Amana 55388 Specifications:
• Diameter: 1-7/8"
• Carbide height: 1-3/32"
• Shank: 1/2"
• Length: 2-5/8"
Amana 55388 Features:
• The glue joint cut by this bit is strong and self-aligning.
• One setup produces both halves of the joint.
• Adjust the bit so the center of the profile aligns with the stock center.
• Cut one part face down, the mate face up.
• Bit works on stock center between 5/8" and 1" in thickness.
• Must be used in a table-mounted router.
• Since there is a no guide bearing, use the router-table fence to control the cut.
INCLUDES:
• (1) 2-5/8" Lock Miter Router Bit
FEATURES:
• First piece is cut flat (horizontal) and the second is cut perpendicular (vertical) to the first for a perfect fit
• There is no need to re-align the router depth, provided that the wood is centered to the cutting edge of the bit
• Not recommended for use in a pin router nor a router table unless the length of your material can be handled easily
SPECIFICATIONS:
• Length: 2-5/8 Inch
• Diameter: 2-11/16 Inch
• Flute Length: 1-3/16 Inch
Amana 55392 Specifications:
• Diameter: 1-9/16"
• Carbide Height: 1-3/8"
• Shank: 1/2"
• Length: 3-3/4"
Amana 55392 Features:
• With this assembly, you can cut one-finger through five-fingers in multiple passes.
• Both cuts are performed the same way; you simply turn over the counter-cut for a perfect fit (see diagrams).
• All cutters feature 'chipbreakers' behind each cutting tooth which limits the thickness of the chip, allowing for a safer cut.
• Assembly includes 5 individual finger cutters, 1/2" shank arbor, 1 straight cutter, ball bearing guide, shims, spacers, washers and complete illustrated instructions.
• Can be used on 7/16" (1-finger) through 1-3/8" stock (5-fingers).
Amana 55400 Tongue And Groove 1/2" Shank Router Bit
Regular price
$71.15
/
Amana 55400 Specifications:
• Diameter: 1-5/8"
• Cutting Height: 3/4"
• Shank: 1/2"
• Cuts Tongue and Groove: 3/8" Deep
Amana 55400 Features:
• Cut perfectly fitted tongue-and-groove joints on stock between 1/2" and 3/4" thick with a table-mounted router and this assembly.
• The tool consists of an arbor with an integral shank, two identical, removable slotting cutters, and a pair of bearings.
• To cut tongues, sandwich one bearing between the two cutters.
• To cut slots, mount one cutter between the two bearings.
Amana 55410 Specifications:
• Diameter: 1-1/4"
• Angle: 15°
• Carbide Height: 1-1/4"
• Shank: 1/2"
• Length: 2-3/4"
Amana 55410 Features:
• The tongue-and-groove joint cut by this two-bit set can be used for applications as diverse as assembling broad tabletops and other panels and making strip flooring.
• Use it on stock from 5/8" through 1-1/4" thick.
• The bits are available individually or as a two-piece set. Use in a tablemounted router.
Amana 55412 Specifications:
• Diameter: 1-1/4"
• Angle: 15°
• Carbide Height: 1-1/4"
• Shank: 1/2"
• Length: 2-3/4"
Amana 55412 Features:
• The tongue-and-groove joint cut by this two-bit set can be used for applications as diverse as assembling broad tabletops and other panels and making strip flooring.
• Use it on stock from 5/8" through 1-1/4" thick.
• The bits are available individually or as a two-piece set. Use in a tablemounted router.
Amana 55430 2 Piece Stile And Rail 1/2" Shank Router Bit
Regular price
$123.45
/
Amana 55430 Specifications:
• Pattern Type: Ogee
• Diameter: 1-5/8"
• Radius: 1/4"
• Carbide Height: 1-1/16"
• Shank: 1/2"
• Length: 3-5/16"
Amana 55430 Features:
• These types of sets utilizes two different cutters that are 'coped' to each other.
• Also included are extra cutters for trimming and rabbeting and spacers if you decide to use the bearings similar to a 'reversible' set.
• With trim cutters #55448 & #55450 - use on 7/8" through 1" stock use.
• For 5/8" through 7/8" stock, substitute trim cutters with spacers.
Amana 57147 2-5/16" Corner Rounding Router Bit with Ultra-Glide Radius Bearing
Regular price
$39.65
/
INCLUDES:
• (1) 2-5/16" Corner Rounding Router Bit with Ultra-Glide Radius Bearing
FEATURES:
• A unique pilot bearing allows you to produce a true 180° bullnose with this corner rounding bit
• Unlike a regular square-edge bearing, it follows the radiused surface produced on the first pass
• Will neither leave a flat spot nor gouge the edge
• Use the (optional) regular 1/4" x 5/8" steel bearing for the first pass
SPECIFICATIONS:
• Length: 2-5/16 Inch
• Diameter: 3/4 Inch
• Flute Length: 3/8 Inch
Amana 57192 Specifications:
• Diameter: 2-1/8"
• Depth of Cut: 1-1/2"
• Radius: 3/4"
• Carbide Height: 1"
• Shank: 1/2"
• Length: 3"
Amana 57192 Features:
• A unique pilot bearing allows you to produce a true 180° bullnose with this corner rounding bit.
• Unlike a regular square-edge bearing, it follows the radiused surface produced on the first pass.
• Will neither leave a flat spot nor gouge the edge.
• Use the (optional) regular 1/4" x 5/8" steel bearing for the first pass.
Amana 610504C 10" x 50T Combination Ripping And Cross-Cut Circular Saw Blade
Regular price
$72.71
/
Amana 610504C Specifications:
• Diameter: 10"
• Teeth: 50
• Bore: 5/8"
• Kerf: 0.135"
Amana 610504C Features:
• Carbide saw blade is designed for ripping and cross-cutting natural woods.
• Teeth consist of four ATB followed by one square raker.
• Large gullets in the saw body allow for deeper cuts & improved chip ejection despite short pitch.
INCLUDES:
• (1) Carbide Tipped 12"/60T ATB, 10° X 1" Bore Circular Saw Blade
FEATURES:
• Suitable for hardwood, softwood, even plywood and chipboard
• Good choice for heavy production in any cabinet-making shop.
SPECIFICATIONS:
• Diameter: 12 (300mm)
• Teeth: 60
• Bore: 1
• Tooth Grind: ATB
• Hook Angle: 10°
• Kerf (B): .126 (3.2mm)
• Plate: .087 (2.2mm)
As our standard cut-off and crosscut blade, this is ideal for table saws and sliding table saws. Its combination of 10° hook and the alternate top bevel tooth grind provide good-quality cuts and a long cutting life
Amana 612601-30 Specifications:
• Diameter: 12"
• Teeth: 60
• Grind: TCG
• "B" Kerf: .126
• "C" Plate: .087
• Bore: 30 mm
Amana 612601-30 Features:
• General trimming and cross-cutting of natural woods, plywood, composition material and single or double-sided plastic laminated material
Amana FO-317 Specifications:
• Size: 1-1/4"
• Shank : 3/8"
Amana FO-317 Features:
• Forstner bits make clean sharp holes with straight sides and flat bottoms, for use with any 3/8" or larger portable drill or drill press.
• With their circular rim, forstner bits can be used for boring operations that are impossible using other types of bits.
• Such applications include holes drilled at angles to the work surface, overlapping holes, and 'pocket' holes on the edge of work piece.
• Amana forstner bits are sharp, and accurately ground, with a slight back taper to keep them from binding.
• Heat-treated carbon steel forstner bits will hold their edge fairly well in solid wood, but will dull rapidly when used on composites, laminates, etc
Show 12 products per page Show 24 products per page Show 48 products per page
Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity
Amana ICK30 Specifications:
• Replacement Knives for Tool No. RC-1002 and RC-1004 (sold separately)
Amana ICK30 Features:
• Each throw-away knife in this flush trimming bit has multiple edges.
• Rotate the knife to expose a fresh cutting edge.
• Tips can be replaced at any time, even mid-job, without changing the router setup.
