Part Number: #59095
Mfg No.: ETF290A
Mfg: Sloan Valve Co
This faucet mounting kit is designed for the following Sloan Optima and Optima Plus electronic faucets: ETF-80, ETF-880, EBF-85, and EBF-187. Contains rubber gasket, mounting washer, mounting nut and ETF-297 compression fitting connector
Whatever part you need to fix your Sloan electronic faucet, we’ve got it right here at SloanRepair.com. Our knowledgeable team is ready to provide you with any technical assistance you may need. With years of experience and continuous training, we’ll make sure you get the right part the first time, every time.
Part Number: #84114
Mfg No.: EFX21A
Mfg: Sloan Valve Co
Faucet Mounting Kit for Sloan electronic faucets with 4" integrated bases. Kit includes 2 threaded rods, 2 extended nuts, 2 rubber washers, 2 metal washers and 4" center rubber plate. Be careful not to pull or crimp any AC power lines when installing the faucet.
Whatever part you need to fix your Sloan Basys faucet, we’ve got it right here at SloanRepair.com. Our knowledgeable team is ready to provide you with any technical assistance you may need. With years of experience and continuous training, we’ll make sure you get the right part the first time, every time.
Part Number: #84113
Mfg No.: EAF1
Mfg: Sloan Valve Co
Faucet Mounting Kit for Sloan electronic pedestal (single hole) faucets. Kit includes threaded rod, extended nut, O-Ring, rubber washer, and c-clip. Be careful not to pull or crimp any AC power lines when installing the faucet.
Whatever part you need to fix your Sloan Basys faucet, we’ve got it right here at SloanRepair.com. Our knowledgeable team is ready to provide you with any technical assistance you may need. With years of experience and continuous training, we’ll make sure you get the right part the first time, every time.
Part Number: #54684
Mfg No.: ETF-546-A
Sloan Code Number: 3365088
Mfg: Sloan Valve Co
This faucet mounting kit is for use on the ETF-600 electronic faucet. The kit includes a base gasket, two (2) slotted mounting washers, two (2) wing nuts, and a compression fitting connector.
Part Number: #80771
Mfg No.: EAF14A
Mfg: Sloan Valve Co
This Sloan faucet sensor assembly without the i.q. cliq feature is designed for use in the Sloan Optima Plus solar-powered electronic faucet model EAF-275, also referred to as a Solis faucet. The sensor is 6-volt.
Part Number: #83568
Mfg No.: SFP41A
Mfg: Sloan Valve Co
Electronic Faucet Sensor Assembly with Range Adjustment and a 6-pin connector. Used with Control Module #81114 (SFP-40-A.) Designed for use with the following Sloan Electronic Faucets: SF-2100, SF-2150, SF-2200, and SF-2250.
Sloan Faucets
View our full selection of Sloan Valve faucets here and find the right faucet for your needs as well as the repair parts needed to install and service your new faucets all on SloanRepair.com. We carry electronic faucets, battery operated faucets, solar powered faucets, combination power source faucets and more. Browse through our pre-tempered water faucets, gooseneck faucets, spout mixer faucets, pedestal faucets and other faucet styles. Click on units of interest to see high quality product photos and detailed product descriptions to help choose the best Sloan faucet for your commercial application.
Show 12 products per page Show 24 products per page Show 48 products per page
Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity
This month our “Pros of the Month” are Robert and Kelli Frank and Four Star Plumbing in South Orange County, CA. We talked to Kelli about the business that her husband started over 24 years ago. He ran the business for many years as an owner-operator with just one tech. His business model was based on being the most honest and hardworking, highly-skilled plumber his customers could ever want. He saw that need was not being met in the community, and knew he could provide that type of service. Based on these principles, Robert provided outstanding service to his customers, and his business began to grow. As the business continued to be successful, Robert knew his business could grow even more if he had the right people in place. Before they were even married, Robert and Kelli spent about 4 years discussing their goals for the future of the business, and how they might achieve those goals.
Fein 6-35-02-103-01-0 Specifications:
• Diameter: 3-1/8"
• Quantity: 2-Pack
Fein 6-35-02-103-01-0 Features:
• HSS Saw Blade for SuperCut only
• Full round blade provides for long blade life
• Best for long, straight cuts
• Can be used for cutting sheet metal up to 18 gauge, as well as wood, putty and plastics
Fein 63134301004 Fein Slugger 1-3/16" x 4" HSS Nova Annular Cutter
Regular price
$184.36
/
INCLUDES:
• (1) Fein Slugger 1-3/16" x 4" HSS Nova Annular Cutter
FEATURES:
• Drill holes 3 times faster than twist drills
• Drill unique and curved surfaces
• Allow overlap cuts on existing holes
• Produce reamed quality burr-free holes
• Coolant fed cutting edges
• Produces solid slug.
• Reduce machine size and horsepower requirements
• Manufactured with C.N.C. accuracy
• Resharpenable cutting edges
• Eliminate time consuming, costly pilot holes and step drilling
• 3/4" Weldon shank allows cutter to be used with other competitive magnetic drills
• Requires Pilot Pin 16010
• Suitable for aluminum and other non-ferrous metals
The Jancy Slugger uncoated, high-speed steel metric annular cutter with 3” depth and a 3/4” annular cutter shank is used to create metric-sized through holes as deep as 3” in a range of materials, with best performance in mild steel and structural steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the need for secondary operations such as pre-drilling and reaming.
INCLUDES:
• (1) SuperCut Construction in a metal tool case
• (1) Vibration-reducing handle
• (5) Cutter blades, straight (type 117)
• (1) Elongated pointed blade (type 116)
FEATURES:
• Highest quality and stability due to the use of ball and needle bearings together with a motor and gearbox designed for continuous use and heavy loads.
• Hexagonal tool mount for outstanding torque transfer between tool and accessories.
• Powerful oscillation motion (2" x 2" Degree range) for maximum work progress.
• Ergonomic design for fatigue-free work.
• Vibration-absorbing bail handle to minimize physical strain.
• Dust extraction assembly attaches without tools.
• 3-Year Limited Waranty
SPECIFICATIONS:
• Power consumption: 400 Watts
• Power output: 220 Watts
• Oscillations: 11,000-18,500 rpm
• Range: 2 x 2,0
• Cable with plug: 16'
• Weight according to EPTA: 3.8 lbs
• Chuck: Hexagon
• Tool change: Manual with screw, hexagonal socket
The high-performance system for interior construction and renovation, specially equipped with accessories for the most important applications in caulking / sealant repair.
Fein 72705861120 Jmu 137-2 Qw Universal Magnetic Core Drill, Up To 1-3/8"
Regular price
$1,176.00
/
INCLUDES:
• (1) JMU 137-2QW Universal Magnetic Core Drill (72705861120)
• (1) Case
• (1) Coolant Tank
• (1) Safety Strap
• (1) Chip Hook
• (1) Centering Pin
• (1) Touch Guard
• (1) 3-Jaw Chuck
FEATURES:
• Pivoting motor cable protection sleeve
• Reversible
• Electronic speed control
• Mechanic 2-gearbox for twist drilling
• 3-coil magnet, only 2-3/4 in [70 mm] wide
• Simple and error-proof control concept
• Additional magnet switch in the drill stand
• Tool-free core bit fast change system
• Speed-controlled tacho electronics
• Magnetic holding force gauge
• Integrated cooling tank
• Hand feed wheel can be mounted on either side
• Tilt sensor
• Memory function speed storage
SPECIFICATIONS:
• Carbide Annular Cutters Max. Diameter: 1-3/8"
• HSS Annular Cutters Max. Diameter: 1-3-8"
• Mag Base, Max. Drilling Depth: 2"
• Twist Drill Max. Diameter: 5/8"
• Tapping: 5/8"
• Power Consumption: 1,100 Watts
• Power Output: 550 Watts
• 1st Gear: 130-520 rpm
• 2nd Gear: 400-1,600 rpm
• Annular Cutter Holder: 3/4" Weldon
• Annular Cutter Change: tool-free
• Stroke: 5-5/16"
• Magnetic Holding Force: 2,136 lbs
• Magnetic Base Sizes: 7-5//16" x 2-3/4"
• Cable Length with Plug: 13 ft
The Fein JMU 137-2QW Universal Magnetic Core Drill (72705861120) is a compact and lightweight machine with a perfect power to weight ratio that makes it ideal for work at heights and in tight spaces. It is versatile and offers universal use in applications such as core drilling, twist drilling, tapping, countersinking, and reaming due to forward and reverse rotation capability, electronic speed setting, and a 10-1/4" stroke. With a weight-optimized construction, a high performance motor, and tilt sensor the JMU 137-2QW is capable of magnetic core drills up to 1-3/8" (35 mm) at depths up to 2".
Show 12 products per page Show 24 products per page Show 48 products per page
Sort by relevance Sort by price, low to high Sort by price, high to low Sort by popularity
