Products

FREE SHIPPING - Flotec FPSE9000 Stainless Steel/Thermoplastic Sewage Pump with Tethered Switch, 1/2 HP, 9000 Max GPH, 22-foot Max Lift, Handles Solids up to 2 Inches

FREE SHIPPING - Flotec FPZS50T Submersible Thermoplastic Sump Pump, 1/2 HP, 4200 Max GPH, 3/16" Solids Handling, Tethered Float Switch

Flotec FPZT7300 Zinc Sump Pump, 1/2 HP, 6000 Max GPH, 23-foot Max Lift, Handles Solids up to 3/8-inch

FREE SHIPPING - Flotec FPZT7550 Submersible Zinc High Output Sump Pump, 1 HP, Vertical Float Switch, 6600 Max GPH, 1-1/2" Discharge, 115V

Top Products Name Crankshaft Orientation Crankshaft Diameter Crankshaft Length Price: Low to High Price: High to Low Products On Sale On Top Newest On Top

Part Number: #85041 Mfg No.: H-1015-A Sloan Code Number: 3388015 Mfg: Sloan Valve Co All Sloan High-Effieciency Urinal valves now include a flow control component inserted into the tailpiece assembly. By having a flow control on the supply side of the valve, flush delivery is more consistent and less sensitive to incorrect control stop adjustment. This helps better match the flow rate from the flushometer to the flow rate of the HEU, while preventing splashes.

Fluke measurement tools are trusted by dozens of professions including electronic installers, maintenance and service technicians, quality control technicians, and more. Fluke tools help these professionals and industries, which stake their reputations on the precision of their tools, running smoothly and productively. Shop from clamp meters, electrical testers, megohmmeters, multimeter accessories, multimeters, pressure gauge, temperature testers, voltage ticks.

INCLUDES: • (1) Utility Multimeter • (1) Test Lead Set (TL75) • (1) 9V Battery • (1) Integrated Holster FEATURES: • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity • True-RMS for accurate AC measurements on non-linear loads • A large backlit display allows for easy visibility in low-lit areas SPECIFICATIONS: • Unit Weight (KG): 0.8 • Unit Height (CM): 2.75 • Unit Length (CM): 1.6 • Unit Width (CM): 0.9 True-RMS Digital Multimeter designed for basic electrical tests.

INCLUDES: • (1) Test Lead Set (TL75) • (1) 9V Battery • (1) Integrated Holster FEATURES: • AutoVolt automatic AC/DC voltage selection • Record signal fluctuations using Min/Max/Average • Resistance and continuity • CAT III 600 V safety rated SPECIFICATIONS: • Unit Weight (KG): 0.76 • Unit Height (CM): 9.5 • Unit Length (CM): 27.5 • Unit Width (CM): 16 Designed for easy one-handed operation, the compact Fluke 114 True RMS digital multimeter is the perfect troubleshooting tool for go/no go testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. And you can use the LoZ function to identify so-called ghost voltage and prevent false readings.

INCLUDES: • (1) Test Lead Set (TL75) • (2) 9V Battery • (2) Integrated Holster FEATURES: • Large white LED backlight to work in poorly lit areas • Resistance and continuity • Frequency and capacitance • 10 A AC/DC current measurement (20 A overload for 30-seconds maximum) • Min/Max And Average Recording With Display Hold • Continuity Capture™ Records Opens/Shorts • Diode Test • Sleep Mode Preserves Battery Life • Test Lead Set And Holster With Stand Included • CAT III-600V SPECIFICATIONS: • Unit Weight (KG): 0.78 • Unit Height (CM): 10 • Unit Length (CM): 27.5 • Unit Width (CM): 16 The Fluke 115 is the compact, general purpose troubleshooting tool for field service technicians. For general purpose electrical and electronic test requirements, the Fluke 115 True RMS digital multimeter provides the perfect answer. Its simple, one-handed operation and compact design meets the needs of a wide variety of field service technicians. It measures True RMS voltage and current with 6000 count resolution as well as resistance, continuity, frequency and capacitance for quick verifications.

INCLUDES: • (1) Test Lead Set (TL75) • (1) Integrated Temperature Probe (80BK) • (1) 9V Battery • (1) Integrated Holster FEATURES: • Built in Thermometer for HVAC applications • Microamp to test flame sensors • Low input impedance helps prevent false readings due to ghost voltage • Resistance, continuity, frequency and capacitance • MIN/MAX/AVERAGE with elapsed time to record signal fluctuations • CAT III 600 V safety rated SPECIFICATIONS: • Unit Weight (KG): 0.607 • • • The Fluke 116 was specifically designed for HVAC professionals. It has everything you need to quickly troubleshoot problems with HVAC equipment and flame sensors, including a built-in thermometer to measure temperatures up to 400°C (752°F) and microamps to test flame sensors. The Fluke 116 also measures resistance, continuity, frequency, and capacitance. And the large white LED backlight makes it easy to see results even in poorly lit areas.

INCLUDES: • (1) Fluke 116 HVAC Multimeter • (1) Fluke 323 True-RMS Clamp Meter • (1) TL175 Hard Point Test Lead Set • (1) TPak ToolPak Magnetic Meter Hanging Strap • (1) Flexible Cuff Pipe Clamp Thermocouple • (1) 80BK Integrated Temperature Probe • (1) 80AK-A Thermocouple Adapter • (1) C115 Deluxe Soft Carrying Case with Shoulder Strap FEATURES: • Built-in thermometer for HVAC applications • Microamps to test flame sensors • Low input impedance: helps prevent false readings due to ghost voltage • Large white LED backlight to work in poorly lit areas • Resistance, continuity, frequency and capacitance • Min/Max/Average with elapsed time to record signal fluctuations • Compact ergonomic design for one-handed operation • Compatible with optional magnetic hanger (ToolPak™) • CAT III 600 V safety rated SPECIFICATIONS: • Maximum voltage between any terminal and earth ground: 600 V • Surge protection: 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2 • Display: 6,000 counts, updates 4 per second • Bar graph: 33 segments, updates 32 per second • Operating temperature: -10°C to +50°C • Storage temperature: -40°C to +60°C • Battery type: 9 volt Alkaline, NEDA 1604A/ IEC 6LR61 • Battery life: 400 hours typical, without backlight • Size: 167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in) • Weight: 550 g • Warranty: 3 years Having the right tool for the job is essential. Having all the right tools when you need them is even better. The Fluke 116/323 HVAC Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter. The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe; no need to carry a separate thermometer. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations. Fluke 116 multimeters are independently tested for safe use in CAT III 600 V environments. True RMS measurements and optimized ergonomics make the Fluke 323 True RMS Clamp Meter the best general purpose clamp meter for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments. Together, the Fluke 116 HVAC Multimeter and 323 True RMS Clamp Meter give electricians the right tools for the job.

INCLUDES: • (1) True-RMS AC/DC Electrician's Multimeter with Non-Contact Voltage Detection (117) • (1) Compact Portable Safety Proving Unit (PRV240) • (1) Test Lead Set (TL75) • (4) AA Batteries • (1) 9V Battery FEATURES: • PRV240 Proving Unit Kit with 117 DMM • Using the PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment • Sources both ac and dc steady-state voltage-supplies 240 V dc/ac • A single LED indicates functionality, making this unit a simple to use solution for complying with TBT verification of your test tool • Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers • Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact • Includes TPAK magnetic hanging strap • Long battery life - 5,000 tests per set of four AA batteries • Reduces the risk of shock and arc flash risk hazard • 5,000 tests per set of four AA batteries • One-year Warranty SPECIFICATIONS: • Fluke 117 - VoltAlert™ technology for non-contact voltage detection • Fluke 117 - AutoVolt automatic ac/dc voltage selection • Fluke 117 - LoZ helps prevent false readings due to ghost voltage • Fluke 117 - Large white LED backlight to work in poorly lit areas • Fluke 117 - True-RMS for accurate measurements on non-linear loads • Fluke 117 - Resistance, continuity, frequency and capacitance • Fluke 117 - Minimum/maximum/average to record signal fluctuations • Fluke PRV240 - Sources both AC and DC steady-state voltage of 240VDC/AC • Fluke PRV240 - Includes TPAK magnetic hanging strap • Fluke PRV240 - Long battery life of 5000 tests per set of four AA batteries The FLUKE 117/PRV240 is an Electrical Test Kit. The Fluke PRV240 proving unit is a portable, pocket-sized, battery-powered voltage source. It is unique in that it sources stable AC and DC voltages for both LoZ and HiZ instruments. The Fluke PRV240 provides a safe method to verify that your electrical test tool is operating properly before you conduct any live tests. The concept of Test Before Touch (TBT) involves testing your meter against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement. The Fluke 117 compact true-RMS meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

INCLUDES: • (1) Rechargeable Li-ion Battery Pack • (1) Switch Mode Power Supply, Adapter/Battery Charger • (1) Shielded Test Leads with Black Ground Leads • (1) Black Test Lead (for Grounding) • (1) Set of Red and Black Hook Clips • (1) Black Banana-to-BNC Adapter • (1) USB Angled Adapter • (1) WiFi USB Adapter FEATURES: • Full function dual input scope and meter • Oscilloscope bandwidth: 20 MHz • Meter and scope recorder • Two 5,000-count true-rms digital multimeters • Connect-and-View trigger simplicity for hands-off operation • IntellaSet technology automatically and intelligently adjusts numerical readouts • Dual-input waveform and meter reading recorder for trending data over extended periods • Recorder Event Detect captures elusive intermittent signals • WiFi adapter connects to internal USB port to wirelessly transfer information to PC, laptop or Fluke Connect mobile app SPECIFICATIONS: • Tester Type: Hand-Held Oscilloscope • Bandwidth: 20MHz • Max Real Time Sample Rate: 1μs to 5 s/div • Scope Measurements: Voltage • True RMS MM: Two 5000-count • Batteries: Lithium Ion, Rechargeable Battery Pack • Accessories: Includes shielded and grounding test leads The Fluke 123BNA 20 MHz, 2-Channel, 40 MS/s Industrial ScopeMeter Hand-Held Oscilloscope with Fluke Connect Compatibility is the rugged oscilloscope solution for industrial electrical and electro-mechanical equipment troubleshooting and maintenance applications. It is a truly integrated test tool with oscilloscope, multimeter and high-speed recorder in one, easy-to-use instrument. The 123B/NA also integrates with Fluke Connect mobile app to enable further collaboration, data analysis and archiving of critical test information. The Fluke 123B/NA includes innovative functions designed to help technicians troubleshoot faster and get the answers they need to keep their systems up and running. Display waveforms with Connect and View trigger and setup technology and automatically view related numerical measurements using Fluke IntellaSet technology, all without making manual measurement adjustments. With Recorder Event Detect capabilities, elusive intermittent events are captured and logged for easy viewing and analysis.

INCLUDES: • (1) Industrial ScopeMeter® Hand Held Oscilloscope • (2) Shielded test leads with ground leads • (1) Black test lead • (1) Red and blue hook clips • (1) Banana to BNC adapter • (1) Charger/Power adapter • (1) WiFi USB adapter • (1) FlukeView™ for Windows® software • (1) Magnetic hanger • (1) Screen protector • (1) Soft carrying case • (1) Li-Ion battery pack FEATURES: • Dual-input digital oscilloscope and multimeter • Increased resolution and work load coverage with 40 MHz oscilloscope bandwidth • Two 5,000-count true-rms digital multimeters • Connect-and-View™ trigger simplicity for hands-off operation; IntellaSet™ technology automatically and intelligently adjusts numerical readout • Dual-input waveform and meter reading recorder for trending data over extended periods • Recorder Event Detect captures elusive intermittent signals • WiFi adapter connected to internal USB port to wirelessly transfer information to the PC, laptop or Fluke Connect® mobile app* • FlukeView® ScopeMeter® Software for Windows® • Check Industrial networks with BusHealth physical layer tests against defined reference levels • Single Phase Power Quality and Harmonics Analzyer SPECIFICATIONS: • DC Voltage Ranges: 500 mV, 5 V, 50 V, 500 V, 750 V • Accuracy: ± (0.5 % +5 counts) • True-rms Voltages (V ac and V ac+dc) Ranges: 500 mV, 5 V, 50 V, 500 V, 750 V • Accuracy for 5 % to 100 % of range (AC or dc coupled): 60 Hz to 20 kHz | ± (2.5 % +15 counts) This industrial ScopeMeter® is the rugged oscilloscope and recorder solution for industrial electrical and electro-mechanical equipment.

Fluke 1503 Data Sheet INCLUDES: • (1) Remote Probe • (1) Silicone Test Lead Set • (1) Test Probe Set • (1) Large Alligator Clip Set • (1) Holster • (1) User Manual FEATURES: • Insulation test range: 0.1 MΩ to 2000 MΩ • Insulation test voltages: 500 V, 1000 V • Repetitive or hard-to-reach testing is easy with the remote test probe • Auto-discharge of capacitive voltage for added user protection • Save Battery power with Auto Power Off • Read measurements easily with large, backlit display • CAT IV 600 V overvoltage category rating for added user protection SPECIFICATIONS: • Unit Weight (KG): 1.38 • Unit Height (CM): 7.5 • Unit Length (CM): 29.9 • Unit Width (CM): 15 • AC/DC voltage: 0.1 V to 600 V • Resistance: 0.01 Ω to 20.00 kΩ The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.

Fluke 1507 Data Sheet INCLUDES: • (1) Insulation Tester • (1) Remote Probe • (1)Test Leads • (1)Test Probes • (1) Alligator Clips, • (1) User Documentation FEATURES: • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio (only available on the 1507) • Make repetitive tests simple and easy with the 1507's compare (Pass/fail) function (only available on the 1507) • Repetitive or hard-to-reach testing is easy with the remote test probe SPECIFICATIONS: • Unit Weight (KG): 1.38 • Unit Height (CM): 7.8 • Unit Length (CM): 29.9 • Unit Width (CM): 15.2 The Fluke 1507 is a versatile, compact, handheld insulation tester for advanced industrial and electrical insulation testing. Its multiple test voltages make it the ideal tool for many troubleshooting, commissioning, and preventative maintenance applications.

INCLUDES: • (1) 5KV Insulation Tester • (1) Test Cable with Alligator Clips Set (Red/Black/Green) • (1) Infrared Adapter with Interface Cable • (1) FlukeView Forms Basic Software • (1) AC Power Cord • (1) Registration Card • (1) Soft Carrying Case • (1) Software License Agreement • (1) USB-IR Cable Installation Guide • (1) FlukeView Forms Installation Guide • (1) Quick Reference Card • (1) User Manual CD • (1) User Manual FEATURES: • Test voltages up to 10 kV provides solutions for all applications • CAT III 1000 V, CAT IV 600 V safety rating • Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety SPECIFICATIONS: • Unit Weight (KG): 7.22 • Unit Height (CM): 21.7 • Unit Length (CM): 49 • Unit Width (CM): 37 • Charger Input (AC): 85 V to 250 V AC 50/60 Hz 20 VA The Fluke 1550C performs digital insulation testing up to 5 kV, and makes data collection easy through the Fluke Connect™ wireless app. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, simply using drag-and-drop – something you won't find anywhere else. It's the perfect tool for preventive or predictive maintenance programs designed to identify potential equipment failures before they occur. And it comes with a three-year warranty and CAT IV 600 V safety rating.

Fluke 1550C Kit Data Sheet INCLUDES: • (1) Set of Test cables with alligator clips (red, black, green) • (1) Infrared adapter with interface cable • (1) FlukeView® Forms Basic CD-ROM • (1) AC power cord • (1) IP67 Hard Case • (1) Certificate of Calibration • (1) English manual • (1) User's manual on CD-ROM • (1) Quick reference card • (1) Software license agreement • (1) Registration card • (1) FlukeView® Forms installation guide • (1) USB-IR cable installation guide • (1) Heavy duty alligator clip leads FEATURES: • Quickly configure, start and stop tests on the 1550C remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone • Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values • Drag and drop report creation using Fluke Connect desktop saves time and makes test results easier to understand • Fluke Connect saves test results to the cloud for analysis and preventive maintenance SPECIFICATIONS: • Display: 75 x 105 mm • Power: 12 V lead-acid rechargeable battery, Yuasa NP2.8-12 • Charger Input (AC): 85 V to 250 V AC 50/60 Hz 20 VA • This Class II (double insulated) instrument is supplied with a Class 1 (grounded) power cord. The protective earth terminal (ground pin) is not connected internally. The extra pin is for added plug retention only. • Dimensions: 269 x 277 x 160 mm (10.6 x 10.9 x 6.3 in) • Weight: 3.7 kg (8.2 lb) • Temperature (operating): -20°C to 50°C (-4°F to 122°F) • Temperature (storage): -20°C to 65°C (-4°F to 149°F) • Humidity: 80% to 31°C decreasing linearly to 50% at 50°C • Altitude: 2000 m • Enclosure sealing: IP40 • Input overload protection: 1000 V AC • Electromagnetic compatibility: EN 61326 • Safety compliance: IEC 61010-1: Overvoltage category II, Pollution Degree 2. IEC 61010-2-030: IEC 61557-1, IEC 61557-2 The Fluke 1550C performs digital insulation testing up to 5 kV, and makes data collection easy through the Fluke Connect™ wireless app. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, simply using drag-and-drop – something you won’t find anywhere else. It’s the perfect tool for preventive or predictive maintenance programs designed to identify potential equipment failures before they occur. And it comes with a three-year warranty and CAT IV 600 V safety rating.

INCLUDES: • (1) Insulation Resistance Tester • (1) Set Test Cables with Alligator Clips • (1) Infrared adapter with interface cable • (1) FlukeView® Forms Basic CD-ROM • (1) AC Power Cord • (1) English Manual • (1) Users Manual on CD-ROM • (1) Quick Reference Card • (1) Software License Agreement • (1) Registration Card • (1) FlukeView® Forms Installation Guide • (1) USB-IR Cable Installation Guide • (1) Soft Carrying Case FEATURES: • Test voltages to up 10 kV and save time by trending on the spot only with Fluke Connect™ • CAT III 1000 V, CAT IV 600 V safety rating • Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety • Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V • Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall • Long battery life gives the user over 750 tests between charges • Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup • Guard system eliminates the effect of surface leakage current on high-resistance measurements • Large digital/analog LCD for easy viewing • Capacitance and leakage current measurement • Ramp function for breakdown testing • Resistance measurements up to 2 TΩ • Timer settings up to 99 minutes for timed tests • 3-year warranty SPECIFICATIONS: • Bar Graph Range: 0 to 1 TΩ • Insulation Test Voltage Accuracy: -0 %, +10 % at 1 mA load current • Induced AC Mains Current Rejection: 2 mA maximum • Charging Rate for Capacitive Load: 5 seconds per °F • Discharge Rate for Capacitive Load: 1.5 s/°F Evaluate the trends and eliminate the doubt with this insulation resistance tester. Ideal for testing a wide range of high voltage equipment including switchgear, motors, generators and cables, the CAT III 1000 V/CAT IV 600 V safety-rated tester can conduct digital insulation testing up to 10 kV. By adding this to your preventive or predictive maintenance programs, it can help to identify potential equipment failures before they occur.

INCLUDES: • (1) Test cables with alligator clips (red, black, green) • (1) Infrared adapter with interface cable • (1) AC power cord • (1) Soft carrying case • (1) Quick reference card • (1) USB-IR cable installation guide FEATURES: • Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone • Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values • Drag and drop report creation using Fluke Connect desktop saves time and makes test results easier to understand • Fluke Connect saves test results to the cloud for analysis and preventive maintenance • Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup • Guard system eliminates the effect of surface leakage current on high-resistance measurements • Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V • CAT III 1000 V, CAT IV 600 V safety rating • Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety • Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall • Long battery life gives the user over 750 tests between charges • Large digital/analog LCD for easy viewing • Capacitance and leakage current measurement • Ramp function for breakdown testing • Resistance measurements up to 2 TΩ • Timer settings up to 99 minutes for timed tests • 3-year warranty SPECIFICATIONS: • Display: 75 x 105 mm • Power: 12 V lead-acid rechargeable battery, Yuasa NP2.8-12 • Charger Input (AC): 85 V to 250 V AC 50/60 Hz 20 VA • Dimensions: 10.6" x 10.9" x 6.3" • Temperature (operating): -20°C to 50°C (-4°F to 122°F) • Temperature (storage): -20°C to 65°C (-4°F to 149°F) • Humidity: 80% to 31°C decreasing linearly to 50% at 50°C • Altitude: 2000 m • Enclosure sealing: IP40 • Enclosure sealing: IP40 • Input overload protection: 1000 V AC • Electromagnetic compatibility: EN 61326 • Safety compliance: IEC 61010-1: Overvoltage category II, Pollution Degree 2. IEC 61010-2-030: Measurement 600V CAT IV / 1000V CAT III IEC 61557-1, IEC 61557-2 The Fluke 1555 insulation resistance tester offers digital insulation testing up to 10 kV, making it ideal for testing high voltage equipment including switchgear, motors, generators and cables. Data collection is easy using the Fluke Connect™ wireless app. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, simply using drag-and-drop – something you won’t find anywhere else. The 1555 insulation tester can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.

INCLUDES: • (1) Test Cables with Alligator Clips (red, black, green) • (1) Infrared adapter with interface cable • (1) AC Power Cord • (1) Quick Reference Card • (1) USB-IR Cable Installation Guide • (1) IP67 Hard Case • (1) Certificate of Calibration • (1) Heavy Duty Alligator Clip Leads FEATURES: • Quickly configure, start and stop tests on the 1555 remotely, a safe distance away from any operating, energized equipment, using Fluke Connect® and a smart phone • Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values • Drag and drop report creation using Fluke Connect desktop saves time and makes test results easier to understand • Fluke Connect saves test results to the cloud for analysis and preventive maintenance • Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup • Guard system eliminates the effect of surface leakage current on high-resistance measurements • Selectable test voltages in 50 V steps from 250 V to 1000 V, and 100 V steps above 1000 V • CAT III 1000 V, CAT IV 600 V safety rating • Warning function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC for increased user safety • Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall • Long battery life gives the user over 750 tests between charges • Large digital/analog LCD for easy viewing • Capacitance and leakage current measurement • Ramp function for breakdown testing • Resistance measurements up to 2 TΩ • Timer settings up to 99 minutes for timed tests • 3-year warranty SPECIFICATIONS: • The tester's accuracy is specified for one year after calibration at operating temperatures of 0°C to 35°C. For operating temperatures outside the range (-20°C to 0°C and 35°C to 50°C), add ±.25% per °C, except on the 20% bands add ±1% per °C. • Display: 75 x 105 mm • Power: 12 V lead-acid rechargeable battery, Yuasa NP2.8-12 • Charger Input (AC): 85 V to 250 V AC 50/60 Hz 20 VA • Dimensions: 10.6" x 10.9" x 6.3" • Temperature (operating): -20°C to 50°C (-4°F to 122°F) • Temperature (storage): -20°C to 65°C (-4°F to 149°F) • Humidity: 80% to 31°C decreasing linearly to 50% at 50°C • Altitude: 2000 m • Enclosure sealing: IP40 • Input overload protection: 1000 V AC • Electromagnetic compatibility: EN 61326 • Safety compliance: IEC 61010-1: Overvoltage category II, Pollution Degree 2. IEC 61010-2-030: Measurement 600V CAT IV / 1000V CAT III IEC 61557-1, IEC 61557-2 The Fluke 1555 insulation resistance tester kit offers digital insulation testing up to 10 kV in an industrial strength case, with all the heavy duty leads and clips you need. Plus, the Fluke Connect wireless app performs tests and collects data while you stay a safe distance away. Remote operation lets you spend as little time as possible in potentially hazardous zones. Real-time trending shows a live graph on your phone, rather than a hard-to-read set of changing values. And you can create reports quickly, simply using drag-and-drop – something you won’t find anywhere else. Fluke insulation testers can now conduct the entire range of test voltages specified in IEEE 43-2000 with a best in class, 3 year warranty and CAT IV 600 V safety rating.