Freud 64-100 1/4" (Dia.) Solid Carbide Flush Trim Bit
Regular price
$8.97
/
FEATURES:
• Cuts all plastic laminates.
• Use on portable routers and laminate trimmers for trimming plastic laminate.
SPECIFICATIONS:
• Overall Diameter: 1/4"
• Carbide Height: 3/8"
• Shank Diameter: 1/4"
• Overall Length: 1-1/2"
Solid micrograin carbide extends the cutting life and the self-piloting feature eliminates the expense and upkeep of a ball bearing assembly.
FEATURES:
• The 66-100 solid carbide bit creates a 7-degree bevel and includes a self-piloting feature that eliminates the expense and upkeep of a ball bearing assembly.
• Cuts all plastic laminates.
• Use on Hand-held routers, table-mounted portable routers, and laminate trimmers for trimming plastic laminate.
SPECIFICATIONS:
• Overall Diameter: 1/4"
• Bearing Diameter: 3/16"
• Carbide Height: 1/4"
• Angle (d): 7°
• Shank Diameter: 1/4"
• Overall Length: 1-1/2"
The 41 Series Bits provide a range of bevels from 8 degrees to 45 degrees and feature a ball bearing guide.
FEATURES:
• Cuts all plastic laminates.
• Use on hand-held routers, table-mounted portable routers, and laminate trimmers equipped with a guiding system.
SPECIFICATIONS:
• Overall Diameter: 1/4"
• Carbide Height: 3/8"
• Minor Height (m): 11/64"
• Angle (d): 7°
• Shank Diameter: 1/4"
• Overall Length: 1-1/2"
Bit 41-402 is self-guided and comes with two bearings that spread wear evenly on the cutting edge and allow the bit to straight trim or create a 45° bevel.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on portable routers for template work.
SPECIFICATIONS:
• Overall Diameter: 1/4"
• Carbide Height: 1/4"
• Number of Cutters: 1
• Shank Diameter: 1/4"
• Overall Length: 1-5/8"
Freud’s Panel Pilot Bits will outlast high-speed steel bits many times before sharpening. The drill through point allows self-starting, and the pilot acts as a guide for template work.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1/4"
• Carbide Height: 7/32"
• Minor Height (m): 3/64"
• Small Diameter: 3/16"
• Shank Diameter: 1/4"
• Overall Length: 1-1/2"
This solid carbide bit will produce an attractive double "V" to accent furniture, cabinet doors and millwork.
FEATURES:
• Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish
• Enhanced TiCo™ Super Density Carbide with chromium designed and manufactured by Freud for 2x cutting life
• Advanced cutting geometry for superior chip evacuation and finish quality
SPECIFICATIONS:
• Overall Diameter: 3/16"
• Carbide Height: 1/2"
• Number of Cutters: 1
• Shank Diameter: 1/4"
• Overall Length: 1-11/16"
7.5º x 3/16" Engraving V-Groove Solid Carbide Bit. 1/2" Cutting Length. 1/4" Shank. Perfect for engraving and lettering applications in hard or soft wood, or composite materials. Ideal for Wood, Wood Composites, Plastics (Hard & Soft), and Aluminum for 2D and 3D Carving.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 25/64"
• Carbide Height: 7/16"
• Minor Height (m): 1/4"
• Small Diameter: 3/16"
• Shank Diameter: 1/4"
• Overall Length: 1-5/8"
The large diameter end bores holes to allow nail or screw heads to enter the slot, and the smaller diameter allows room for the shank of the nail or screw.
FEATURES:
• Freud's solid carbide O-flutes are "mirror" polished, reducing heat to give the ultimate in life with less welding or recutting of chips.
• Provides a clean ultra smooth, ready to use finished edge.
• Ecellent for detail work in all composite, plastic, hard and soft materials.
• For use on "table top"/ portable CNC, mid size and large CNC machines and hand held routers.
SPECIFICATIONS:
• Overall Diameter: 1/8"
• Carbide Height: 1/2"
• Number of Cutters: 1
• Shank Diameter: 1/4"
• Overall Length: 2"
Designed for small and large CNC machines for graphics, sign making, intricate detail work, and cutting out material where a smooth finish is required on the finished edge.
FEATURES:
• Freud's solid carbide O-flutes are "mirror" polished, reducing heat to give the ultimate in life with less welding or recutting of chips.
• Provides a clean ultra smooth, ready to use finished edge.
• Ecellent for detail work in all composite, plastic, hard and soft materials.
• For use on "table top"/ portable CNC, mid size and large CNC machines and hand held routers.
SPECIFICATIONS:
• Overall Diameter: 3/16"
• Carbide Height: 3/4"
• Number of Cutters: 1
• Shank Diameter: 1/4"
• Overall Length: 2"
Designed for small and large CNC machines for graphics, sign making, intricate detail work, and cutting out material where a smooth finish is required on the finished edge.
FEATURES:
• Freud's solid carbide O-flutes are "mirror" polished, reducing heat to give the ultimate in life with less welding or recutting of chips.
• Provides a clean ultra smooth, ready to use finished edge.
• Ecellent for detail work in all composite, plastic, hard and soft materials.
• For use on "table top"/ portable CNC, mid size and large CNC machines and hand held routers.
SPECIFICATIONS:
• Overall Diameter: 1/4"
• Carbide Height: 3/4"
• Number of Cutters: 1
• Shank Diameter: 1/4"
• Overall Length: 2-1/2"
Designed for small and large CNC machines for graphics, sign making, intricate detail work, and cutting out material where a smooth finish is required on the finished edge.
FEATURES:
• Freud's solid carbide O-flutes are "mirror" polished, reducing heat to give the ultimate in life with less welding or recutting of chips.
• Provides a clean ultra smooth, ready to use finished edge.
• Ecellent for detail work in all composite, plastic, hard and soft materials.
• For use on "table top"/ portable CNC, mid size and large CNC machines and hand held routers.
SPECIFICATIONS:
• Overall Diameter: 5/16"
• Carbide Height: 13/16"
• Number of Cutters: 1
• Shank Diameter: 1/4"
• Overall Length: 2-1/2"
Designed for small and large CNC machines for graphics, sign making, intricate detail work, and cutting out material where a smooth finish is required on the finished edge.
FEATURES:
• Freud's solid carbide O-flutes are "mirror" polished, reducing heat to give the ultimate in life with less welding or recutting of chips.
• Provides a clean ultra smooth, ready to use finished edge.
• Ecellent for detail work in all composite, plastic, hard and soft materials.
• For use on "table top"/ portable CNC, mid size and large CNC machines and hand held routers.
SPECIFICATIONS:
• Overall Diameter: 3/8"
• Carbide Height: 7/8"
• Number of Cutters: 1
• Shank Diameter: 1/4"
• Overall Length: 2-1/2"
Designed for small and large CNC machines for graphics, sign making, intricate detail work, and cutting out material where a smooth finish is required on the finished edge.
FEATURES:
• Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish
• Enhanced TiCo™ Super Density Carbide with chromium designed and manufactured by Freud for 2x cutting life
• Advanced cutting geometry for superior chip evacuation and finish quality
SPECIFICATIONS:
• Overall Diameter: 1/4"
• Carbide Height: 1/2"
• Number of Cutters: 2
• Radius: 1/8"
• Shank Diameter: 1/4"
• Overall Length: 2-1/2"
1/2" Up Cut Spiral Ball Nose Solid Carbide Bit. Includes 2 flutes and 1/4" diameter. 1/4" Shank. Freud Solid Carbide Ball Nose Bits are ideal for routing plastics, composites, wood or solid surface materials. Use for grooving or edge work. Ideal for Wood, Wood Composites, Plastics (Hard & Soft), and Aluminum for 2D and 3D Carving.
