Freud 50-101 1/2" (Dia.) Top Bearing Flush Trim Bit
Regular price
$23.73
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1/2"
• Bearing Diameter: 1/2"
• Carbide Height: 1-1/4"
• Shank Diameter: 1/4"
• Overall Length: 2-1/2"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-102 1/2" (Dia.) Top Bearing Flush Trim Bit
Regular price
$19.38
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1/2"
• Bearing Diameter: 1/2"
• Carbide Height: 1"
• Shank Diameter: 1/4"
• Overall Length: 2-5/8"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-103 5/8" (Dia.) Top Bearing Flush Trim Bit
Regular price
$19.69
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 5/8"
• Bearing Diameter: 5/8"
• Carbide Height: 9/16"
• Shank Diameter: 1/4"
• Overall Length: 2-1/4"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-104 5/8" (Dia.) Top Bearing Flush Trim Bit
Regular price
$20.11
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 5/8"
• Bearing Diameter: 5/8"
• Carbide Height: 1"
• Shank Diameter: 1/4"
• Overall Length: 2-5/8"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-105 9/16" (Dia.) Top Bearing Flush Trim Bit
Regular price
$23.67
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 9/16"
• Bearing Diameter: 9/16"
• Carbide Height: 3/4"
• Shank Diameter: 1/4"
• Overall Length: 2-5/16"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-106 3/4" (Dia.) Top Bearing Flush Trim Bit
Regular price
$21.00
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 3/4"
• Bearing Diameter: 3/4"
• Carbide Height: 1"
• Shank Diameter: 1/4"
• Overall Length: 2-5/8"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-107 9/16" (Dia.) Top Bearing Flush Trim Bit
Regular price
$20.71
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 9/16"
• Bearing Diameter: 5/8"
• Carbide Height: 9/16"
• Shank Diameter: 1/4"
• Overall Length: 2-5/16"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-110 7/8" (Dia.) Top Bearing Flush Trim Bit
Regular price
$35.51
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 7/8"
• Bearing Diameter: 7/8"
• Carbide Height: 1"
• Shank Diameter: 1/2"
• Overall Length: 2-13/16"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1"
• Bearing Diameter: 1"
• Carbide Height: 1"
• Shank Diameter: 1/2"
• Overall Length: 2-3/4"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-116 3/4" (Dia.) Top Bearing Flush Trim Bit
Regular price
$26.92
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 3/4"
• Bearing Diameter: 3/4"
• Carbide Height: 1"
• Shank Diameter: 1/2"
• Overall Length: 2-13/16"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-118 3/4" (Dia.) Top Bearing Flush Trim Bit
Regular price
$33.67
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 3/4"
• Bearing Diameter: 3/4"
• Carbide Height: 1-3/4"
• Shank Diameter: 1/2"
• Overall Length: 3-1/2"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-122 1-1/8" (Dia.) Top Bearing Flush Trim Bit
Regular price
$44.35
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-1/8"
• Bearing Diameter: 1-1/8"
• Carbide Height: 1-1/2"
• Shank Diameter: 1/2"
• Overall Length: 3-3/8"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-126 1-1/4" (Dia.) Top Bearing Flush Trim Bit
Regular price
$45.39
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-1/4"
• Bearing Diameter: 1-1/4"
• Carbide Height: 1-1/2"
• Shank Diameter: 1/2"
• Overall Length: 3-3/8"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-130 1-1/2" (Dia.) Top Bearing Flush Trim Bit
Regular price
$53.45
/
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2"
• Bearing Diameter: 2"
• Carbide Height: 2"
• Shank Diameter: 1/2"
• Overall Length: 4"
The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out.
Freud 50-501 1/2" (Dia.) Top & Bottom Bearing Flush Trim Bit
Regular price
$27.42
/
FEATURES:
• Freud’s Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern.
• Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects.
• Cuts all hardwoods, softwoods, plastic laminates and veneered plywood.
• Use on hand-held routers, laminate trimmers, and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1/2"
• Bearing Diameter: 1/2"
• Carbide Height: 1-1/4"
• Shank Diameter: 1/4"
• Overall Length: 3-5/16"
Double bearing design allows you to choose the cutting direction that best suits your work piece.
Freud 50-509 3/4" (Dia.) Top & Bottom Bearing Flush Trim Bit
Regular price
$36.30
/
FEATURES:
• Freud’s Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern.
• Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects.
• Cuts all hardwoods, softwoods, plastic laminates and veneered plywood.
• Use on hand-held routers, laminate trimmers, and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 3/4"
• Bearing Diameter: 3/4"
• Carbide Height: 1-5/8"
• Shank Diameter: 1/2"
• Overall Length: 3-7/8"
Double bearing design allows you to choose the cutting direction that best suits your work piece.
FEATURES:
• Replacement cutter for #99-039.
• Allows you complete freedom when producing finger joints.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2"
• Carbide Height: 7/32"
• Cut Depth: 5/16"
• Number of Cutters: 2
• Bore Diameter: 5/16"
Ideal for joining wood edge-to-edge or end-to-end, because the joint produced is stronger than the wood itself.
FEATURES:
• Replacement cutter for #99-039.
• Allows you complete freedom when producing finger joints.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2"
• Carbide Height: 21/64"
• Cut Depth: 5/16"
• Number of Cutters: 2
• Bore Diameter: 5/16"
Ideal for joining wood edge-to-edge or end-to-end, because the joint produced is stronger than the wood itself.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-1/8"
• Carbide Height: 13/16"
• Minor Height (m): 5/16"
• Small Diameter: 3/8"
• Shank Diameter: 1/2"
• Overall Length: 2-1/2"
Build your own sturdy, attractive, slotted wall to display items from garden tools and power tools to toys – hanging by a hook.
FEATURES:
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 1-3/8"
• Carbide Height: 7/8"
• Minor Height (m): 3/8"
• Small Diameter: 1/2"
• Shank Diameter: 1/2"
• Overall Length: 2-1/2"
Build your own sturdy, attractive, slotted wall to display items from garden tools and power tools to toys – hanging by a hook.
FEATURES:
• Cutter fits Freud's slotting cutter arbor #60-202.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2"
• Carbide Height: 1/8"
• Number of Cutters: 2
By changing the bearings with this cutter three different depths (1/4", 3/8", 1/2") can be made.
Freud 54-760 Glass/Screen Panel Door Add-on Cutter
Regular price
$32.49
/
FEATURES:
• Unique cutter geometry to eliminate tearout.
• Patented Extended Tenon Capability - Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile.
• TiCo™ Hi-Density Carbide to maximize bit life and material finish.
• Perma-SHIELD coating reduces heat & pitch build-up from rust
SPECIFICATIONS:
• Overall Diameter: 1-11/16"
Adjustable shims adjust panel groove down to 7/32"(5.5mm) and up to 3/8" (9.5mm) thick, ideal for plywood panels.
Freud 56-100 1/16" Slot Three Wing Slotting Cutter
Regular price
$14.39
/
FEATURES:
• Compatible with 62-108 bearing.
• Cutter 56-109 can be used for biscuit joining.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
SPECIFICATIONS:
• Overall Diameter: 2"
• Carbide Height: 1/16"
• Cut Depth: 9/16" Max
• Number of Cutters: 3
• Bore Diameter: 5/16"
Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and 60-102 for 1/2" shanks.
