factor Range: 0.000 to 1.000 • Accuracy: ±1 digit from the calculation of each measured value (±3 digits for total) • Displacement PF Range: -1.000 (leading) to +1.000 (lagging) • Accuracy: ±0.5% rdg. ±2% f.s. ±1 dgt. • Harmonic Analysis: 1st to 50th order • Accuracy: 1st to 20th orders: ±0.5% rdg. ±0.2% f.s. / 21st to 50th orders: ±1% rdg. ±0.3%f.s. • Dimensions: 4.5" x 2.25" x 1.0" A powerful high-capacity and fast-sampling power quality recorder that captures all events and waveforms on all channels all the time. Stand-alone unit - order CTs separately. The Fluke 1750 Power Recorder automatically detects, scales, and powers current probes without needing batteries; once power is applied, the instrument automatically begins recording.

INCLUDES: • (1) 1750-ET Power Quality Recorder • (1) Windows 10 Tablet • (4) 400A current probes • (5) Test leads and clips • (1) SD memory card • (1) Fluke Power View and Fluke Power Analyze software • (1) Power cord with international plug set • (1) Ethernet cable • (1) Color localization set • (1) Printed Getting Started manual • (1) Product CD with software and user manual PDF • (1) CS 1750/1760 Rugged transit carrying case FEATURES: • Quick and reliable configuration: ARCHOS 43 Internet Tablet provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations • Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software – no need to worry about missed information due to incorrect setups • Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time • Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance • Reporting has never been easier: Auto Report creates either standard reports or customized reports with the minimum effort or hassle. • Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections • No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct • Measure every parameter: Voltage and current on three phases, neutral, and ground • 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events • Quickly retrieve data: With included SD memory card or via the 100BaseT high-speed Ethernet connection. SD card includes automatic download to SD when no other connection is made to the instrument. SPECIFICATIONS: • Conformance: IEC 61999-1-4 Class 1, IEC 61000-4-30 Class A or B depending on measurement function, IEEE519, IEEE1159, IEEE1459 and EN50160 • Internal Memory Capacity: At least 2GB • Maximum Recording Period: At least 31 days • Maximum Number of Events: Limited only by the size of the internal memory • Power Requirements: 100 to 240V RMS ±10%, 47-63Hz, 40W • Input Channels: Voltage - 4 channels, AC/DC. Current - 5 channels • Voltage Channels: Input resistance - 2MΩ. Input capacitance < 20pF. • Voltage Measurement Range: AC Voltage: 1000V RMS ±10% over range. DC Voltage: ±1000V +10% over range. • Voltage Crest Factor: 3 or less • Current Measurement Range: Depends on current probe used • Current Crest Factor: 4 or less A powerful high-capacity and fast-sampling power quality recorder that captures all events and waveforms on all channels all the time. Complete kit with all essential accessories. New Fluke 1750 Windows 10 Tablet: New Window's 10 Tablet for Control, Setup, Data Download and Analysis with Fluke 1750 in the field now included. This new tablet runs the full version of Fluke Energy Analyzer for instrument setup in the field and downloading with basic analysis. Setup and download is made by connecting the 1750 to the tablet via a wired Ethernet connection. The tablet has a detachable keyboard with two USB ports. The supplied Ethernet adapter connects to the other USB ports and then to the instrument via a standard Ethernet cable. Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.

INCLUDES: • (1) Soft Case • (1) Yellow Cable • (1) Power Adapter Set • (1) Power Cord • (1) Wire Clip Set • (1) Handle • (1) TLS430 Test Lead Set • (1) SD Card • (1) CD • (1) Carry Strap • (4) 3140R AC Clamps FEATURES: • Quick and reliable configuration: ARCHOS 43 Internet Tablet provides a window into what the instrument is recording, enabling quick and reliable configuration even in awkward test locations • Captures everything: Cross-channel and current triggering capture every measurement, on every channel, every time • Intuitive PC software: Easily analyze data and generate reports with automated EN50160 reporting and compliance • Reporting has never been easier: Auto Report creates either standard reports or customized reports with the minimum effort or hassle. • Plug and play: Set up in minutes with self-identifying current probes and single-lead voltage connections • No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct • Measure every parameter: Voltage and current on three phases, neutral, and ground • 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events SPECIFICATIONS: • Input channels: Voltage: 4 channels, AC/DC. Current: 5 channels. • Voltage channels: Input resistance: 2 MΩ / Input capacitance: < 20 pF • Measurement Type: True rms calculated continuously: every cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards • Frequency Measurement Range: 42.5 Hz to 69 Hz • Power Factor Measurement Range: 0.000 to 1.000 • Connector: RJ-45 • Speed and Type: 10/100 Base-T, auto MDIX • Communications Protocol: TCP/IP over ethernet • Voltage Terminals: 1100 V rms • Enclosure Protection: IP30 (per EN 60529) Quantify power quality throughout a facility, documenting results with professional reports. Records power disturbances and continuously monitors power quality parameters, including voltage, current, power, harmonics, flicker, and more. Setting up a power quality analyzer to capture detailed power quality data has never been easier that it is with the Fluke 1750. The only things you need to know are the system voltage, frequency and the power configuration (delta or wye). The analyzer then captures the most important data for up to 30 days without losing the most important details. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Once the data is captured download via Ethernet or directly to 2GB SD card (without the need of any other device). The Fluke 1750 features a wireless front panel for viewing measurements, data and setting up, implemented via a tablet computer using Bluetooth communication.

INCLUDES: • (1) Power Quality Recorder-Topas,W/O V Or I Probes,No Trans • (1) 2GB Internal Flash Memory Card • (1) PQ Analyze Software CD • (1) Ethernet Cable • (1) Crosslink Ethernet Cable1 - Crosslink Ethernet Cable • (1) Mains Cable • (1) Carrying Case/Bag FEATURES: • Fully Class-A compliant: conduct tests according to the stringent international IEC 61000-4-30 Class-A standard • GPS time synchronization: correlate data with events or datasets from other instruments with precision • Flexible and fully configurable thresholds and scale factors: allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances • 10 MHz, 6000 Vpk waveform capture: get a detailed picture of even the shortest event • 2 GB data memory: enables detailed, simultaneous recording of numerous power parameters for long periods of time • Comprehensive software included: provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode • Plug and play: allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries • Power quality statistics according to EN50160 SPECIFICATIONS: • Unit Weight (KG): 8.88 • Unit Height (CM): 42 • Unit Length (CM): 51 • Unit Width (CM): 41.8 The Fluke 1760 Three-Phase Power Quality Recorder is fully compliant to IEC 61000-4-30 Class-A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and low-voltage networks. The Fluke 1760 provides exceptional flexibility with the ability to customize thresholds, algorithms, and measurement selections. The 1760 power recorder captures the most comprehensive details on user-selected parameters; the supplied PQAnalyze application software enables users uses the in depth measurement and produce sophisticated analysis and reports.

INCLUDES: • (1) Power Quality Recorder W/Trans-Topas,Configured US/Can Range • (1) 2GB Internal Flash Memory Card • (1) PQ Analyze Software CD • (1) Ethernet Cable • (1) Crosslink Ethernet Cable • (1) Mains Cable • (1) Carrying Case/Bag • (4) Voltage Probes (600V for INTL Set, 1000V for US Set) • (4) Dual-Range Flexible Current Probes 1000A/200A AC • (1) GPS Time Sync Receiver FEATURES: • Fully Class-A compliant: conduct tests according to the stringent international IEC 61000-4-30 Class-A standard • GPS time synchronization: correlate data with events or datasets from other instruments with precision • Flexible and fully configurable thresholds and scale factors: allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances • 10 MHz, 6000 Vpk waveform capture: get a detailed picture of even the shortest event • 2 GB data memory: enables detailed, simultaneous recording of numerous power parameters for long periods of time • Comprehensive software included: provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode • Plug and play: allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries • Power quality statistics according to EN50160 SPECIFICATIONS: • Unit Weight (KG): 11.04 • Unit Height (CM): 42 • Unit Length (CM): 50.5 • Unit Width (CM): 41 The Fluke 1760 Three-Phase Power Quality Recorder is fully compliant to IEC 61000-4-30 Class-A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and low-voltage networks. The Fluke 1760 provides exceptional flexibility with the ability to customize thresholds, algorithms, and measurement selections. The 1760 power recorder captures the most comprehensive details on user-selected parameters; the supplied PQAnalyze application software enables users uses the in depth measurement and produce sophisticated analysis and reports.

INCLUDES: • (1) Power Quality Recorder - Topas,Configured Us/Can Range,No Trans • (1) 2GB Internal Flash Memory Card • (1) PQ Analyze Software CD • (1) Ethernet Cable • (1) Crosslink Ethernet Cable • (1) Mains Cable • (1) Carrying Case/Bag • (1) Voltage Probes (600V for INTL Set, 1000V for US Set) • (1) Dual-Range Flexible Current Probes 1000A/200A AC • (1) GPS Time Sync Receiver FEATURES: • Fully Class-A compliant: conduct tests according to the stringent international IEC 61000-4-30 Class-A standard • GPS time synchronization: correlate data with events or datasets from other instruments with precision • Flexible and fully configurable thresholds and scale factors: allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances • 10 MHz, 6000 Vpk waveform capture: get a detailed picture of even the shortest event • 2 GB data memory: enables detailed, simultaneous recording of numerous power parameters for long periods of time • Comprehensive software included: provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode • Plug and play: allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries • Rugged field design: insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions SPECIFICATIONS: • Unit Weight (KG): 10.63 • Unit Height (CM): 42 • Unit Length (CM): 51 • Unit Width (CM): 42 The Fluke 1760US Three-Phase Power Quality Recorder Topas with 1000V Sensor is the ideal portable instrument for power quality experts. It is fully compliant to IEC 61000-4-30 Class-A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and low-voltage networks, the 1760 provides the flexibility to customize thresholds, algorithms, and measurement selections. It captures the most comprehensive details on user-selected parameters and allows for later analysis and reporting.

INCLUDES: • (1) Power Quality Recorder W/Trans - Topas,W/O V Or I Probes FEATURES: • Fully Class-A compliant: conduct tests according to the stringent international IEC 61000-4-30 Class-A standard • GPS time synchronization: correlate data with events or datasets from other instruments with precision • Flexible and fully configurable thresholds and scale factors: allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances • 10 MHz, 6000 Vpk waveform capture: get a detailed picture of even the shortest event • 2 GB data memory: enables detailed, simultaneous recording of numerous power parameters for long periods of time • Comprehensive software included: provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode • Plug and play: allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries • Power quality statistics according to EN50160 SPECIFICATIONS: • Unit Weight (KG): 9.28 • Unit Height (CM): 39.5 • Unit Length (CM): 59.5 • Unit Width (CM): 39.8 The Fluke 1760 Three-Phase Power Quality Recorder is fully compliant to IEC 61000-4-30 Class-A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and low-voltage networks. The Fluke 1760 provides exceptional flexibility with the ability to customize thresholds, algorithms, and measurement selections. The 1760 power recorder captures the most comprehensive details on user-selected parameters; the supplied PQAnalyze application software enables users uses the in depth measurement and produce sophisticated analysis and reports.

INCLUDES: • (1) TRMS Multimeter W/Backlight FEATURES: • Manual and automatic ranging • Display hold and auto hold • Frequency and capacitance measurements • Min-max-average recording SPECIFICATIONS: • Unit Weight (KG): 0.773 • Unit Height (CM): 8.9 • Unit Length (CM): 27.9 • Unit Width (CM): 16.5 Fluke 177 True-RMS Digital Multimeter delivers the right features for electrical maintenance experts. With its precision, reliability, and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments, the Fluke 177 Includes all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

FLUKE 179 ESF Data Sheet INCLUDES: • (1) TRMS Multimeter W/Backlight & Temp FEATURES: • Manual and automatic ranging • Display hold and auto hold • Frequency and capacitance measurements • Temperature measurements • Minimum recording • Maximum recording • Average recording • Closed case calibration through front panel • Ergonomic case with integrated protective holster SPECIFICATIONS: • Unit Weight (KG): 0.773 • Unit Height (CM): 8.9 • Unit Length (CM): 27.9 • Unit Width (CM): 16.5 The Fluke 179 True-RMS DMM is the industry-standard troubleshooting tool for electrical and electronic systems. With its precision, reliability, and ease of use, the Fluke 179 is the preferred solution for professional technicians around the world. It includes the features you need to troubleshoot and repair electrical and electronic systems, plus a backlit digital display, analog bar graph, and built-in temperature measurements.

INCLUDES: • (10) Banana Plug With Safety Collar, Solderless FEATURES: • Designed to fit on the end of any 22 AWG to 18 AWG wire • Cross hole wire entry fits wires up to .12 in. (3 mm) diame • Available with tarnish resistant nickel or gold plating for very low contact resistance. • Fits standard panel and binding post banana jacks .161 in. to .166 in. (4.0 mm to 4.2 mm) diameter. SPECIFICATIONS: • Unit Weight (KG): 0.071 • Unit Height (CM): 1.3 • Unit Length (CM): 15.2 • Unit Width (CM): 10.2 Banana plug with safety collar, solderless, black.

INCLUDES: • (10) Banana Plug With Safety Collar, Solderless FEATURES: • Designed to fit on the end of any 22 AWG to 18 AWG wire • Cross hole wire entry fits wires up to .12 in. (3 mm) diameter • Available with tarnish resistant nickel or gold plating for very low contact resistance. • Fits standard panel and binding post banana jacks .161 in. to .166 in. (4.0 mm to 4.2 mm) diameter. SPECIFICATIONS: • Unit Weight (KG): 0.068 • Unit Height (CM): 1.3 • Unit Length (CM): 20.3 • Unit Width (CM): 10.2 Banana plug with safety collar, solderless, red.

INCLUDES: • (1) Scopemeter 2Ch 60Mhz Col Americas • (1) Battery Pack (BP290) • (1) Hang Strap • (1) Power Adapter (BC190/820) • (1) USB Interface Cable for PC Connection (USB-A to Mini-USB-B) • (2) 10:1 Voltage Probe, 300 MHz • (1) Black Hook Clip for Probe Tip • (1) Black Ground Lead with Mini Alligator Clip • (1) Black Ground Spring for Probe Tip • (1) Black Ground Spring for Probe Tip • (1) Black Insulation Sleeve • (1) Red and Black Test Lead Set with Test Pins • (1) User Manual and Safety Information FEATURES: • Two electrically isolated inputs • CAT III 1000 V / CAT IV 600 V safety rated • 60 MHz bandwidth model • Isolated USB ports for memory devices and PC connectivity • Dedicated 5000 count digital multimeter in 2-channel models • Quad meter measurements via scope BNC inputs in 4-channel models • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering • ScopeRecord roll mode, capture waveform sample data for up to 48 hours • TrendPlot, trend measurement readings for up to 22 days • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s) SPECIFICATIONS: • Unit Weight (KG): 4.2 • Unit Height (CM): 12 • Unit Length (CM): 43 • Unit Width (CM): 43 The Fluke 190 Series II extends the rugged power of ScopeMeter into new applications and new environments. With a 60 MHz bandwidth, up to 2.5 GS/s real time sample rate and up to 400 pico seconds resolution they're ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery powered instrument.

INCLUDES: • (2) VPS 410-x (one red, one blue) • (1) BC 190 Energy efficient Universal Power Supply 100-240V ±10% • (1) BP 290 Li-ion battery pack (2400mAh) • (1) Flukeview™ Software Full Version • (1) C290 Hard shell Case • (1) Hanging strap and hand strap • (1) Multi-language user manuals on CD-ROM • (1) USB interface cable FEATURES: • 2 independent floating isolated inputs for making differential measurements • Flexibility and convenience of an integrated 5000 count digital multimeter • 60MHz bandwidth and 625 MS/sec high-speed sampling • CAT III 1000 V/CAT IV 600 V safety rated for high voltage environments • Connect-and-View™ for intelligent, automatic triggering on fast, slow and even complex signals • ScopeRecord™ Roll mode captures low frequency signal anomalies over minutes, hours, or days • TrendPlot™ paperless recorder mode trends meter measurements over days and weeks to identify signal changes • Automatic capture and replay of last 100 screens • Isolated USB host port for memory devices and PC connectivity • Up to 7 hours of standard battery operation and easy-access battery door for quick battery swaps in the field SPECIFICATIONS: • Bandwidth: 60MHz • Real-time sample rate: 625MS/s • Inputs: 2 • Independently floating isolated inputs: Up to 1000V between inputs, references and ground • Timebase range: 5ns - 2 min/div • Input sensitivity: 2mV - 100V • Trigger types: Connect-and-View, Free Run, Single Shot, Edge, Delay, Video, Selectable pulse width and External. Dual slope trigger and Event trigger (n-cycle) Simplify electrical signal analysis and diagnose equipment failures in the field with the Fluke 190-062. The portable oscilloscope offers the same performance as a bench scope with feature–rich capabilities to tackle just about any troubleshooting task. Designed for plant maintenance engineers and technicians, the 190 ScopeMeter® Series goes into harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications. The Fluke 190-062 two-channel portable oscilloscope features a CAT III 1000V/CAT IV 600V safety rating and is IP-51 rated to withstand harsh environments. Get unprecedented ease-of-use with Connect-and-View™ triggering to capture and analyze waveforms hands free. With 60MHz bandwidth and real-time sampling rates up to 625 MS/sec, you can quickly and easily capture noise and other disturbances to quickly make sense of your signals and eliminate the tedium of troubleshooting.

INCLUDES: • (2) VPS 410-x (one red, one blue) • (1) BC 190 Energy efficient Universal Power Supply 100-240V ±10% • (1) BP 290 Li-ion battery pack (2400mAh) • (1) Flukeview™ Software limited demo version • (1) Hanging strap and hand strap • (1) Multi-language user manuals on CD-ROM • (1) USB interface cable FEATURES: • Color ScopeMeter, 100 MHz, 2 channels plus DMM/Ext.input • Two electrically isolated inputs • Fast sampling rate, up to 2.5GS/s with up to 400 ps resolution • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details • CAT III 1000V / CAT IV 600V safety rated • Dedicated 5000 Count digital multimeter in 2 Channel models • Quad meter measurements via scope BNC inputs in 4 channel models • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering • ScopeRecord roll mode, capture waveform sample data for up to 48 hours • TrendPlot, trend measurement readings for up to 22 days • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s) • IP-51 rated for dust and drip proof to withstand harsh environments • Isolated USB ports for memory devices and PC connectivity • Li-Ion battery for extended operating timespan • Easy-access battery door to make it easy to swap batteries • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington lock SPECIFICATIONS: • Type: Digital • Style: Hand-Held • Measures AC V: Yes • Measures DC V: Yes • Resolution AC Volts: 1 mV • Basic Accuracy V DC: 0.015 As the first four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the new Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness, and portability. You can choose from 100MHz or 200MHz bandwidth models, both with real-time sampling rates up to 2.5 GS/s and 400 ps resolution to capture noise and other disturbances. Both models feature deep memory?up to 10,000 samples per channel? so you can examine very small parts of the waveform in detail. And both are IP-51 rated to withstand dust, drips, humidity, and wide temperature variations.

INCLUDES: • (1) Fluke BC190 Power adapter • (1) Fluke BP290 Li-ion battery pack • (1) VPS410-R probe red • (1) VPS410-B probe blue • (1) USB cable A - B (mini) • (1) Hanging strap • (1) Handstrap affixed to instrument (user selectable for left or right handed use) • (1) CD user manual with FlukeView ScopeMeter software demo version • (1) Statement of calibration practice • (1) Fluke C290 hard shell carrying case • (1) Fluke SW90W, FlukeView for ScopeMeter for Windows with registration key code FEATURES: • IEC 61010 1000V CAT III / 600V CAT IV Safety rating • 2 fully isolated floating input channels with up to 1.25 GS/s real time sampling rate • 8ns Glitch detect • 10,000 sample deep memory per channel for displaying high resolution waveform details • 2 input channels provide: 2 meter measurements, 2 TrendPlot traces, 2 ScopeRecord traces, capturing or logging 2 inputs over time • Live Zoom with full resolution SPECIFICATIONS: • Bandwidth: 100MHz • Real-time sample rate: 1.25GS/s • Inputs: 2 • Independently floating isolated inputs: Up to 1000V between inputs, references and ground • Timebase range: 5ns - 2 min/div • Input sensitivity: 2mV - 100V The new Fluke 190-102/S Series II ScopeMeter is a 2-channel portable hand held oscilloscope built for CAT III & IV environments. It easily works with 3-phase applications for many industrial applications like motors and variable speed drives and includes all the key features of the original Fluke 190 series ScopeMeters, FlukeView software and case.

INCLUDES: • (1) Scopemeter 4 Channel 100 Mhz Color Americas • (1) Battery Pack (BP291) • (1) Hang Strap • (1) Power Adapter (BC190/820) • (1) USB Interface Cable for PC Connection (USB-A to Mini-USB-B) • (4) 10:1 Voltage Probe, 300 MHz • (1) Black Hook Clip for Probe Tip • (1) Black Ground Lead with Mini Alligator Clip • (1) Black Ground Spring for Probe Tip • (1) Black Insulation Sleeve • (1) Red and Black Test Lead Set with Test Pins • (1) User Manual FEATURES: • Two or four electrically isolated inputs • CAT III 1000 V / CAT IV 600 V safety rated • Choose from 60 MHz, 100 MHz, 200 MHz or 500 MHz bandwidth models • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details • Dedicated 5000 count digital multimeter in 2-channel models • Quad meter measurements via scope BNC inputs in 4-channel models • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering • ScopeRecord roll mode, capture waveform sample data for up to 48 hours • TrendPlot, trend measurement readings for up to 22 days • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s) SPECIFICATIONS: • Unit Weight (KG): 4.2 • Unit Height (CM): 12 • Unit Length (CM): 43 • Unit Width (CM): 43 As the first four-channel portable scope safety rated CAT III 1000 V / CAT IV 600 V, the Fluke ScopeMeter® 190-204 combines an unprecedented level of performance, ruggedness, and portability with 200 MHz bandwidth and real-time sampling rates up to 2.5 GS/s and 200 ps resolution to capture noise and other disturbances. This model feature deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter® test tools are hand-held battery operated, designed to meet the demands of field service professionals.