Products

INCLUDES: • TIC 410A Hot Stick Attachment FEATURES: • Attaches to the TIC-300 PRO TIC Tracer AC voltage detector to extend your reach for checking transmission lines, power distribution equipment, down power lines, fuses, and load break connectors • Also compatible with the AT-7000 Series and AT-6000 Series Advanced Wire Tracers SPECIFICATIONS: • Expands to 57" long • Extends voltage detection level from 1500 V AC to 122,000 V AC (122 kV) The TIC 410A Hot Stick Attachment physically and electrically extends the reach of the TIC 300 Pro high voltage detector for checking transmission lines, power distribution equipment, down power lines, fuses, and load break connectors. The TIC 410A universal adapter extends the voltage limit on the TIC 300 Pro from 1500 AC to 122,000 VAC (122 kV) and adjusts from 33" to 57". Just screw it onto the universal adapter on the TIC 300 Pro high voltage probe - no other tools are required. EXTENDED REACH FOR A VARIETY OF JOBS: For use in utility, industrial, and mining applications when working with high-voltage equipment such as transmission lines, downed power lines, fuses, and load-break connectors. BUILT RUGGED AND RELIABLE: Constructed with engineered fiberglass fabrics - the finest available for insulated tool construction. ACCESS TO HARD-TO-REACH AREAS: The Amprobe TIC 410A Hot Stick Attachment is 33 inches long when collapsed and extends to 57 inches in length. EASY TO USE: Large, glove-friendly push button to collapse unit, heavy duty rubber base, all metal attachment tip with metal screw and made in the USA.

INCLUDES: • THWD-5 Relative Humidity and Temperature Meter with Wet Bulb and Dew Point • Deluxe Hard Carrying Case • Batteries • Users Manual FEATURES: • Four measurements in one meter • Relative Humidity, Temperature, Dew Point and Wet Bulb • Extended probe for easy target access • Large digital dual display with backlight • Temperature in °C or °F, front panel selectable • Measure both relative humidity and temperature together • 0.1 degree resolution for temperature • Minimum and Maximum measurements stored • Data Hold to freeze last measurement reading • Tripod mountable SPECIFICATIONS: • Relative humidity: 0 % ? 100 % • Temperature: 14 °F ? 140 °F (-10 °C ? 60 °C) • Dew point temp: -100.0 °F ? 139.8 °F (-73.4 °C ? 59.9 °C) • Wet bulb temp: 7.88 °F ? 139.8 °F (-13.4 °C ? 59.9 °C) • Response time: 60 seconds • Resolution: 0.1°C / 0.1°F The Amprobe THWD-5 relative humidity (RH) and temperature microprocessor-based psychrometer is designed for HVAC and plant maintenance engineers and technicians. It can simultaneously measure relative humidity, dew point, and wet-and dry-bulb temperature to provide dual-scale readings in ?F and ?C, and is used for HVAC, indoor air quality, and environmental applications. The capacitive humidity sensor measures RH from 0 to 100 percent. The flexible probe can be extended to reach inside ducts and other hard to reach areas for easy target access, and a tripod mount stabilizes the meter for readings that take more time. The meter has minimum, maximum, and hold functions for recording data, a helpful function for preventive maintenance. It is powered by four 1.5V AAA batteries (included), and includes a carrying bag, and instructions. MICROPROCESSOR-BASED PSYCHROMETER: The THWD-5 psychrometer is a microprocessor-based psychrometer designed for HVAC and Plant Maintenance engineers and technicians. MEASURES WET BULB AND DEW POINT: Easy and quick access to Wet bulb and Dew point values as well as Relative Humidity and Temperature. The THWD-5 is equipped with an extended probe for easy target access, a large dual LCD display, and is tripod mountable. EASY-TO-USE INTERFACE: The Amprobe THWD-5 relative humidity, temperature Meter with dew point, wet bulb and flexible probe features a large digital dual display with a backlight built in.

INCLUDES: • GSD600 Leak Detector • (4) 1.5 V AA Alkaline Batteries (installed) • Carrying Case • User Manual FEATURES: • Detects methane and propane gas • Quickly identifies and pinpoints gas leaks • Automatic calibration feature • 5 level LED alarm: >40, >80, >160, >320, and >640 ppm • Built-in earphone jack with mute function (earphone not included) • Flexible probe to access difficult measurement areas • Auto power off SPECIFICATIONS: • Methane: 40 ppm ? 640 ppm • Propane: 35 ppm ? 580 ppm • Sensitivity: 35 ppm (propane) When working with combustible gases, safety is top priority. The Amprobe GSD600 Gas Leak Detector senses leaking methane and propane gas from closed piping systems reliably and quickly. Use it in home, industrial, and HVAC maintenance applications. The GSD600 indicates the concentration level of the combustible gas in PPMs (parts per million), which is important for safety concerns. When gas exceeds certain PPM levels, the environment is toxic and explosive. The area should not be entered until properly ventilated. FLEXIBLE PROBE: The GSD600 Gas Leak Detector offers a flexible probe to test hard-to-reach areas. AUDIBLE AND VISUAL GAS PRESENCE INDICATORS: When gas is detected, the GSD600 emits a frequency tone. The frequency of the beep coincides with the concentration of the gas. LEDs also display the level of gas present in an area or room. Use the mute function in quiet work areas and utilize the LED displays, or use earphones for hearing the meter in loud environments. EARPHONE JACK: The GSD600 features a built-in earphone jack with mute function (earphone not included).

INCLUDES: • (1) Set Test leads with threaded alligator clips • (1) 9 V battery (installed) • (1) Magne-Grip™ Holster with magnetic hanging strap • (1) temperature adapter • (1) Type K thermocouple probe • (1) Spare fuse • (1) User manual FEATURES: • Frequency to 40 MHz, temperature to 1832 °F, capacitance to 4000 °F • Input warning tone when test leads are in wrong jack • 1000 V/750 V DC/AC • 10 A AC/DC, fully safety fused • Resistance to 4 MO • Continuity beeper • MIN/MAX, Relative, Peak and Data Hold • Auto Power Off to save battery life • Separate door for easy battery and fuse access • Magne-Grip™ Holster with magnetic hanging strap SPECIFICATIONS: • Manufacturer Warranty: 1 year • Packaging Type: Package • Packaging Material: Plastic • Unit Weight (KG): 0.76 • Unit Height (CM): 8 • Unit Length (CM): 30.5 • Unit Width (CM): 21 Manual ranging digital multimeter with temperature and capacitance for field service technicians.

INCLUDES: • (1) Underground wire Tracer • (1) R-3500 Receiver • (1) T-3500 Transmitter • (2) Measurement Cables • (2) Alligator Clips • (1) Grounding Rod • (10) Battery IEC R6/AA Cell /Migon • (6) IEC R20/ D Cell/ Mono • (1) Nylon Bag FEATURES: • Locates underground energized and de-energized wires, cables and pipes • Three testing modes for best accuracy: – passive power (50 / 60 Hz); – passive radio (RF); – active T-3500 signal generator with induction mode dIRectly connected to the cable with test leads or optional clamp • Active mode depth measurement up to 16 Ft. (4.9 m) • 33 kHz active frequency – best frequency for general locating • Precise pinpointing of buried services and exceptionally fast sound and meter response with backlight multiple multiple-segment • Complete instrument, ready for use with receiver, transmitter, connection cable, ground stake and ground cable SPECIFICATIONS: • Unit Weight (KG): 9.84 • Unit Height (CM): 36.7 • Unit Length (CM): 79.5 • Unit Width (CM): 34 Keep productivity high and operational costs low with the Amprobe AT-3500. It's the rugged, economical solution for locating underground energized and de-energized wires, cables and pipes. Great for parking lot and airport lighting applications, it precisely pinpoints buried services with exceptionally fast sound and meter response. Take depth measurements with the press of a button. The backlight multiple-segment bar-graph digital display plus audible indicators show and tell readings. The AT-3500 employs the proven 33 kHz frequency for most locating applications. To avoid lines at utility construction sites, it also offers the highly sensitivepower and radio modes.

SKU: Amprobe 3435073 UPC: 095969492843 Weight: 2.73373205 lbs Amprobe 3435073 SC-3500 4" Signal Clamp Accessory for AT-3500 Underground Cable/Pipe Locator System

INCLUDES: • TIC 300 PRO • CC-300 Carrying Case • 9 V Battery (installed) • User Manual FEATURES: • Verifies presence of voltage from 30 VAC to 122,000 VAC (122 kV) without contacting the conductor • Simple two level electricity tester provides: High voltage (1,500 V to 122 kV AC) setting to check transmission lines, power distribution equipment, down power lines and load break connectors. Low voltage (30 to 1,500 V AC) setting to check for voltage in breaker panels, breakers, power outlets, fuses and wiring • VolTect™ alert warns that voltage is present with bright flashing lights and loud beeps • Push button self-test verifies that tester is working properly • Ergonomic design includes a convenient handle and a universal adapter for use with TIC 410A Hot Stick attachment to extend reach • Drop-proof to 6 feet (1.8m) SPECIFICATIONS: • VolTect™ Non-Contact, High Voltage Detection: Low Voltage Setting: 30 V ac → 1500 V ac and High Voltage Setting: 1500 V ac → 122,000 V ac (with Hot Stick TIC 410A) MSHA certified and intrinsically safe, the Amprobe TIC 300 PRO High Voltage Detector with VolTect alert is a rugged, reliable, non-contact, high voltage tester for utility, industrial, and mine safety applications up to 122 kV. Select low or high voltage levels to verify the presence of voltage without contacting the energized conductor. When this high voltage electricity tester is moved within close proximity of an energized line, the intuitive VolTect alert warns users with bright flashing lights and loud beeps. All functionality is available through push buttons designed for easy use with PPE gloves. A universal adapter Hot Stick TIC 410A is available (not included) for voltage higher than 1500 VAC. IS IT HOT OR NOT? The Amprobe TIC-300 PRO high voltage detector has been trusted by utility crews for over 20 years for verifying the presence or absence of voltage when it matters most - in high voltage environments. Lights flash and the TIC 300 Pro beeps with increasing frequency as it nears a source of electricity, leaving the user no doubt whether the area is live or not. Crews like how simple the TIC 300 PRO is to use. One bright yellow button turns it on or off, and two other buttons select high or low voltage ranges (a red light illuminates below which range has been selected). The buttons are also easy to push when wearing heavy PPE gloves. The unit tells you it’s on with an intermittent beep and a flashing light on the lower edge, easily visible from the user’s vantage point. A self-test feature verifies that the unit is working properly. RUGGED AND RELIABLE: The Amprobe TIC-300 PRO high voltage detector is a non-contact voltage detector for detecting alternating current (AC) on transmission lines, power distribution equipment, downed power lines, fuses, electrical outlets, and other power lines. It detects voltages in low, medium and high voltage applications (30-122kVAC) with bright visual and loud alerts. It is rugged and reliable for utility, industrial, heavy manufacturing and mine safety applications. The TIC tracers get thrown around in utility trucks, but the units are built to withstand the rough treatment. Some units have been known to last more than 20 years. PACKED WITH FEATURES: The Amprobe TIC-300 PRO has a low-voltage setting (30 to 1,500 VAC) for checking voltage presence in breaker panels, breakers, power outlets and wiring. It also has a high-voltage setting (1,500 to 122,000 VAC when used with the TIC-410A Hot Stick attachment) for checking transmission lines, downed power lines and substations. The presence of AC voltage is indicated by an LED light and audible beeper. It is MSHA certified and intrinsically safe. The TIC-300 PRO has a self-test that verifies the tester works properly and is drop-proof up to 6 feet.

INCLUDES: • BT-120 Transmitter • BT-120 Receiver • 9 V Alkaline Battery (installed) • User Manual FEATURES: • Identifies 120V circuit breakers • Adjusts sensitivity automatically • Microprocessor controlled • Quick and easy to use • Extremely accurate readings (always finds the right breaker) • Durable and dependable SPECIFICATIONS: • Voltage range: 90 V ? 120 V • Frequency range: 50 Hz ? 60 Hz The Amprobe breaker finder works on energized systems and is designed to quickly and easily identify breakers in residential and commercial environments. Automatic sensitivity adjustment removes ambiguity from the results of the tracing, and the receiver will clearly and quickly identify the breaker with sound and light. The BT-120 Circuit Breaker Tracer works on all electrical systems from 90 V to 120 V AC so you can meet the latest code requirements. AUTOMATIC SENSITIVITY ADJUSTMENT: The receiver always finds the right breaker - automatic sensitivity adjustment removes ambiguity from the search by indicating single, correct breaker with light and sound. IDENTIFIES CIRCUIT BREAKER LOCATION: Plug transmitter into an outlet and receiver will find the corresponding breaker. The red LED indicator on the transmitter verifies that the receptacle is energized before tracing, and when the LED is off it confirms that the correct breaker was switched off for that receptacle or wiring maintenance. PERFECT FOR OFFICE, RESIDENTIAL AND HVAC APPLICATIONS: Works on all electrical systems from 90 to 120 VAC, microprocessor controlled, durable and dependable.

INCLUDES: • BAT-200 Battery Tester • User’s Manual FEATURES: • Easy-to-read color-coded display with “good,“low and “replace/recharge indicators • Works with standard and rechargeable batteries • Compatible with: 9V, AA, AAA, C, D, 1.5V button type • Compact design • Ergonomic battery holder SPECIFICATIONS: • Battery type: 9V, AA, AAA, C, D, 1.5V Button type • Analog scale: Yes Perfect for home use. Battery failure is one of the most common causes for sensor or instrument failure. The BAT-200 Battery Tester indicates the amount of charge remaining in standard and rechargeable batteries. The analog display needle moves on a color-coded, calibrated scale to quickly identify 'good' (green), 'low' (yellow), and 'replace/recharge' (red) battery status. The BAT-200 tests 9V, AA, AAA, C, D and 1.5V Button Type batteries. Tester does not require any internal batteries to operate. OPERATING THE BAT-200: Battery voltage decreases as the battery is discharged. Slightly used batteries may show close to full voltage. This means as long as the battery is not in the yellow or red field (indication of low voltage); the battery does not need to be replaced. HIGH CURRENT/HIGH LOAD SITUATIONS : For testing batteries used in high current/high load situations such as digital cameras, the battery may need to be replaced when tester indicates battery charge is in the low end of the “good” range (near yellow field). These batteries can still be used in low load applications such as in remote controls. TESTING DIFFERENT BATTERY TYPES: Rechargeable Batteries are typically 1.2V when fully charged versus 1.5V for normal alkaline batteries, but they have a higher battery capacity (mAh). Because the BAT-200 tests for voltage, these batteries are still usable when the tester indicates green or yellow fields. When testing batteries, ensure the negative terminal is on top (battery upside down). For button batteries (1.5V only), the negative terminal is on top (look on printing on top of battery to verify terminals and 1.5V voltage).

INCLUDES: • (1) Milliohmmeter Battery Powered • (1) Test leads • (1) Battery (installed) • (1) User manual FEATURES: • Accurate four terminal measurement down to 100µ ohms does not requIRe test leads resistance compensation • Ranges from 200.0m ohms to 2000 ohms with minimum resolution of 100µ Ohm • Measurement precision with three test currents with over-temperature protection SPECIFICATIONS: • Unit Weight (KG): 1.2 • Unit Height (CM): 12.7 • Unit Length (CM): 30.48 • Unit Width (CM): 22.86 Diagnose potential failure with the MO-100, portable battery powered Milliohm Meter. Quickly check windings opens or shorts in motors, generators and transformers, wire-to-wire connection resistances, heating elements testing and contact resistance in critical electrical connections.

INCLUDES: • (1) Batteries (installed) • (1) User manual • (1) Carrying case • (1) Leak check bottle • (1) AC adapter FEATURES: • Precisely pinpoints a place of the leaks of the refrigerant in air-conditioning systems • Sensor detects halogenated refrigerants such as R-134a, R-404A, R-407C, R-410A, R-22, freon, etc • Suction pump provides instant response and quick sensor clearing, which speeds up the leak detection process • Cutting edge accuracy with microprocessor controlled semiconductor gas sensor and advanced digital signal processing • High-medium-low leak sensitivity selector • Low battery indication • 15.5 (40 CM) flexible stainless probe • Reference leak source included SPECIFICATIONS: • Manufacturer Warranty: 1 YR • Packaging Type: Case • Packaging Material: Case Troubleshoot air conditioning systems quickly and accurately with Amprobe RLD-1 refrigerant leak detector. State of the art technology assures precise, unambiguous readings, and makes leak detection across a wide variety of refrigerants easy and quick.

INCLUDES: • CO2-100 Carbon Dioxide Meter • 4 x 1.5 V AA Batteries (installed) • Hard Carrying Case • User Manual FEATURES: • Low drift portable meter for checking indoor air quality • CO2 measurement up to 9999 ppm • Triple display with simultaneous CO2, temperature and relative humidity readings • Selectable display of dew point and wet bulb • Air quality analysis with displays of: • TWA display (time-weighted average) for 8 hrs period • 15 minutes STEL (short-term exposure limit) value • High performance low drift sensor designed with NDIR (non-dispersive infrared) waveguide technology • Easy to read large LCD display • Manually calibratable • Audible alarm threshold setting to setup warning against carbon dioxide level • Backlight function for working in dark area • Optional PC download capabilities • Data hold • Maximum, minimum, average functions • Long time drift compensation for accurate readings SPECIFICATIONS: • C02: 0 ? 9999 ppm • Temperature range: 14 °F ? 140°F (-10 °C ? 60 °C ) • RH range: 0 % ? 95 % • DP (dew point temperature): -4 °F ? 139.8 °F (-20 °C ? 59.9 °C) • WB (wet bulb temperature): 24.8 °F ? 139.8 °F (-5.0 °C ? 59.9 °C) • Resolution: 1 ppm - CO2 concentration, 0.1 °C / °F - Temp, 0.1 %RH - humidity The meter measures CO2 level, air temperature, dew point, wet bulb temperature and humidity and is an ideal instrument for indoor air quality (IAQ) diagnosis. Poor indoor air quality is considered unhealthy because it causes tiredness, loss of ability to concentrate, and even illness (ex. Sick Building Syndrome). IAQ monitoring and survey, especially on CO2 level and air ventilation become widely applied in public areas such as offices, classrooms, factories, hospitals and hotels. It is also suggested in regulations of industrial hygiene in some countries. (Appendix). The portable CO2 meter uses NDIR (non-dispersive infrared) technology to ensure the reliability and long-term stability. It’s useful in verifying HVAC system performance and air ventilation control. TRIPLE MEASUREMENT DISPLAY: Easy to read large LCD display shows CO2 level (up to 9999 ppm), temperature and humidity. Additional selectable display of Dew Point and Wet Bulb. CHECK AIR QUALITY IN A VARIETY OF ENVIRONMENTS: Ideal for indoor air quality (IAQ) diagnosis, monitoring and verifying in industrial, commercial and residential applications. AUDIBLE CO2 WARNING ALARM: Audible alarm threshold setting to setup warning against carbon dioxide levels.

INCLUDES: • (1) Set Test leads with threaded alligator clips • (1) 9 V battery (installed) • (1) Magne-Grip™ Holster with magnetic hanging strap • (1) Temperature adapter • (1) Type K thermocouple probe • (1) Spare fuse • (1) User manual FEATURES: • Frequency to 1 MHz, temperature to 1832 °F, capacitance to 4000 °F • Input warning tone when test leads are in wrong jack • 1000 V/750 V DC/AC • 10 A AC/DC, fully safety fused • Resistance to 40 MO • Continuity beeper • MIN/MAX, Data Hold and Range Lock • Auto Power Off to save battery life • Separate door for easy battery and fuse access • Magne-Grip™ Holster with magnetic hanging strap • Three year warranty SPECIFICATIONS: • Manufacturer Warranty: 3 years • Packaging Type: Package • Packaging Material: Plastic • Unit Weight (KG): 0.78 • Unit Height (CM): 8 • Unit Length (CM): 29.5 • Unit Width (CM): 20.1 True RMS digital multimeter with temperature and backlight for contractors and field service technicians.

INCLUDES: • MT-10 Moisture Meter • 9V Battery • Users Manual • Headphones FEATURES: • Checks for moisture content in wood, paper or cardboard and building materials such as sheetrock, concrete, mortar, plaster, etc. • Measurement ranges: Wood/ Paper: 8 ~ 60% • Building material: 0.3 - 2.0% Temperature: 0°C ~ 40°C or 32°F ~ 99°F • Used in indoor air quality applications for detecting moisture in the walls, floors and ceilings stimulating mold growth • LCD display provides moisture or temperature measurement • Three color LED provides quick moisture indication: Green - “air-dry conditions, Yellow - increased moisture and Red - excess moisture • Backlight for operation in dark areas • Low battery indication • Auto power off SPECIFICATIONS: • Measurement range: Wood: 8 ~ 60% , Building material: 0.3-2.0% and Temperature: 0 ~ 40°C or 32 ~ 99°F • Resolution: Wood: 0.10%, Building material: 0.01% and Temperature: 0.1°C / 0.2°F • Accuracy: Wood: ±2%, Building material: ±0.1% , Temperature: ±1°C / ±2°F and Battery: 9V, 6F22 Measure moisture content for wall board, wood or other building materials to determine places of harmful mold growth or unseen water damage. Typical application also includes checking moisture of concrete slab and wood before installation of floors, determining wood moisture content during drying process, and checking wood moisture before material is used for woodworking applications. VARIETY OF APPLICATIONS: Used in indoor air quality applications for detecting moisture in the walls, floors and ceilings stimulating mold growth. LED MOISTURE DETECTION: Three color LED provides quick moisture indication: Green - “air-dry” conditions, Yellow - increased moisture and Red - excess moisture. WIDE RANGE OF MEASUREMENTS: Measurement Ranges: Wood/ Paper: 8 ~ 60% , Building Material: 0.3 - 2.0% and Temperature: 0°C ~ 40°C or 32°F ~ 99°F.

INCLUDES: • (1) Wiring Inspector FEATURES: • Verifies if Wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load • Faulty splices and connections • Checks for faulty GFCI, and faulty or incorrectly wired AFCI's. unit will locate incorrect polarization, bad grounds and shorts. SPECIFICATIONS: • Unit Weight (KG): 0.82 • Unit Height (CM): 8.13 • Unit Length (CM): 26.67 • Unit Width (CM): 17.78 The rugged Amprobe INSP-3 Wiring Inspector Circuit Tester verifies in seconds whether a building's wiring (including voltage drop under load) complies with electrical code. This saves time and money by eliminating guess work. The large display shows all relevant test data so you can quickly identify issues with splices, connections, and conductor quality that are crucial to safety and performance, without scrolling or switching screens. Select a 10, 15, or 20 amp load on the electricity tester then read the results. A flashing screen clearly indicates incorrect wiring or failures. This wire tester won't trip circuit breakers or blow fuses during the test.

INCLUDES: • PY-1A Voltage Tester • User manual FEATURES: • Test for presence of voltage and indicates voltage level • AC Volts 120/240/277/480 • DC Volts 160/330/380/480 • Simple one hand operation, no buttons or setups • Four neon bulb indicator lamps • Small pocket size • Built in test leads holder • CAT III 600V SPECIFICATIONS: • AC Voltage: 120 V, 240 V, 277 V, 480 V • DC Voltage: 160 V, 330 V, 380 V, 480 V The Amprobe PY-1A Voltage Tester is compact and easy to use. Designed for the professional electrician and home user alike, this solidly built electrical tester will deliver years of trouble-free service. The bright series of neon lights indicates the detected AC voltage at 120, 240, 277, and 480 V and DC voltage at 160, 330, 380 and 600 V. Using the two integrated test leads, the unit automatically displays detected AC or DC voltage from receptacles, appliances, computers, wire cables, circuit breakers, junction boxes, and other electrical circuits. The test probes can be snapped into the back of the unit for convenient storage or for one-handed receptacle testing. The unit is designed for use on both energized and non-energized circuits and includes a test current of up to 3.5 mA. It is powered by two alkaline AAA batteries (included) and meets European Standards (EN) 61010-1 Category III 600 V. ONE HANDED VOLTAGE TESTING: Small and compact design measures AC voltage up to 480 V and DC voltage up to 600 V. COMPACT AND EASY-TO-USE: This Electrical Tester is for universal applications for indoor use only. It represents a valuable support for all testing in handicraft and industrial applications. BRIGHT NEON AC/DC VOLTAGE DISPLAY: Four bright neon lights indicate AC and DC voltages even in well-lit rooms.

INCLUDES: • (1) Pair of Test leads • (1) Carrying case • (1) Magne-Grip™ Holster with magnetic hanging strap • (1) Temperature adapter • (1) Type K thermocouple probe • (1) 9 V battery (installed) • (1) User manual FEATURES: • Temperature measurement capability to 1000 °C/1832 °F (Type K thermocouple included) • 750 V AC/1000 V DC—highest voltage rating in this class of meter • Capacitance for motor run/start test • 0.1 μA resolution for flame sensor testing • Frequency to 1 MHz • Resistance to 40 MΩ • Data hold freezes display • Magne-Grip™ holster • VolTect™ non-contact voltage detector • Triple safety ratings SPECIFICATIONS: • Manufacturer Warranty: 1 year • Packaging Type: Package • Packaging Material: Plastic • Unit Weight (KG): 0.62 • Unit Height (CM): 9 • Unit Length (CM): 26 • Unit Width (CM): 18.5 A compact, full-featured digital multimeter for plant maintenance, HVAC, electrical and electronic applications.

INCLUDES: • TMD-56 Thermometer • 4. 1.5 V AAA Batteries • USB Cable • Software CD • K-Type Thermocouple (2) • User Manual FEATURES: • Backlit triple-display • Built in memory: 16 sets, Maximum 16000 data points • Data-logging:256 samples with real-time data per channel • Easy Data Recall with up and down key: T1, T2, T1-T2, Time and Memory Location • Thermocouple Offset Adjustment • REC, MAX, MIN, MAX-MIN, Average, Relative Zero and HOLD functions • Resolution 0.1°C/1°C, 0.1°F/1°F • Warning beeper with Hi/Lo setting • User selectable recording interval • Real time clock with calendar SPECIFICATIONS: • Thermocouple type: K, J, T, E, R, S, N • Basic accuracy: 0.05 % • Number of parameters on the display: 3 • Real time clock - wireless beeper with setting: Yes • Data capture: 256 Samples • Data logger: 16000 Points • PC interface: USB Amprobe TMD-56 thermometer with USB download capability is a professional choice for HVAC/R technicians, electricians, research, industrial process, and quality control. This model comes with a dual input that allows easy access to easy super-heat and sub-cool temperature measurement as well as cut-out and in temperature measurements. LARGE DISPLAY: The Amprobe TMD-56 has a 4½ digit liquid crystal display (LCD) with a maximum reading of 19999. THERMOCOUPLE TYPE TEMPERATURE RANGE: K-TYPE: -328 °F ? 2501 °F (-200 °C ? 1372 °C), J-TYPE: -346 °F ? 2192 °F (-210 °C ? 1200 °C), T-TYPE: -328 °F ? 752 °F (-200 °C ? 400 °C), E-TYPE: -346 °F ? 1832 °F (-210 °C ? 1000 °C), R-TYPE: 32 °F ? 3212 °F (0 °C ? 1767 °C), S-TYPE: 32 °F ? 3212 °F (0 °C ? 1767 °C) and N-TYPE: -58 °F ? 2372 °F (-50 °C ? 1300 °C).

INCLUDES: • LM-200 LED Light Meter • 9V Battery (installed) • Carrying Case • User Manual FEATURES: • Lux or footcandle user selectable measurement units • Measuring range of 200,000 lux or 20,000 foot candles • Data hold to freeze reading on the digital display • MAX recording to capture highest light measurement • Measuring lights source include all visible ranges • Spectral response close to CIE luminous spectral efficiency • Angled light cosine correction • Extended length of wire for light sensor approximately 5 feet (1.5m) • Measurements according to JISC1609:1993 and CNS 5119 general A class specifications • Includes protective sensor cap • Large, 3-1/2 digit display SPECIFICATIONS: • LED Light measurement: 200 lux, 2,000 lux, 20,000 lux, 200,000 lux 20, 200, 2,000, 20,000 foot-candle • Display: 2000 count LCD • Sensor: Silicon photodiode and filter • LED light measurement: 3½ digits, 2000 readings • Power supply: 9V NEDA 1604, IEC 6F22, JIS 006P battery The Amprobe LM-200LED light meter measures up to 400,000 lumens per square meter (lux) or 40,000 foot-candles (fc) of light output from LED light sources, has a silicon diode sensor and filter, and is designed for indoor operation at altitudes below 2,000 meters. The dual-scale meter also features built-in memory that stores up to 99 records, a data hold feature that freezes readings on the display, a maximum recording option to display the highest reading, and angled light cosine correction to calculate the amount of light, regardless of the light's angle. The meter is powered by a 9V battery (included) which has an average life of 200 hours. The sensor has a 1.5-meter wire for positioning the light sensor, and a protective sensor cap. MEASURES LED LIGHT SOURCES: A professional tester specifically designed to accurately measure light output of the LED light sources. MEASURES LUX OR FOOT-CANDLES: The Amporbe LM-200 has a measuring range of 200,000 lux or 20,000-foot candles. EASY-TO-USE: The sensor has a 1.5-meter wire for positioning the light sensor, and a protective sensor cap

INCLUDES: • (1) Software CD • (1) RS-232 Cable FEATURES: • Enables transfer of data from Amprobe 38XR-A digital multimeter to a computer • Provides a graphical user interface for viewing uploaded data on a computer • RS-232 data cable connects the Amprobe 38XR-A Digital Multimeter to a computer • Data can be exported to Microsoft Excel for processing and analysis • Software works on computers running the Windows operating system SPECIFICATIONS: • Manufacturer Warranty: 1 year • Packaging Type: Package • Packaging Material: Plastic • Unit Weight (KG): 0.28 • Unit Height (CM): 4.5 • Unit Length (CM): 24.8 Amprobe 38SW-A RS232 Software/Cable.

INCLUDES: • (1) Set Test leads with threaded alligator clips • (1) 9 V battery (installed) • (1) Magne-Grip™ Holster with magnetic hanging strap • (1) Temperature adapter • (1) Type K thermocouple probe • (1) Spare fuse • (1) User manual FEATURES: • Frequency to 10 MHz, capacitance to 400 uF, temperature to 2372 °F • Duty cycle, dBm and 4 to 20 mA loop current test • 1000 V/750 V DC/AC True RMS, AC + DC input • 10 A AC/DC, fully safety fused • Resistance to 40 MΩ • Continuity beeper • MIN/MAX, Average, Relative, Peak and Data Hold • Bright blue backlight • Auto power off to save battery life • Separate door for easy battery and fuse access • Magne-Grip™ Holster with magnetic hanging strap • CAT IV 600 V rated • Three-year warranty SPECIFICATIONS: • Manufacturer Warranty: 3 years • Packaging Type: Package • Packaging Material: Plastic • Unit Weight (KG): 0.783 • Unit Height (CM): 7 • Unit Length (CM): 29 • Unit Width (CM): 20.5 True RMS digital multimeter with optical PC interface for engineers designing and troubleshooting industrial automation and control systems.

INCLUDES: • (1) Residential Digital Multimeter • (1) 9V(6F22) x1 battery installed • (1) Test leads • (1) Users manual FEATURES: • Voltage up to 600 V AC/DC, AC/DC current and resistance • Frequency, capacitance, duty cycle for troubleshooting applications • VolTect™ non-contact voltage detection SPECIFICATIONS: • Unit Weight (KG): 0.6583 • Unit Height (CM): 18.288 • Unit Length (CM): 4.572 • Unit Width (CM): 8.89 Compact yet tough, the Amprobe AM-510 autoranging digital multimeter delivers rugged, accurate performance for light commercial and advanced residential applications like rewiring an electrical panel, installing heated floors and light fixtures, troubleshooting and repairing home appliances, electrical sockets, and automotive electrical problems. Its CAT III safety rating and ease of use make it ideal for high voltage multimeter applications. Innovative digital multimeter features expedite go/no-go checks, and the built-in flashlight makes it easy to see wires and fuses in the dark. Plus a rubber tilt stand and a probe holder give you a third-hand when you need it.

INCLUDES: • (1) Electrical Contactor Digital Multimeter With True-Rms • (1) 9V(6F22) x1 battery installed • (1) Test leads • (1) Type-K Probe x 1 • (1) Velcro strap Carrying Case • (1) Users manual FEATURES: • Voltage up to 750 V ac and 1000 V dc, AC/DC current, resistance, frequency, capacitance, and temperature. • CAT III 600 V, CAT II 1000 V • True-RMS SPECIFICATIONS: • Unit Weight (KG): 0.816 • Unit Height (CM): 31.75 • Unit Length (CM): 20.32 • Unit Width (CM): 10.795 The Amprobe AM-530 autoranging digital multimeter is the multimeter of choice for professional electrical contractors. The AM-530 is a True-rms digital multimeter so it accurately measures voltage on systems affected by harmonics. With its full menu of digital multimeter features, you can use it to: measure and verify the presence of voltage before connecting new equipment or performing repairs; run new wiring; check continuity of electrical connections; identify blown fuses; troubleshoot motors or check transformers. The CAT III 600V safety rating provides an extra measure of safety for high voltage multimeter applications. Its built-in flashlight helps you see wire colors in the dark and third hand probe holder gives you an extra hand when you need it.

INCLUDES: • Amprobe IR-730 Infrared Thermometer • 9 V Battery (installed) • Carrying Bag • User Manual FEATURES: • 30:1 Distance to Spot Ratio • Temp Range of -26°F to 2282°F or -32°C to 1250°C • Precision accuracy and rapid response time • Laser pointer, backlit dual LCD Display • Auto display hold and MAX/MIN memory • Adjustable emissivity for measuring a variety of materials SPECIFICATIONS: • Distance to Spot (D:S): 30:1 • Temperature Range: -26 ? to 2282 ?, -32 °C to 1250 °C • Best Accuracy: ±1.8% • Emissivity: Adjustable from 0.10 to 1.00 • Display Resolution: 4000.1 ?C / 0.1 ?F • MIN/MAX Memory • DIF/AVG Temperature Display • Tripod mount The Amprobe IR-700 series of infrared thermometers is a complete line of high performance diagnostic tools designed for residential use, HVAC/R, electrical, industrial maintenance, automotive, quality control, fire prevention, home thermal leak detection, and hobbyist applications. The bright backlit LCD dual display continuously shows both current temperature and either the maximum or minimum temperature detected, which is very useful when looking for hot or cold spots in home insulation, circuit panels or automotive engines. Measure temperatures quickly and accurately without having to touch the object. LASER POINTER FOR ACCURATE TARGETING: The Amprobe IR-730 Infrared Thermometer is designed to measure temperatures quickly and accurately without having to touch the object. Lightweight, compact, and easy to use, the IR-730 can safely measure hot, hazardous, or hard-to-reach surfaces from a distance. The thermometer’s optics measure emitted, reflected and transmitted energy, which is collected and focused onto a detector two times per second for precise accuracy. The laser pointer indicates where the unit is measuring. EMISSIVITY FOR MEASURING A VARIETY OF MATERIALS: The unit allows for the adjustment of the measured energy for different surface types (adjustable emissivity). For precision measurements requiring the highest accuracy, the emissivity can be adjusted to a specific material type. Emissivity is digitally adjustable from 0.10 to 1.00, in increments of 0.01, for testing a variety of materials.PRECISE MEASUREMENT WITH DISTANCE TO SPOT RATIO OF 30:1: The larger the Distance to Spot Ratio (D: S) the better the resolution and the smaller the area that can be measured. To measure small objects, hold the unit closer. For example, to measure a 1” spot with the IR-730, hold the unit at 30” from the item to be measured.