{"product_id":"amprobe-4867981-at-6020-high-resolution-2-5-tft-lcd-color-display-advanced-wire-tracer-kit","title":"Amprobe 4867981 AT-6020 High Resolution 2.5\" TFT LCD Color Display Advanced Wire Tracer Kit","description":"INCLUDES:\n• AT-6000-R Receiver\n• AT-6000-T Transmitter\n• TL-6000 Test Lead and Accessory Kit\n• CC-6000 Hard Carrying Case\n• (12) 1.5 V AA (IEC R6) Batteries (not installed)\n• User Manual\nFEATURES:\n• Traces wires in walls, ceilings, floors and corners\n• Locates breakers and fuses\n• Pinpoints shorts and opens\n• High resolution 2.5\" TFT LCD color display\n• Three Transmitter signal modes ?\"High Signal\" mode for normal circuits, ?\"Low Signal\" mode for precision tracing in difficult areas, ?\"Loop\" mode for closed loop de-energized circuits\n• Four Receiver tracing modes: \"Quick Scan\" mode allows for quick wire detection at a longer distance, \"Precision\" mode precisely pinpoints wires or faults located behind walls, floors, or ceilings, \"Breaker Identification\" mode facilitates quick and easy breaker locating and \"Non-Contact Voltage Detection\" mode utilizes passive tracing without the Transmitter to verify if a wire is energized\n• Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits\n• Compatible with optional Signal Clamp (CT-400) clamp-on attachment and TIC 410A Hot Stick attachment to extend your reach\nSPECIFICATIONS:\n• Measurement Category: (Receiver) CAT III 600 V (Transmitter) CAT III 600 V (Signal Clamp) CAT IV 600 V, CAT III 1000 V\n• Operating voltage: (Receiver \u0026amp; Transmitter) 0 to 600 V AC\/DC (Signal Clamp) 0 to 1000 V AC\n• Operating frequency: (Receiver \u0026amp; Transmitter) Energized: 6.25 kHz, De-Energized: 32.768 kHz (Signal Clamp) Wire tracing: 32.768 kHz and AC current measurement: 45 Hz to 400 Hz\n• Signal indications: (Receiver) Numeric, bar graph display and audible beep (Transmitter) LEDs and audible beep\n• Range detection (open air): (Receiver) Tip sensor, (Energized): Max distance via air: up to 20 ft (6.1 m), Pinpointing: approx. 1.97 in (5 cm), Tip sensor (De-energized): Max distance via air: up to 14.7 ft (4.5 m), Pinpointing: approx. 1.97 in (5 cm), NCV detection (40 to 400 Hz): Max. sensitivity: 90 V up to 6.56 ft (2 m) and Min. sensitivity: 600 V up to 0.39 in (1 cm)\nAmprobe’s newest wire tracer combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse. The Transmitter utilizes two optimized frequencies that allows for a clean and reliable signal. The Signal Clamp can be used in applications where there is no access to bare conductors by enabling the Transmitter to induce a signal into a wire through insulation. Whether you’re a novice user or an expert, the AT-6020 Amprobe Advanced Wire Tracer kit will help you get the job done fast. PACKED WITH TRACING MODES!: The AT-6000 series features 4 tracing modes: “Quick Scan” mode allows for quick wire detection at a longer distance, “Precision” mode precisely pinpoints wires or faults located behind walls, floors, or ceilings, “Breaker Identification” mode facilitates quick and easy breaker locating and, “Non-Contact Voltage Detection” mode utilizes passive tracing without the Transmitter to verify if a wire is energized. MEASURE A VARIETY OF CIRCUITS: Three Transmitter signal modes: “High Signal” mode for normal circuits, “Low Signal” mode for precision tracing in difficult areas and “Loop” mode for closed loop de-energized circuits. SIMPLE AND EASY-TO-USE: This Advanced Wire Tracer Kit is fully equipped with an automatic, simple user interface. Only 2 tracing frequencies for a cleaner, more reliable signal (energized 6 kHz, de-energized 33 kHz).","brand":"Amprobe","offers":[{"title":"Default Title","offer_id":30384316055626,"sku":"Amprobe 4867981","price":899.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3344\/7242\/products\/Amprobe-4867981_01.jpg?v=1570480567","url":"https:\/\/citysupplycompany.myshopify.com\/products\/amprobe-4867981-at-6020-high-resolution-2-5-tft-lcd-color-display-advanced-wire-tracer-kit","provider":"CitySupplyCompany","version":"1.0","type":"link"}