Amana 51566 Specifications:
• Thickness: 1-1/2"
• Radius: 3/4"
• Carbide height: 2"
• Diameter: 2-3/8"
• Shank: 1/2"
• Length: 3-1/2"
• Flute: 3
Amana 51566 Features:
• Shape the full edge of a workpiece with a bullnose radius bit.
• Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings.
• The “nose diameter” is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover.
• Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.
• Must be used with an edge guide on handheld routers or the fence on a router table.
• Use in a table mounted router
• Not for use in a hand held router!
Amana 51572 Specifications:
• Thickness: 3/4"
• Radius: 3/8"
• Carbide height: 1-5/16"
• Diameter: 1-3/8"
• Shank: 1/2"
• Length: 3-1/4"
Amana 51572 Features:
• Shape the full edge of a workpiece with a bullnose radius bit.
• Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings.
• The “nose diameter” (M) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover.
• Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.
• Must be used with an edge guide on handheld routers or the fence on a router table.
INCLUDES:
• (1) 2-1/2" Convex Edging Router Bit
FEATURES:
• Cuts a shallow arc—the fingernail shape—rather than a full 180-degree roundover
• Like the bullnose radius bit, it has short flats above and below the cutter arc, which produce fillets on stock thicker than 7/8"
• Must be used with an edge guide on handheld routers or the fence on a router table
SPECIFICATIONS:
• Length: 2-1/2 Inch
• Diameter: 1/4 Inch
• Flute Length: 1-1/4 Inch
Amana 51582 Specifications:
• Diameter: 13/16"
• Radius: 23/32"
• Carbide height: 1-1/4"
• Shank: 1/2"
• Length: 2-3/4"
Amana 51582 Features:
• Cuts a shallow arc—the fingernail shape—rather than a full 180-degree roundover.
• Like the bullnose radius bit, it has short flats above and below the cutter arc, which produce fillets on stock thicker than 7/8".
• Must be used with an edge guide on handheld routers or the fence on a router table.
Amana 51712 Specifications:
• Diameter: 1/4"
• Carbide Height: 1/4"
• Shank: 1/4"
• Length: 1-1/2"
Amana 51712 Features:
• This bit is used where laminate is applied over precut openings in the substrait.
• In a continuous operation, bore through the laminate and cut the laminate out of the opening.
• The plunge point bores through the laminate to begin, and the integral pilot rides along the opening’s inside edge to guide the trimming cut.
Amana 53306 Specifications:
• # Wings: 2
• Diameter: 1-7/8"
• Kerf: 1/8"
• Shank: 1/4"
• Length: 2-3/8"
Amana 53306 Features:
• Groove edges for T-moldings, splines or biscuits, and other purposes.
• Rout tongue and groove joinery.
• Slotting cutters are available with either 2 wing or 3 wing cutters.
• Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor.
• Use with all handheld and table mounted routers.
Amana 53400 Specifications:
• # Wings: 3
• Diameter: 1-7/8"
• Kerf: 1/16"
• Shank: 1/4"
• Length: 2-3/8"
Amana 53400 Features:
• Groove edges for T-moldings, splines or biscuits, and other purposes.
• Rout tongue and groove joinery.
• Slotting cutters are available with either 2 wing or 3 wing cutters.
• Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor.
• Use with all handheld and table mounted routers.
Amana 53402 Specifications:
• # Wings: 3
• Diameter: 1-7/8"
• Kerf: 5/64"
• Shank: 1/4"
• Length: 2-3/8"
Amana 53402 Features:
• Groove edges for T-moldings, splines or biscuits, and other purposes.
• Rout tongue and groove joinery.
• Slotting cutters are available with either 2 wing or 3 wing cutters.
• Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor.
• Use with all handheld and table mounted routers.
Amana 53404 Specifications:
• # Wings: 3
• Diameter: 1-7/8"
• Kerf: 3/32"
• Shank: 1/4"
• Length: 2-3/8"
Amana 53404 Features:
• Groove edges for T-moldings, splines or biscuits, and other purposes.
• Rout tongue and groove joinery.
• Slotting cutters are available with either 2 wing or 3 wing cutters.
• Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor.
• Use with all handheld and table mounted routers.
Amana 53406 Specifications:
• # Wings: 3
• Diameter: 1-7/8"
• Kerf: 1/8"
• Shank: 1/4"
• Length: 2-3/8"
Amana 53406 Features:
• Groove edges for T-moldings, splines or biscuits, and other purposes.
• Rout tongue and groove joinery.
• Slotting cutters are available with either 2 wing or 3 wing cutters.
• Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor.
• Use with all handheld and table mounted routers.
Amana 53410 Specifications:
• # Wings: 3
• Diameter: 1-7/8"
• Kerf: 1/4"
• Shank: 1/4"
• Length: 2-3/8"
Amana 53410 Features:
• Groove edges for T-moldings, splines or biscuits, and other purposes.
• Rout tongue and groove joinery.
• Slotting cutters are available with either 2 wing or 3 wing cutters.
• Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor.
• Use with all handheld and table mounted routers.
Amana 53600 Specifications:
• Depth of cut: 1/2"
• Diameter: 1-7/8"
• Overall length: 3"
• Kerf: 1/8" - 23/32"
• Wings: 2
• Shank: 1/2"
Amana 53600 Features:
• The 'Quadraset' with its four cutters enables you to cut grooves and dados from 1/8" through 23/32" (3.2MM-18.0MM) in increments of 1/32" (0.1MM).
• Tongue & Groove can also be achieved with proper set-up.
• Fully diagrammed instructions included for both fractional and metric sizes.
• Complete with four cutters (1/8", 5/32", 3/16", 1/4"), arbor, ball bearing guide, spacers, and shims.
Amana 53812 Specifications:
• Diameter: 2"
• Radius: 1/4"
• Carbide Height: 1-1/4"
• Shank: 1/2"
• Length: 2-3/4"
Amana 53812 Features:
• Produce clean, modern chests and cabinets uninterrupted by hardware pulls and knobs by integrating the pulls into the doors, drawers and lips.
• These one-pass cutters offer many appearance and ergonomic options, providing positive grips and softened, easy-on-the-fingers edges.
• All bits can be used in CNC and table mounted routers.
• Large diameter cutters will work in edge-guide or template-guide equipped handheld routers.
Amana 54102 Classical 1-1/4" Diameter 1/4" Shank Router Bit
Regular price
$48.65
/
Amana 54102 Specifications:
• Diameter: 1-1/4"
• Radius: 13/64"
• Carbide Height: 5/16"
• Shank: 1/4"
• Length: 2"
Amana 54102 Features:
• This bead-and-cove combines the two basic forms, separating them with a fillet.
• The cove comes off the pilot bearing.
• Produce a complex profile in a single pass.
• Use in either handheld or table mounted routers.
Amana 54106 Specifications:
• Diameter: 1-1/2"
• Radius: 7/32"
• Carbide Height: 5/8"
• Shank: 1/4"
• Length: 2-1/8"
Amana 54106 Features:
• This bead-and-cove combines the two basic forms, separating them with a fillet.
• The cove comes off the pilot bearing.
• Produce a complex profile in a single pass.
• Use in either handheld or table mounted routers.
Amana 54122 Ogee 1-3/8" Diameter 1/4" Shank Router Bit
Regular price
$62.25
/
Amana 54122 Specifications:
• Diameter: 1-3/8"
• Radius: 1/4"
• Carbide Height: 11/16"
• Shank: 1/4"
• Length: 2-3/16"
Amana 54122 Features:
• The ogee is one the basic shapes used in moldings and decorative profiles.
• An S-shaped curve, it is convex at the top fairing down into a concave (shown inverted).
• The ogee bit is characterized by the concave shape coming off the pilot bearing.
• Using the optional 3/8" bearing produces a profile with a fillet at the convex end of the curve.
• Use in a handheld or table-mounted router.
