Products

INCLUDES: • (1) Test Lead Accessory Bus Bar Clip FEATURES: • One pair (red, black) of flat, right angle design for connecting to bus bars • Adjustable collar provides 2 ranges of jaw openings up to 30 mm SPECIFICATIONS: • Unit Weight (KG): 0.11 • Unit Height (CM): 3 • Unit Length (CM): 30.3 • Unit Width (CM): 10.2 • CAT III 600 V, 5 A rating. UL listed AC87 Heavy Duty Bus Bar Clip Set.

INCLUDES: • (1) Insulation Piercing Clip FEATURES: • Single probe pierces 0.25 to 1.5 mm insulated wire • Small pin allows self-healing of the insulation • CAT IV 600 V, CAT III 1000 V, 5 A rating. UL Listed SPECIFICATIONS: • Unit Weight (KG): 0.06 • Unit Height (CM):3.5 • Unit Length (CM): 30.3 • Unit Width (CM): 10 Heavy duty, insulation-piercing test clip with insulation jaws made of stainless steel tip that pierces insulated wires for otherwise inaccessible test points.

Show 12 products per page Show 24 products per page Show 48 products per page Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity

INCLUDES: • (1) Probe Accessory Set FEATURES: • Accessory type: Probe accessories extension set • For use with: Fluke 190 Series II ScopeMeter SPECIFICATIONS: • Unit Weight (KG): 0.12 • Unit Height (CM): 3.5 • Unit Length (CM): 19 • Unit Width (CM): 11.5 Fluke - AS400 - Probe Accessory Set.

Show 12 products per page Show 24 products per page Show 48 products per page Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity

Show 12 products per page Show 24 products per page Show 48 products per page Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity

Show 12 products per page Show 24 products per page Show 48 products per page Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity

Show 12 products per page Show 24 products per page Show 48 products per page Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity

INCLUDES: • (1) Set of 2 Banana To BNC Adaptor FEATURES: • To be used on the 120 Series ScopeMeters • 2 per package SPECIFICATIONS: • Unit Weight (KG): 0.054 • Unit Height (CM):6.5 • Unit Length (CM): 13.5 • Unit Width (CM): 9 • Maximum Signal Voltage: 300 V rms CAT III per IEC 1010-02-031 Safety designed female BNC to Shielded Banana Adapter for use with Fluke ScopeMeter 120 Series and 43B Power Quality Analyzer.

INCLUDES: • (1) Battery Charger, NiMH FEATURES: • Power supply: 3.9 inch x 2.6 inch x 1.6 inch (100 mm x 66 mm x 41 mm; 72 inch (1.8m) cord • 4.6 inch x 4.1 inch x 2.7 inch (116 mm x 104 mm x 58 mm) • 1.7 lb/0.78 kg • Battery charger base, power supply (plus line cord for INTL version) SPECIFICATIONS: • Unit Weight (KG): 1.045 • Unit Height (CM): 11.4 • Unit Length (CM): 21.6 • Unit Width (CM): 11.4 • Line voltage: 100 - 250 V ac • Frequency: 50 - 60 Hz BC7217 Battery charger UL, CSA, MITI, DEMKO, FINKO, SEMKO recognized. CE compliant. EMI per FCC part 15 Class B.

Show 12 products per page Show 24 products per page Show 48 products per page Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity

INCLUDES: • (1) Battery Pack, Li Ion 3.7 2500Mah FEATURES: • Charging time < 6 hours • On-Battery runtime: four hours in standard operating mode, up to 5.5 hours in power saving mode SPECIFICATIONS: • Unit Weight (KG): 0.129 • Unit Height (CM): 4 • Unit Length (CM): 12 • Unit Width (CM): 7.5 Li ion Battery pack 3.7V 2500 mAh.

INCLUDES: • (1) NiMH Battery Pack FEATURES: • Spare Battery for the Fluke ScopeMeter 190 and 190C Series, as well as in the Fluke 430 Series. • The battery pack has to be charged in the instrument. SPECIFICATIONS: • Unit Weight (KG): 0.38 • Unit Height (CM): 8.1 • Unit Length (CM): 20.2 • Unit Width (CM): 7.7 • Nominal voltage: 7.2 V • Capacity: 3,500 mAh BP190 Rechargeable NiMH Battery Pack. Set of NiMH batteries designed for use with Fluke ScopeMeter 190 and 190C Series, as well as in the Fluke 430 Series.

INCLUDES: • (1) Li-Ion Battery Pack, Double Capacity, Fluke 190-Seriesii FEATURES: • For use with 190-II Series • 4800 mAh SPECIFICATIONS: • Unit Weight (KG): 0.46 • Unit Height (CM): 6.4 • Unit Length (CM): 24 • Unit Width (CM): 15.9 • Battery capacity: 4.8 Ah • Battery technology: lithium ion Fluke - BP291 - Li-Ion Battery Pack, 4.8 Ah.

INCLUDES: • (1) Fluke BP500 Lithium-ion Battery 3000 mAh FEATURES: • Li-Ion Battery for Fluke Battery Analyzers • Highly Reliable • Status Indicator Light Replacement or spare high-capacity 7.4 V 3000MAH Li-ion battery for Fluke 500 Series Battery Analyzers.

INCLUDES: • (1) NiMH Battery Pack FEATURES: • Provides typical 16-hour Battery life when used in 700 or 740 calibrator • Six 1.2 V dc Ni-MH cells in custom-molded ABS/PC-blend case • One Battery pack SPECIFICATIONS: • Unit Weight (KG): 0.375 • Unit Height (CM): 2.3 • Unit Length (CM): 15.8 • Unit Width (CM): 5.9 7.2V 3500 mA-hour rechargeable Ni-MH Battery pack.

INCLUDES: • (1) BNC Female To Double Stacking Banana Plug FEATURES: • Allows for hands-free testing in controlled voltage envIRonments 500 VRMS maximum • Banana plug is nickel-plated, beryllium copper for low contact resistance • The BNC shell is plated for tarnish resistance SPECIFICATIONS: • Unit Weight (KG): 0.02 • Unit Height (CM): 2.5 • Unit Length (CM): 16.5 • Unit Width (CM): 10.2 Converts a BNC scope lead to a dual banana plug for connection to a DMM. RequIRed when adapting a shielded BNC cable, found on high-end low current clamps such as the Fluke 80i-110s, to a DMM.

INCLUDES: • (1) BNC Male To Double Stacking Banana Plug FEATURES: • Allows for hands-free testing in controlled voltage envIRonments 500 VRMS maximum • Banana plug is nickel-plated, beryllium copper for low contact resistance • The BNC shell is plated for tarnish resistance SPECIFICATIONS: • Unit Weight (KG): 0.035 • Unit Height (CM): 1.5 • Unit Length (CM): 16.5 • Unit Width (CM): 10.2 Designed to easily connect your DMM to a BNC patch cord. Use this adapter when connecting accessories that have a male BNC output.

INCLUDES: • (5) Double Banana Plugs, 4mm (Red) • (5) Double 4mm Banana Plugs (Black) FEATURES: • 5 pair (red, black) of double 4 mm banana plugs • Each plug has 3.1 mm holes for mounting wires and components • Brass plugs/jack, beryllium copper springs SPECIFICATIONS: • Unit Weight (KG): 0.155 • Unit Height (CM): 3 • Unit Length (CM): 11 • Unit Width (CM): 22.5 BP980 Double Banana Plug Kit.

INCLUDES: • (1) Battery analyzer • (4) Wire test pin (set) • (1) BTL10 Basic Test Lead (set) • (1) TL175 TwistGuard™ Test Leads with adapter • (1) BP500 lithium-ion battery • (1) BC500 AC charger • (1) Mini-USB cable • (1) Shoulder strap • (1) Belt strap • (1) Magnetic hanging strap • (1) FlukeView® Battery Management Software • (1) Soft carrying case • (2) Spare fuses • (1) Zero Ohm Calibration Resistor FEATURES: • Battery Voltage – During the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under test • Discharge Volts – The Discharge mode collects the voltage of each battery multiple times at a user defined interval during a discharge or load test. Users can calculate the time a battery takes to drop to the cut-off voltage and use this time to determine the capacity loss of the battery • Ripple Voltage Test – Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits. Allows users to test ac components in dc charging circuits and find one of the root causes of battery deterioration • Meter and Sequence Modes – The Meter mode is used for a quick test or troubleshooting. In this mode you can save and read the readings in a measurement or time sequence. The Sequence mode is for maintenance tasks with multiple power systems and battery strings. Before a task starts, users can configure a profile for the task for data management and report generation • Threshold and Warning – Users can configure a maximum of 10 sets of thresholds and receive a Pass/ Warning/ Fail indication after each measurement • Intercell Strap Resistance Test and Data Management – Measures the resistance of the intercell connection between batteries in a string. Once the measurements are completed Fluke Battery Management Software version 1.0.69 can now report the strap resistance for a battery string or historical data over time. • AutoHold – When AutoHold is turned on, a reading is captured when it remains stable for 1 second. The reading is then released when a new measurement starts • AutoSave – When AutoSave is turned on, measured values are saved to internal memory automatically after an AutoHold reading is captured • Fluke Battery Management Software – Easily import data from the Product to a PC. The measurement data and battery profile information is stored and archived with the Management Software and can be used for comparison and trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reports • Comprehensive logging – All measured values are automatically captured during testing and can be reviewed on the instrument before downloading for on the-go analysis • Optimized user interface – Quick, guided setup ensures you're capturing the right data every time • Battery life – 7.4 V 3000 mAh lithium-ion battery for more than eight hours continuous operation. • USB port – For fast data download to supplied data analysis and report management application software. • Highest safety rating in the industry – CAT III 600 V, 1000 V dc max. rated for safe measurements all around the battery power supply equipment. • The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications • The intuitive user interface, compact design and rugged construction ensure optimum performance, test results and reliability • Covers a broad range of battery test functions ranging from DC voltage and resistance tests to full condition testing using automated string function testing and the test probe integrated infra-red temperature measurement system • Designed for measurements on stationary batteries of all types. SPECIFICATIONS: • Dimensions H x W x D: 9" x 4" x 2" • Screen dimensions: 3" x 2.2" • Interface: USB mini • Warranty: 3 years • Operating temperature: 0°C to 40°C • Storage temperature: -20°C to 50°C • Lithium-ion battery charging temperature: 0°C to 40°C • Operating humidity: Non-condensing (10°C); ≤ 80% RH (at 10°C to 30°C); ≤ 75% RH (at 30°C to 40°C) • Operating altitude: Sea level to 2000 meters • Storage altitude: Sea level to 12,000 meters • IP rating: IP40 • Radio: FCC Class A • Vibration requirements: MIL-PRF-28800F: Class 2 • Drop test requirements: 1 meter • Temperature coefficients: Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C • Safety compliance: 600 V CAT III • EMC: IEC 61326 • Protection class 2: Pollution Degree II • Battery compliance: UN38.3; UL2054; IEC62133; 2 G per IEC68-2-26, 25 G, and 29 Reduced testing complexity, a simplified workflow and an intuitive user interface provide a new level of ease-of-use in battery testing.

INCLUDES: • (1) Battery analyzer • (4) Wire test pin (set) • (1) BTL10 Basic Test Lead (set) • (1) TL175 TwistGuard™ Test Leads with adapter • (1) BTL20 Intelligent Test Probe Set, with extender (no temperature sensor) • (1) BP500 lithium-ion battery • (1) BC500 AC charger • (1) Mini-USB cable • (1) Shoulder strap • (1) Belt strap • (1) Magnetic hanging strap • (1) FlukeView® Battery Management Software • (1) Soft carrying case • (2) Spare fuses • Battery tags and Zero Ohm Calibration Resistor FEATURES: • All of the above plus • BTL20 Interactive Test Probe set, with long and short probe extenders and built-in LCD display and speaker for visual and audio feedback • Large soft carry case SPECIFICATIONS: • Dimensions H x W x D: 9" x 4" x 2" • Screen dimensions: 3" x 2.2" • Interface: USB mini • Warranty: 3 years • Operating temperature: 0°C to 40°C • Storage temperature: -20°C to 50°C • Lithium-ion battery charging temperature: 0°C to 40°C • Operating humidity: Non-condensing (10°C); ≤ 80% RH (at 10°C to 30°C); ? 75% RH (at 30°C to 40°C) • Operating altitude: Sea level to 2000 meters • Storage altitude: Sea level to 12,000 meters • IP rating: IP40 • Radio: FCC Class A • Vibration requirements: MIL-PRF-28800F: Class 2 • Drop test requirements: 1 meter • Temperature coefficients: Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C • Safety compliance: 600 V CAT III • EMC: IEC 61326 • Protection class 2: Pollution Degree II • Battery compliance: UN38.3; UL2054; IEC62133; 2 G per IEC68-2-26, 25 G, and 29 Reduced testing complexity, a simplified workflow and an intuitive user interface provide a new level of ease-of-use in battery testing.

INCLUDES: • (1) Battery analyzer • (1) 4-wire test pin (set) • (1) BTL10 Basic Test Lead (set) • (1) TL175 TwistGuard™ Test Leads with adapter • (1) BTL21 Intelligent Test Probe Set, with extender and temperature sensor • (1) i410 AC/DC Current Clamp • (1) BP500 lithium-ion battery • (1) BC500 AC charger • (1) mini-USB cable • (1) Shoulder strap • (1) Belt strap • (1) Magnetic hanging strap • (1) FlukeView® Battery Management Software • (1) Soft carrying case • (2) Spare fuses • (1) Battery tags • (1) Zero Ohm Calibration Resistor FEATURES: • The ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications • The intuitive user interface, compact design and rugged construction ensure optimum performance, test results and reliability • Covers a broad range of battery test functions ranging from DC voltage and resistance tests to full condition testing using automated string function testing and the test probe integrated infra-red temperature measurement system • Designed for measurements on stationary batteries of all types. SPECIFICATIONS: • Battery Type: Li-ion • Product Height: 9 IN • Product Length: 4 IN • Product Width: 2 IN Fluke Battery Analzyer has reduced testing complexity, a simplified workflow and an intuitive user interface provide a new level of ease-of-use in battery testing. It's the ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications (UPS). The intuitive user interface, compact design and rugged construction ensure optimum performance, test results and reliability. Fluke 500 series battery analyzer covers a broad range of battery test functions ranging from DC voltage and resistance tests to full condition testing using automated string function testing and the test probe integrated infra-red temperature measurement system. it's designed for measurements on stationary batteries of all types.

INCLUDES: • (1) Voltage/Current Probe Adapter FEATURES: • Probe Adapter for Fluke Battery Analyzer • Highly Reliable SPECIFICATIONS: • Color: Yellow Voltage/current probe adapter for Fluke 500 Series Battery Analyzers. The BTL-A allows connection of standard 4mm banana plug test leads or current clamp adapter. Allows the BT521 Series Battery Analyzer to make AC and DC voltage and current measurements using the Fluke i410 AC/DC Current Clamp.