Products

Fluke 370 FC Series Data Sheet INCLUDES: • (1) 1000A AC/DC TRMS wireless Clamp W/ Iflex • (1) Test Lead Set (TL75) • (1) 18 in. iFlex Flexible Current Probe • (1) Magnetic Hanging Strap (TPAK) • (2) AA Batteries • (1) Soft Carrying Case • (1) User Manual FEATURES: • Connect your meter to your smartphone with Fluke Connect Measurements • Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks • Record results dIRectly to your phone and the cloud SPECIFICATIONS: • Unit Weight (KG): 1.007 • Unit Height (CM): 9.5 • Unit Length (CM): 27 • Unit Width (CM): 13 • Maximum voltage between any terminal and earth ground: 1000 V • Batteries: 2 AA, NEDA 15A, IEC LR6 • Operating temperature: -10 °C to +50 °C • Storage temperature: -40 °C to +60 °C • Size (L x W x H): 249 x 85 x 45 mm • Weight: 395 g • Jaw opening: 34 mm • Flexible current probe diameter: 7.5 mm You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes. The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.

Details Fluke 370 FC Series Data Sheet INCLUDES: • Soft carrying case • TL75 test leads • Two AA Alkaline batteries • Coated instruction card • Safety information sheet FEATURES: • Voltteat™ technology and continuous self-test – so you always know it's working • Upon detection, tip glows and beeper sounds • CAT IV 1000 V for added protection • Expanded range: 90 V AC to 1000 V AC • 20 V to 90 V AC control circuit model also available • Two-year warranty • Batteries included • On/Off Button • Audible/Silent SPECIFICATIONS: • Operating temperature: -10 to 50 C • Size: 249 x 85 x 45 mm • Weight: 395 g • Jaw opening: 34 mm • Flexible current probe cable length: 1.8 m High-performance clamp meter with wireless communication, measures very low voltage and very high resistance, plus a VFD low-pass filter for accurate motor drive measurements.

INCLUDES: • Thermal imager • AC charger/power supply with mains adapters for battery charging and AC operation • One rugged lithium ion smart battery • Soft transport bag • Statement of factory calibration • Quick start guide • Safety sheet FEATURES: • Quickly scan large areas with point and shoot simplicity • Quality images - 120x90 resolution (10,800 pixels) • D:S of 193:1 • Find problems fast with the exclusive IR-Fusion® Blending mode • 3.5 inch, 320x240 LCD • 5 megapixel digital camera • Smart battery system – lithium ion smart battery with five-segment LED charge level display • Email and share images in real time with Fluke Connect® • Stores thousands of images – 4 GB internal memory and optional 4 GB micro SD card SPECIFICATIONS: • IFOV (spatial resolution): 5.2 mRad • Detector resolution: 120x90 • Field of view 35.7 ° x 26.8 ° • Distance to spot 193:1 • Wireless connectivity • Fluke Connect® app compatible • AutoBlend™ mode: 3 presets (0%, 50%, 100%) • Focus system: Fixed focus, Minimum focus distance 0.45 m (1.5 ft) • Ruggedized display: 3.5 inch (landscape) 320x240 LCD • Rugged, ergonomic design for one-handed use • Thermal sensitivity (NETD): ≤0.10 °C at 30 °C target temp (100 mK) • Temperature measurement range (not calibrated below -10 °C): -20 °C to +350 °C (–4 °F to 662 °F) • Level and span: Smooth auto and manual scaling • Fast auto toggle between manual and auto modes • Fast auto-rescale in manual mode • Minimum span (manual mode): 2.5 °C • Minimum span (auto mode): 5 °C • Built-in digital camera (visible light): 5 MP Affordable, fixed focus infrared camera with 120x90 resolution and three presets of IR-Fusion® with AutoBlend, making documenting problems quick and easy.

INCLUDES: • Thermal imager with standard infrared lens • AC power supply and battery pack charger (including universal AC adapters) • Two, rugged lithium ion smart battery packs • USB cable • HDMI video cable • 4 GB micro SD card • Rugged, hard carrying case • Soft transport bag • Adjustable hand strap FEATURES: • Capture a clear, accurate image focused throughout the field of view with MultiSharp™ Focus. Simply point and shoot — the camera automatically processes a stack of images focused near and far • Get an instant in-focus image of your designated target. LaserSharp® Auto Focus, exclusive to Fluke, uses a built-in laser distance meter that calculates and displays the distance from your designated target with pinpoint accuracy • Get 4x the pixel data with SuperResolution, which captures multiple images and combines them to create a 640 x 480 image • Save time – wirelessly sync images directly from your camera to the Fluke Connect® system, and attach to an asset record or work order • Get the context of the visual and infrared details all in one precisely blended or picture-in-picture image with IR-Fusion® technology • Monitor processes with video recording, video streaming, and remote control • See the details you need with interchangeable smart lenses – 2x and 4x telephoto and wide angle – no calibration required SPECIFICATIONS: • IFOV with standard lens (spatial resolution): 1.31 mRad, D:S 753:1 • Detector resolution 320 x 240 (76,800 pixels) — or 640 x 480 with SuperResolution • SuperResolution: Yes, on camera and in software. Captures and combines 4x the data to create a 640 x 480 image • MultiSharp™ Focus: Yes, focused near and far, throughout the field of view • LaserSharp® Auto Focus: Yes, for consistently in-focus images. Every. Single. Time. • Laser distance meter: Yes, calculates distance to the target for precisely focused images and displays distance on screen • Advanced manual focus • Ruggedized touchscreen display: 3.5 inch (landscape) 640 x 480 LCD • Rugged, ergonomic design for one-handed use • Digital zoom: 2x and 4x • Temperature measurement range (not calibrated below -10 °C): -20 °C to +1200 °C (-4 °F to +2192 °F) • Accuracy ±2 °C or 2% (at 25 °C nominal, whichever is greater) • Thermal sensitivity (NETD):* ≤0.03 °C at 30 °C target temp (30 mK) • On-screen emissivity correction: Yes (both value and table) • On-screen reflected background temperature compensation • On-screen transmission correction The Fluke Ti450 Thermal Imager with MultiSharp™ Focus delivers focus near and far in one image. Stop worrying about focus; simply point and shoot.

INCLUDES: • Multifunction IR Thermometer 20:1 D:S FEATURES: • Temperature accuracy of up to ± 1°C or ± 1% of reading whichever is greater with 20:1 distance to spot ratio • Flashlight and large, easy-to-read backlit LCD display for easy viewing even in dark environment • IP54 rated for extra protection against airborne contaminants • Get your tool to work when you can't - set time and desired interval between measurements and Auto Capture will capture spot temperatures unattended • 99 data point logging • 30 hour battery life so your tool can perform as long as you need it to • Displays the minimum, maximum or average temperature, or the difference between two measurements • Hi and Lo alarms for rapid display of measurements outside set limits • Small and lightweight design fits easily into your tool box • Powered by one (1) AA alkaline battery SPECIFICATIONS: • Temperature Range: -30 °C to 600 °C (-22 °F to 1112 °F) • Accuracy (Calibration geometry with ambient temperature 23 °C +/- 2 °C: ± 1.0 °C or ± 1.0 % of reading, whichever is greater, ± 2.0 °C at -10 °C to 0 °C, ± 3.0 °C at -30 °C to -10 °C • Optical Resolution: 20 : 1 (calculated at 90 % energy) • Response Time: (95 %) < 500 ms (95% of reading) • Spectral Response: 8 to 14 microns • Emissivity: 0.10 to 1.00 • Display Resolution: 0.1 °C (0.2 °F) • Repeatability (% of reading): ± 0.5% of reading or ± 0.5 °C (whichever is greater) • Auto Capture: Set time and interval to capture up to 99 measurements • Internal memory: 99 data point logging capability • Flashlight: Yes • Power: 1 AA battery • Battery life: 30 hours with laser and backlight on • Weight: 255 g (8.99 oz) • Size: (175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches • Operating Temperature: 0 °C to 50 °C (32 °F to 122 °F) • Storage Temperature: -20 °C to 60 °C (-4 °F to 140 °F) (without battery) • Operating Humidity: Non- condensing @ ≤ 10 °C (50 °F), ≤ 90 % RH @ 10 °C (50 °F) to 30 °C (86 °F), ≤ 75 %, RH @ 30 °C (86 °F) to 40 °C (104 °F), ≤ 45 % RH @ 40 °C 104 °F to 50 °C (122 °F) • Laser Safety: IEC 60825-1 Class 2, 650 nm, < 1 mW • Warranty: 3 years Unattended monitoring, 99 data point memory, flashlight, 30 hour battery life, IP54 and 3 meter drop test

INCLUDES: • (1) Power Quality Window Kit FEATURES: • Reduced risk — Permanently installed voltage and current connections can be accessed without opening the panel door • Increased efficiency — Quickly connect your logger or analyzer and begin taking measurements faster than ever • Easy installation — A standard step drill bit and electro-hydraulic hole punch provide the simple means to quickly mount the window in the panel The Fluke PQ400 Electrical Measurement Window enables the connection of three phase measurement equipment to energised panels, without the need to open the panel door, or wear supplemental personal protective equipment (PPE). The PQ400 gives you access to the critical power quality and energy data you need, all while decreasing testing time and helping you to maintain safety.

INCLUDES: • (1) Cable Marker Set, 3P+N+PE FEATURES: • General purpose cable marker set • With 3PH+N+PE markers For use with Fluke power and energy loggers, or other three-phase products with cable diameters of 3-5mm

INCLUDES: • (1) Insulated Phillips Screwdriver, #1, 3" 1000V FEATURES: • Long nose pliers with side cutter and gripping zones • Four gripping points for pulling round objects with superior grip that won't slip; unique milled wave pattern gripping zones • Side cutting edge for wire cutting • German chromium-molybdenum-vanadium steel • Straight, half-round, long and slim knurled jaws, specially profiled • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Nominal length: 8" (200mm) The Fluke INLP8 Insulated Long Nose Pliers with Side Cutter, 8 in., 200 mm, 1000 V will always feel right. From the moment you first put this tool in your hand, you're ready to go to work. The pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated High Leverage Diagonal Cutter, 8" 1000V FEATURES: • Heavy duty, high leverage diagonal cutter • Cuts hard materials including steel and piano wire • Power joint and precision cutting edges • Forged from German chromium-molybdenum-vanadium steel • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Nominal length: 8" (200mm) The Fluke INDC8 Insulated High Leverage Diagonal Cutter, 8 in., 200 mm, 1000 V will always feel right. From the moment you first put this tool in your hand, you're ready to go to work. The pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Pump Pliers, Fast Adjustable, 10" 1000V FEATURES: • More gripping strength and comfort compared to conventional pump pliers of the same length • Jaw adjustment with 27 steps for more accurate gripping, less slippage; self-locking on pipes and nuts • Improved access in tight spaces due to slim head and joint • Pinch guard prevents operators´ fingers being pinched, box-joint design; high stability because of double guide • Gripping surfaces with teeth hardened to HRC61 for low wear and reliable gripping • Box-joint design and high stability because of double guide • Self-locking on pipes and nuts: no slipping on workpiece with low hand force required • German CMV steel, forged, multi stage oil-hardened • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Nominal length: 10" (250mm) The Fluke INPP10 Insulated Pump Pliers, Fast Adjustable, 10 in., 250 mm, 1000 V will always feel right. From the moment you first put it in your hand, you're ready to go to work. The pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Lineman's Combination Pliers, 8" 1000V FEATURES: • Heavy duty lineman combination pliers, with slim shape for better access to wires in tight spaces • Secure hold by aggressive serrated jaws and 4-point gripping hole • Powerful gripping jaw, yet 20% lighter weight than other designs • Forged from German chromium-molybdenum-vanadium steel • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Nominal length: 8" (200mm) The Fluke INCP8 Insulated Lineman's Combination Pliers, 8 in., 200 mm, 1000 V will always feel right. From the moment you first put this tool in your hand, you're ready to go to work. The pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Slotted Screwdriver, 3/32 x 3" 1000V FEATURES: • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design • Slim insulated shaft allows access in hard to reach areas • Forged from German CMV steel for superior durability • Manufactured from CMV steel for superior durability • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Blade length: 3" (75mm) • Handle length: 3 3/8" (86 mm) • Shaft diameter: 3/32" (2.5mm) The Fluke ISLS3 Insulated Slotted Screwdriver, 3/32 x 3 in., 2.5 mm x 75 mm, 1000 V will always feel right. From the moment you first put it in your hand, you're ready to go to work. The screwdriver gives you maximum torque and a comfortable grip that reduces fatigue. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Slotted Screwdriver, 5/32 x 4" 1000V FEATURES: • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design • Slim insulated shaft allows access in hard to reach areas • Forged from German CMV steel for superior durability • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Blade length: 4" (100mm) • Handle length: 3 11/16" (94mm) • Shaft diameter: 5/32" (4mm) The Fluke ISLS5 Insulated Slotted Screwdriver, 5/32 x 4 in., 4 mm x 100 mm, 1000 V will always feel right. From the moment you first put it in your hand, you're ready to go to work. The screwdriver gives you maximum torque and a comfortable grip that reduces fatigue. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Slotted Screwdriver, 1/4 x 5" 1000V FEATURES: • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design • Slim insulated shaft allows access in hard to reach areas • Manufactured from CMV steel for superior durability • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Blade length: 5" (125mm) • Handle length: 4 3/16" (106mm) • Shaft diameter: 1/4" (6mm) The Fluke ISLS8 Insulated Slotted Screwdriver, 1/4 x 5 in., 6 mm x 125 mm, 1000 V will always feel right. From the moment you first put it in your hand, you're ready to go to work. The screwdriver gives you maximum torque and a comfortable grip that reduces fatigue. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Phillips Screwdriver, #1, 3" 1000V FEATURES: • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design • Slim insulated shaft allows access in hard to reach areas • Forged from German CMV steel for superior durability • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Size: #1 • Blade length: 3" (75mm) • Handle length: 3 11/16" (94mm) • Shaft Diameter: 7/32" (5.5mm) The Fluke IPHS1 Insulated Phillips Screwdriver, #1, 3 in., 75 mm, 1000 V will always feel right. From the moment you first put this tool in your hand, you're ready to go to work. The screwdriver gives you maximum torque and a comfortable grip that reduces fatigue. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Phillips Screwdriver, #2, 4" 1000V FEATURES: • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design • Slim insulated shaft allows access in hard to reach areas • Manufactured from CMV steel for superior durability • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident SPECIFICATIONS: • Size: #2 • Blade length: 4" (100mm) • Handle length: 4 3/16" (106mm) • Shaft diameter: 1/4" (6mm) The Fluke IPHS2 Insulated Phillips Screwdriver, #2, 4" 1000 V will always feel right. From the moment you first put it in your hand, you're ready to go to work. The screwdriver gives you maximum torque and a comfortable grip that reduces fatigue. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Squared Screwdriver #2 1000V FEATURES: • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design • Slim insulated shaft allows access in hard to reach areas • Forged from German CMV steel for superior durability Insulated squared screwdriver #2. Tip size, 4 inches blade size, 1000V made of chromium-molybdenum-vanadium steel

INCLUDES: • (1) Insulated Squared Screwdriver #2, 1000V FEATURES: • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design • Slim insulated shaft allows access in hard to reach areas • Forged from German CMV steel for superior durability Insulated squared screwdriver #2 tip size, 5 inches blade size, 1000V made of chromium-molybdenum-vanadium steel.

INCLUDES: • (1) Insulated Slotted Screwdriver 3/32x3" 1000V • (1) Insulated Slotted Screwdriver 5/32x4" 1000V • (1) Insulated Slotted Screwdriver 1/4x5" 1000V • (1) Insulated Phillips Screwdriver #1, 3" 1000V • (1) Insulated Phillips Screwdriver #2, 4" 1000V • (1) Insulated Squared Screwdriver #1, 4" 1000V • (1) Insulated Squared Screwdriver #2, 5" 1000V FEATURES: • Slot, Phillips and square options, variety of sizes and shaft lengths • Ergonomic handle that adapts to user’s hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design; slim insulated shaft allows access in hard to reach areas • Manufactured from CMV steel for superior durability • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident The Fluke IKSC7 7 Piece Insulated Screwdriver Kit will always feel right. From the moment you first put these tools in your hand, you're ready to go to work. These screwdrivers give you maximum torque and a comfortable grip that reduces fatigue. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Long Nose with Side Cutter, 8" 1000V • (1) Insulated High Leverage Diagonal Cutter, 8" 1000V • (1) Insulated Lineman Combination Pliers, 8" 1000V • (1) Roll-up Pouch FEATURES: • Long nose pliers • Heavy duty diagonal cutter • Heavy duty combination pliers • Forged from German CMV steel for superior durability The Fluke IKPL3 3 Piece Insulated Pliers Kit with Roll-up Pouch (RUP8) will always feel right. From the moment you first put these tools in your hand, you're ready to go to work. These pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Insulated Long Nose with Side Cutter, 8" 1000V • (1) Insulated High Leverage Diagonal Cutter, 8" 1000V • (1) Insulated Lineman Combination Pliers, 8" 1000V • (1) Insulated Slotted Screwdriver 3/32x3" 1000V • (1) Insulated Slotted Screwdriver 5/32x4" 1000V • (1) Insulated Slotted Screwdriver 1/4x5" 1000V • (1) Insulated Phillips Screwdriver #1, 3" 1000V • (1) Insulated Phillips Screwdriver #2, 4" 1000V • (1) Roll-Up Pouch FEATURES: • Ergonomic handle that adapts to user's hand, causes less strain and work fatigue and provides maximum torque • Full length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security, and anti-roll handle design • Slim insulated shaft allows access in hard-to-reach areas • Manufactured from CMV steel for superior durability • Designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident The Fluke IKST7 Insulated Hand Tools Starter Kit with Five (5) Insulated Screwdrivers and Three (3) Insulated Pliers will always feel right. From the moment you first put these tools in your hand, you're ready to go to work. These screwdrivers give you maximum torque and a comfortable grip that reduces fatigue, while the pliers offer a smooth, solid motion, without a need for break-in. Take everything that makes Fluke test tools great, and put that into insulated hand tools. That's what you will have on your toolbelt.

INCLUDES: • (1) Industrial-Grade Professional Tool Backpack • (1) Insulated Long Nose with Side Cutter, 8" 1000V • (1) Insulated High Leverage Diagonal Cutter, 8" 1000V • (1) Insulated Lineman Combination Pliers, 8" 1000V • (1) Insulated Slotted Screwdriver 3/32x3" 1000V • (1) Insulated Slotted Screwdriver 5/32x4" 1000V • (1) Insulated Slotted Screwdriver 1/4x5" 1000V • (1) Insulated Phillips Screwdriver #1, 3" 1000V • (1) Insulated Phillips Screwdriver #2, 4" 1000V • (1) Roll-Up Pouch FEATURES: • Pack30 Professional Tool Backpack is built with durable high-quality polyester and injection molded plastic bottom base • Over 30 pockets for storing and carrying tools • Six storage compartments for storing test tools, hand tools, laptop or tablet, and other small items • Rugged waterproof molded bottom base offers protection from elements and keeps backpack standing for convenient access to tools • Adjustable chest strap for ergonomic attachment and even weight distribution • Molded EVA covers for front and top of backpack for added protection • Hand Tool Kit are designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident The Fluke IKPK7 features the Pack30 Industrial-Grade Professional Tool Backpack, which offers a convenient method for organizing, storing and your carrying tools. Keeping all the tools you need in a single Fluke Pack30 means fewer trips back to the truck. Plus, the Fluke Pack30 gives you a more comfortable solution than traditional tool belts that put all the weight on your lower back, or tool bags with awkward carrying straps.

INCLUDES: • (1) Electrical Tester • (1) Insulated Long Nose with Side Cutter, 8" 1000V • (1) Insulated High Leverage Diagonal Cutter, 8" 1000V • (1) Insulated Lineman Combination Pliers, 8" 1000V • (1) Insulated Slotted Screwdriver 3/32x3" 1000V • (1) Insulated Slotted Screwdriver 5/32x4" 1000V • (1) Insulated Slotted Screwdriver 1/4x5" 1000V • (1) Insulated Phillips Screwdriver #1, 3" 1000V • (1) Insulated Phillips Screwdriver #2, 4" 1000V • (1) Roll-Up Pouch FEATURES: • T6-1000 electrical tester measures voltage to 1000 V ac through the open fork, without test leads • FieldSense technology for AC voltage, current and frequency measures voltage without making electrical contact to live voltage • FieldSense does NOT perform DC measurements • Simultaneous voltage and current display shows all power supply measurements at glance for efficient troubleshooting • Insulated Hand Tool Kit are designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident The Fluke IBT6K features the T6-1000 Electrical Tester with FieldSense Technology, 1000V, which lets you measure voltage the same way that you measure current, without test lead contact to live voltage. Just slide the open jaw over a conductor and see the voltage level. Much more than just a voltage detector, these new testers give you a reliable voltage and current measurement, without test leads and without contacting a bare, metal conductor.

INCLUDES: • (1) 87V Industrial Digital Multimeter • (3) Slot Screwdrivers • (2) Phillips Screwdrivers • (3) Insulated Pliers FEATURES: • 87V DMM has a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument • True RMS AC voltage and current for accurate measurements on non linear signals • IKST7 Insulated Hand Tool Kit is designed to block potentially hazardous voltages from reaching you • Subjected to a 10,000 V dielectric strength test, protection protection works • Certified to 1,000 V ac and 1,500 V dc by VDE, (independent third-party lab) • Comply to international standards such as IEC 60900 and ASTM F1505 • Critical part of NFPA 70E, which requires personal protective equipment and insulated tools rated for electrical installation • Critical protective component between you and unplanned incident The Fluke IB875K features the 87V True-RMS Industrial Digital Multimeter with Temperature Measurement, which is the right choice when productivity is on the line and you need to solve problems fast. This instrument delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V allows you to gain productivity by taking the guesswork out of drive system troubleshooting, even in loud, high energy, and high altitude locations.