Amana 47116 Flush Trim Router Bits with Ball Bearing Guide
Regular price
$23.05
/
INCLUDES:
• (1) Flush Trim Router Bits with Ball Bearing Guide
FEATURES:
• Use any of the flush trimming bits below for laminate work or for template and pattern work
• For template application, the bearing follows the template, while the cutting edges trim the workpiece
• With the router handheld, the template is on the bottom of the work
• With a table-mounted router, the template is on top
• A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes
• Excellent for template work
SPECIFICATIONS:
• Length: 2 Inch
• Diameter: 1/4 Inch
• Flute Length: 1/2 Inch
Amana 47124 Flush Trim 1/2" Diameter 1/2" Shank Router Bit
Regular price
$28.20
/
Amana 47124 Specifications:
• Diameter: 1/2"
• Carbide Height: 1-1/2"
• Shank: 1/2"
• Length: 3-7/8"
• Flutes: 2
Amana 47124 Features:
• Use this bit for template or pattern work where the workpiece is unusually thick.
• The two-flute configuration cuts fast and produces a smooth finish.
• For a superior finish, use the three-flute version.
• Twin bearings on selected tools provide better contact with reference edge and more stability in the cut
Amana 47126 Flush Trim 1/2" Diameter 1/2" Shank Router Bit
Regular price
$30.65
/
Amana 47126 Specifications:
• Diameter: 1/2"
• Carbide Height: 2"
• Shank: 1/2"
• Length: 4-1/4"
• Flutes: 2
Amana 47126 Features:
• Use this bit for template or pattern work where the workpiece is unusually thick.
• The two-flute configuration cuts fast and produces a smooth finish.
• For a superior finish, use the three-flute version.
• Twin bearings on selected tools provide better contact with reference edge and more stability in the cut
Amana 47160 Specifications:
• Diameter: 5/8"
• Carbide Height: 1"
• Shank: 1/4"
• Length: 2-1/2"
Amana 47160 Features:
• Trim the edges of face frames flush with cabinet sides with this bit.
• At the same time, cut a decorative 'V' groove to conceal the seam between the frame and the case.
Amana 47162 Specifications:
• Diameter: 5/8"
• Carbide Height: 1"
• Shank: 1/2"
• Length: 3"
Amana 47162 Features:
• Trim the edges of face frames flush with cabinet sides with this bit.
• At the same time, cut a decorative 'V' groove to conceal the seam between the frame and the case.
Amana 47170 Carbide Tipped Flush Trim Cutter Assembly
Regular price
$19.85
/
INCLUDES:
• (1) Carbide Tipped Flush Trim Cutter Assembly
FEATURES:
• Excellent for cutting laminates, MDF, Plywood, Wood, and Acrylic
• Fully assembled flush trim router bit, complete with shank, 2-flute carbide tipped cutter, bearing & screw.
• Quickly& easily change cutters without removing arbor from the router
• Carbide tipped cutters are mounted on alloy steel arbors with hex drive to eliminate slipping
• Save money by replacing only the cutters when the knives become dull, instead of replacing the entire tool
SPECIFICATIONS:
• Diameter: 1/2
• Cutting Height: 1/2
• Shank: 1/4
• Overall Length: 1-31/32
• Replacement Bearing: 47706
• Flutes: 2
E-Z Change™ router bits are an economical alternative to standard router bits. They feature replaceable head carbide tipped cutters, saving you money by replacing only the cutters when the knives become dull, instead of the entire tool. You won't need a second bit while yours is in the sharpening shop; instead, just change the cutters. You won't even lose your set-up because the E-Z Change™ cutters can be replaced with the bit in the router collet. The interlocking hex design guarantees that the cutting surfaces will not slip during use.
Amana 47200 Specifications:
• Diameter: 5/8"
• Degree: 15°
• Carbide Diameter: 9/32"
• Shank: 1/4"
• Length: 1-7/8"
Amana 47200 Features:
• This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router.
• The solid construction reduces vibration for the smoothest cut possible with a two-flute bit.
Amana 47202 Specifications:
• Diameter: 23/32"
• Degree: 25°
• Carbide Diameter: 9/32"
• Shank: 1/4"
• Length: 1-7/8"
Amana 47202 Features:
• This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router.
• The solid construction reduces vibration for the smoothest cut possible with a two-flute bit.
Amana 47204 Specifications:
• Diameter: 1-1/16"
• Degree: 45°
• Carbide Diameter: 9/32"
• Shank: 1/4"
• Length: 2"
Amana 47204 Features:
• This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router.
• The solid construction reduces vibration for the smoothest cut possible with a two-flute bit.
Amana 47300 Specifications:
• Diameter: 15/16"
• Degree: 23°
• Carbide Diameter: 7/16"
• Shank: 1/4"
• Length: 1-7/8"
• Flute: 3
Amana 47300 Features:
• The solid construction of this carbide-tipped bit reduces vibration, and its three-flute configuration produces a very smooth cut.
• Intended for use in a standard router.
Amana 47302 Specifications:
• Diameter: 3/4"
• Degree: 7°
• Carbide Diameter: 7/16"
• Shank: 1/4"
• Length: 2"
• Flute: 3
Amana 47302 Features:
• The solid construction of this carbide-tipped bit reduces vibration, and its three-flute configuration produces a very smooth cut.
• Intended for use in a standard router.
