Dremel 83142 Specifications:
• Bit Diameter: 9/32" (7.1 mm)
• Color Code: Green
• Shank Diameter 1/8" (3.2 mm)
• Model Number: 83142
Dremel 83142 Features:
• Ideal for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non-ferrous metals.
• Specially designed for working with conic and flat surfaces.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Dremel 83322 Specifications:
• Bit Diameter: 1/8" (3.2 mm)
• Shank Diameter: 1/8" (3.2 mm)
• Color Code: Green
Dremel 83322 Features:
• Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals
• Ideal for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non-ferrous metals
• Specially designed for working with conic and flat surfaces
Dremel 83702 Specifications:
• Bit Diameter: 1/8" (3.2 mm)
• Color Code: Green
• Shank Diameter 1/8" (3.2 mm)
• Model Number: 83702
Dremel 83702 Features:
• Ideal for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non-ferrous metals.
• Specially designed for working with conic and flat surfaces.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Dremel 84922 Specifications:
• Bit Diameter: 3/16" (4.8 mm)
• Shank Diameter: 1/8" (3.2 mm)
• Color Code: Green
Dremel 84922 Features:
• Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals
• Ideal for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non-ferrous metals
• Specially designed for working with conic and flat surfaces
Dremel 85422 Specifications:
• Bit Diameter: 25/32" (19.8 mm)
• Shank Diameter 1/8" (3.2 mm)
• Color Code: Green
Dremel 85422 Features:
• Silicon Carbide Grinding Stones are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals
• Ideal for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non-ferrous metals
• Specially designed for working with conic and flat surfaces
Dremel 85602 Specifications:
• Bit Diameter: 13/32" (10.3 mm)
• Color Code: Green
• Shank Diameter 1/8" (3.2 mm)
• Model Number: 85602
Dremel 85602 Features:
• Ideal for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non-ferrous metals.
• Specially designed for working with conic and flat surfaces.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Dremel 90930 Specifications:
• 2 Brushes Per Pack
Dremel 90930 Features:
• For use with Dremel 275, 285, 395 and 595* rotary tools (Type 3*, 4*, 5* and 6 only)
• May also be used with the Dremel Contour Sander (Type 1 and 2)
INCLUDES:
•(2) Motor Brushes
FEATURES:
• Restore life to your corded Dremel rotary tool
• The right brush means proper performance
• Service part only
• For use with Dremel rotary tool model(s): 100, 200, 275, 285, 300, 395 and 595 (type 3, 4, 5 & 6) and Dremel contour sander 6000 (type 1 & 2)
SPECIFICATIONS:
• Material: Metal
One pair of motor brushes. For use with Dremel rotary tool model(s): 100, 200, 275, 285, 300, 395 and 595 (Type 3, 4, 5 & 6). And Dremel contour sander 6000 (Type 1 & 2).
Dremel 911 Specifications:
• Bit Diameter: 7/16″ (11.1 mm)
• Color Code: Green
• Shank Diameter: 1/8″ (3.2 mm)
• Model Number: 911
Dremel 911 Features:
• Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Specially designed for working with conic surfaces.
• Use the 415 dressing stone (sold separately) to clean the surface of the grinding stone and restore its original shape. You can also use the dressing stone to create a grinding stone with just the right shape for that special job.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Dremel 932 Specifications:
• 3/8" Bit Diameter
• 1/8" Shank
Dremel 932 Features:
• Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel
• Specially designed for working with flat surfaces
• A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust
INCLUDES:
• (1) Aluminum Oxide Grinding Stone
FEATURES:
• A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
• Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Specially designed for working with conic surfaces.
SPECIFICATIONS:
• Diameter: 5/8"
• Shank: 1/8"
INCLUDES:
• (1) Aluminum Oxide Grinding Stone
FEATURES:
• Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Specially designed for working with conic surfaces.
• A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
SPECIFICATIONS:
• Diameter: 3/16"
• Shank: 1/8"
Dremel 952 Specifications:
• 3/8" Bit Diameter
• 1/8" Shank
Dremel 952 Features:
• Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel
• Specially designed for working with conic surfaces
• A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust
INCLUDES:
• (1) Aluminum Oxide Grinding Stone
FEATURES:
• A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
• Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. Specially designed for working with conic surfaces.
SPECIFICATIONS:
• Diameter: 5/8"
• Shank: 1/8"
Dremel 9901 1/8" Tungsten Carbide Cutter, Flat Tip
Regular price
$9.56
/
Dremel 9901 Specifications:
• Bit Diameter: 1/8"
• Shank: 1/8"
Dremel 9901 Features:
• Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials
• Flat tip (cylindrical shape)
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds
Dremel 9902 Specifications:
• Bit Diameter: 3/32″ (2.4 mm)
• Color Code: Teal
• Shank Diameter 1/8″ (3.2 mm)
• Model Number: 9902
Dremel 9902 Features:
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.
• Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
• Secure objects to a stable surface while working.
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed.
Dremel 9903 Specifications:
• Bit Diameter: 1/8"
• Shank: 1/8"
Dremel 9903 Features:
• Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds
INCLUDES:
• (1) Bit
FEATURES:
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
• Use the sides of the cutter (rather than the tip) for effective cutting
SPECIFICATIONS:
• Material: Tungsten Carbide
• Tip Diameter: 2.38mm
Tungsten Carbide Cutters are ideal for shaping, smoothing or removing material from especially hard materials. Materials include hardened and stainless steel, cast iron, hardwoods, nonferrous metals, fired ceramics and especially hard plastics. 3/32“ (2.38mm) tip diameter.
Dremel 9905 Specifications:
• Bit Diameter: 1/8″ (3.2 mm)
• Color Code: Teal
• Shank Diameter 1/8″ (3.2 mm)
• Model Number: 9905
Dremel 9905 Features:
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.
• Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
• Secure objects to a stable surface while working.
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed.
Dremel 9906 Specifications:
• Bit Diameter: 1/8? (3.2 mm)
• Color Code: Teal
• Shank Diameter 1/8? (3.2 mm)
• Model Number: 9906
Dremel 9906 Features:
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.
• Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
• Secure objects to a stable surface while working.
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed.
Dremel 9909 Specifications:
• Bit Diameter: 1/8″ (3.2 mm)
• Color Code: Teal
• Shank Diameter 1/8″ (3.2 mm)
• Model Number: 9909
Dremel 9909 Features:
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.
• Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
• Secure objects to a stable surface while working.
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed.
Dremel 9910 Specifications:
• Bit Diameter: 1/8″ (3.2 mm)
• Color Code: Teal
• Shank Diameter 1/8″ (3.2 mm)
• Model Number: 9910
Dremel 9910 Features:
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.
• Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
• Secure objects to a stable surface while working.
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed.
Dremel 9911 Specifications:
• Bit Diameter: 1/8″ (3.2 mm)
• Color Code: Teal
• Shank Diameter 1/8″ (3.2 mm)
• Model Number: 9911
Dremel 9911 Features:
• Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.
• A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.
• Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
• Secure objects to a stable surface while working.
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed.
