FEATURES:
• Tips on each side of the bit are offset, cutting twice as many fingers as you see tips on each side of the bit.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as table-mounted portable router.
SPECIFICATIONS:
• Overall Diameter: 1-3/8"
• Carbide Height: 1-9/16"
• Cut Depth: 5/16"
• Minor Height (m): 21/64"
• Shank Diameter: 1/2"
• Overall Length: 3"
Produces a joint that is stronger than the wood itself.
Freud 99-038 1-3/8" (Dia.) Raised Panel “V” Joint Bit
Regular price
$84.85
/
FEATURES:
• Bit does not have to be centered in the wood.
• Simply raise or lower the bit 3/32" to route the mating edge.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-3/8"
• Carbide Height: 1-37/64"
• Minor Height (m): 3/16"
• Shank Length: 80°
• Shank Diameter: 1/2"
• Overall Length: 3-1/16"
Mating surfaces that are at an angle, not vertical, so the dark lines like those created by standard finger joint bits are not visible.
Freud 99-039 2" (Dia.) Variable Height Finger Joint Bit
Regular price
$148.60
/
FEATURES:
• Replacement cutters available and uses arbor #60-152.
• Allows you complete freedom when producing finger joints.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2"
• Bearing Diameter: 1-3/8"(35mm)
• Carbide Height: 1-9/16"
• Cut Depth: 5/16"
• Shank Diameter: 1/2"
• Overall Length: 4-1/4"
Ideal for joining wood edge-to-edge or end-to-end, because the joint produced is stronger than the wood itself.
FEATURES:
• 99-035 cuts thinner panels for projects such as humidors and jewelry boxes.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers, as well as table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-15/32"
• Carbide Height: 7/8”
• Shank Length: 22-1/2°
• Shank Diameter: 1/2"
• Overall Length: 2-3/8"
Run one board vertically and the piece to be joined horizontally.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers
SPECIFICATIONS:
• Overall Diameter: 1-1/2"
• Carbide Height: 39/64"
• Minor Height (m): 1/16"
• Radius: 1/4"
• Shank Diameter: 1/2"
• Overall Length: 2-1/16"
99-050 copes the rails, sash bars and muntins, while 99-051 cuts the profile on all components. Includes instruction manual.
Freud 99-060 1-1/2" (Dia.) Rail & Stile Profile Bit
Regular price
$47.66
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-1/2"
• Carbide Height: 7/16"
• Minor Height (m): 1/16"
• Small Diameter: 1"
• Radius: 7/32"
• Shank Diameter: 1/2"
• Overall Length: 2-1/4"
99-060 and 99-061 bits cope and stick cut the rails and stiles, and also can be used alone to form a matching edge profile. 99-062 cuts the panel slot and the back of the tongue on the coped piece.
Freud 99-061 1-1/2" (Dia.) Rail & Stile Profile Bit
Regular price
$47.66
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-1/2"
• Carbide Height: 3/8"
• Minor Height (m): 1/8"
• Radius: 5/16"
• Shank Diameter: 1/2"
• Overall Length: 2-1/4"
99-060 and 99-061 bits cope and stick cut the rails and stiles, and also can be used alone to form a matching edge profile. 99-062 cuts the panel slot and the back of the tongue on the coped piece.
Freud 99-062 1-1/2" (Dia.) Rail & Stile Profile Bit
Regular price
$49.18
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-1/2"
• Carbide Height: 1/4"
• Shank Diameter: 1/2"
• Overall Length: 2-1/8"
99-060 and 99-061 bits cope and stick cut the rails and stiles, and also can be used alone to form a matching edge profile. 99-062 cuts the panel slot and the back of the tongue on the coped piece.
FEATURES:
• Precise shear angles provide a splinter-free finish,
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-3/4”
• Carbide Height: 5/8"
• Large Radius: 9/32”
• Small Radius (R2): 5/64"
• Shank Diameter: 1/2"
• Overall Length: 2-5/8"
Designed to compliment the profile formed on the face of the door created by the 99-064 Finger Pull door edge bit.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2-11/64"
• Carbide Height: 1-1/8"
• Minor Height (m): 5/32"~5/16"
• Minor Height (m2): 25/64"
• Small Diameter: 1-37/64"
• Shank Length: 45°
• Shank Diameter: 1/2"
• Overall Length: 3-3/8"
Set includes spacers that allow you to produce “V” paneling from 1/2", 3/4", or 1" thick stock.
Freud 99-214 2-3/4" (Dia.) French Provincial Raised Panel Bit
Regular price
$62.99
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2-3/4"
• Carbide Height: 11/16"
• Minor Height (m): 19/64"
• Small Diameter: 1/4"
• Angle (d): 20°
• Angle (d2): 30°
• Shank Diameter: 1/2"
• Overall Length: 2-3/16"
Produces raised panels used in doors and paneling from 3/4" stock. Adjust the length of the tongue by using a fence.
FEATURES:
• Drawer sides are formed vertically against the fence of the table.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2"
• Carbide Height: 33/64"
• Minor Height (m): 5/32"
• Small Diameter: 1-3/4"
• Shank Length: 30°
• Shank Diameter: 1/2"
• Overall Length: 2"
Drawer fronts are formed horizontally, flat on the table surface.
Freud 99-267 1-7/8" (Dia.) Entry & Interior Door Router Bit System
Regular price
$203.84
/
FEATURES:
• This Matched Rail and Stile Bit Set comes fully assembled to mill perfect 1-3/4" Rail and Stile joints for exterior doors. To mill 1-3/8" interior door joints, simply remove the spacers from each bit.
• Milling a tenon of virtually any length is easy: the top cutter and bearing of the rail bit is simply unscrewed from the lower cutter and shank, without removing the bit from the router or changing the height of the cutter!
• Cuts all composition materials, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-7/8"
• Bearing Diameter: 7/8"
• Carbide Height: 1-7/8"
• Shank Diameter: 1/2"
• Overall Length: 4-1/8"
This Entry and Interior Door System lets the woodworker build doors with true mortise and tenon construction for rock-solid joints that last a lifetime.
Freud 99-268 1-7/8" (Dia.) Entry & Interior Door Router Bit System
Regular price
$203.84
/
FEATURES:
• This Matched Rail and Stile Bit Set comes fully assembled to mill perfect 1-3/4" Rail and Stile joints for exterior doors. To mill 1-3/8" interior door joints, simply remove the spacers from each bit.
• Milling a tenon of virtually any length is easy: the top cutter and bearing of the rail bit is simply unscrewed from the lower cutter and shank, without removing the bit from the router or changing the height of the cutter!
• Cuts all composition materials, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-7/8"
• Bearing Diameter: 7/8"
• Carbide Height: 1-7/8"
• Shank Diameter: 1/2"
• Overall Length: 4-1/8"
This Entry and Interior Door System lets the woodworker build doors with true mortise and tenon construction for rock-solid joints that last a lifetime.
Freud 99-269 1-7/8" (Dia.) Entry & Interior Door Router Bit System
Regular price
$203.84
/
FEATURES:
• This Matched Rail and Stile Bit Set comes fully assembled to mill perfect 1-3/4" Rail and Stile joints for exterior doors. To mill 1-3/8" interior door joints, simply remove the spacers from each bit.
• Milling a tenon of virtually any length is easy: the top cutter and bearing of the rail bit is simply unscrewed from the lower cutter and shank, without removing the bit from the router or changing the height of the cutter!
• Cuts all composition materials, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-7/8"
• Bearing Diameter: 7/8"
• Carbide Height: 1-7/8"
• Shank Diameter: 1/2"
• Overall Length: 4-1/8"
This Entry and Interior Door System lets the woodworker build doors with true mortise and tenon construction for rock-solid joints that last a lifetime.
Freud 99-277 1-7/8" (Dia.) Entry & Interior Door Router Bit System
Regular price
$246.53
/
FEATURES:
• This Matched Rail and Stile Bit Set comes fully assembled to mill perfect 1-3/4" Rail and Stile joints for exterior doors. To mill 1-3/8" interior door joints, simply remove the spacers from each bit.
• Milling a tenon of virtually any length is easy: the top cutter and bearing of the rail bit is simply unscrewed from the lower cutter and shank, without removing the bit from the router or changing the height of the cutter!
• Cuts all composition materials, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-7/8"
• Bearing Diameter: 7/8"
• Carbide Height: 2-3/8"
• Shank Diameter: 1/2"
• Overall Length: 4-19/32"
This Entry and Interior Door System lets the woodworker build doors with true mortise and tenon construction for rock-solid joints that last a lifetime.
Freud 99-280 2-3/8" (Dia.) Recoverable Bead Glass Door Bit Sets
Regular price
$128.23
/
FEATURES:
• 99-281 produces an ogee profile, 99-280 produces a quarter round profile, and 99-283 produces a beaded profile.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2-3/8"
• Bearing Diameter: 1-1/4"
• Carbide Height: 7/8"
• Minor Height (m): 1/8"
• Radius: 7/32"
• Shank Diameter: 1/2"
• Overall Length: 3"
Each bit produces a unique profile on the front of the door and a matching profile on the back that can be removed with a 1/8" kerf saw blade, then miter cut to make a bead to secure the glass panel.
Freud 99-281 2-3/8" (Dia.) Recoverable Bead Glass Door Bit Sets
Regular price
$128.23
/
FEATURES:
• 99-281 produces an ogee profile, 99-280 produces a quarter round profile, and 99-283 produces a beaded profile.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2-3/8"
• Bearing Diameter: 1-1/4"
• Carbide Height: 7/8"
• Minor Height (m): 1/8"
• Radius: 7/32"
• Shank Diameter: 1/2"
• Overall Length: 3"
Each bit produces a unique profile on the front of the door and a matching profile on the back that can be removed with a 1/8" kerf saw blade, then miter cut to make a bead to secure the glass panel.
