INCLUDES:
• (1) Remote Mounting Stand
For fiber optic cable pulling applications that demand flexibility in set-up, the Remote Mounting Stand allows positioning of the cable puller well away from the power source. Easy to set up, the unit is both sturdy and compact. Features 21/2" (64 mm) square mount to accommodate any Fiber Optic Cable Puller.
Condux 08675130 Fiber Optic Cable Puller Base Mount
Regular price
$320.00
/
INCLUDES:
• (1) Fiber Optic Cable Puller Base Mount
SPECIFICATIONS:
• Part Number: 08675130
• Description: Base Mount
Mounting Socket, Fiber Optic Cable Puller Accessories. The Condux Fiber Optic Cable Puller has a square mounting post 2 1?2" (64 mm) x 2 1?2" (64 mm). A female mounting socket is required for stability during cable pulling operations.
INCLUDES:
• (1) Capstan 50" Diameter X 8.00" Flat
SPECIFICATIONS:
• Weight: 200 lbs
• Max Pulling Force: 600 lbs
• Max Pulling Speed: 391.4 ft/min
• Max Cable Diameter: 1.25 Inch
The Condux Capstan is used to conform to the many specifications of fiber optic cable available, and to offer more cable pulling capabilities,and its intended use is for pulling innerduct power, telephone or coaxial cables.
Condux 08675675 Open Style Fiber Optic Cable Pulling Trailer
Regular price
$13,881.58
/
INCLUDES:
• (1) Open Style Fiber Optic Cable Pulling Trailer
• (1) Trailer Flat Assembly
• (1) Wheel Chocks
• (1) Tool Box
FEATURES:
• Options include a choice of two Condux Fiber Optic Cable Puller packages, choice of five capstans, a 13 HP (9.7 kW) Power Pack and a Remote Mounting Stand.
• The trailer bed is designed to accommodate standard and optional equipment with built-in mounting systems for secure travel.
• *50" capstan not compatible with the mounting bracket
SPECIFICATIONS:
• Weight (without puller): 950 lbs (431 kg)
• Axle: 3,500 lbs (1,590 kg) Type II
• Tire: P205/75R14 Steel Belted Radials
• Rims: 14” x 6” (356 mm x 152 mm)
• Track: 60” (1,254 mm)
• Overall Width: 80” (2,032 mm)
• Overall Height: 51” (1,295 mm)
• Hitch: 3” (76 mm) Lunette Eye
• Lighting: 7 Pin Connector
• Electronics: 12 VDC
• Engine: Briggs & Stratton V-Twin Vanguard OHV gas
• Horsepower: 16HP @ 3,600 RPM (11.9 kW @3,600 RPM)
• Starting: Electric
• Fuel: Unleaded Gas, 85 Octane min, 10% or less ethenol blend
• Fuel Capacity: 5.0 gallons (18.9 liters)
• Speed Control: Variable
• Hydraulics Capacity: 8.2 gpm @ 2,000 psi (31.0 lpm@138 bar
• Reservoir: 5.0 gallons (18.9 liters)
• Filtration: 10 micron return line canister type
• Hydraulic Oil Requirements" Petro based, anti-wear, high viscosities over 140
Access job sites with ease using the Condux Open Style Fiber Optic Cable Puller Trailer. The open style has advantages in portability, accessibility and cost. On the job, gain easy access to all components with the open face design. Small items can be stowed in a lockable storage compartment. Leveling and stabilizing hardware is included. The Open Face Fiber Optic Cable Puller Trailer comes standard with built-in cable puller mounts on the left and right rear corners.
INCLUDES:
• (1) 13hp Variable Flow Power Pack
FEATURES:
• Variable Flow
• Gel Filled Battery
• Foam Filled Tires
SPECIFICATIONS:
• Weight: 143lbs (65kg)
• Hydraulic System: Open Center
• Frame Type: Two Wheel Mobile Unit
• Length x Width x Height: 26.5" x 20" x 27.5"
• Filtration: 10 Micron Return Line Canister
• Oil Cooler: Air to Oil
• Engine: Gas (Honda)
• Fuel: 1.6g (6.4L)
• Hydraulic Oil: 5g (18.9L)
• Hydraulic Relief Valve Pressure: 2150psi (148 bar)
This portable power source is matched perfectly to the requirements for the Condux Fiber Optic Cable Blower and Puller. Utilizing a small footprint, the 13hp Power Pack features a variable flow switch (from 5gpm to 8gpm) to ensure that every job can be covered with just one machine.
INCLUDES:
• (1) Electronic Control Box (ECB)
• (1) Chart Recorder
• (1) Load Cell.
Ugrade kit for the Fiber Optic Cable Puller Package 1 and 3 features an Electronic Tension Control system with adjustable digital load limits and a load cell tension measuring device with a paperless recorder and trend display, compact flash drive with 64MB flash card and USB interface. Also the monitoring components record permanent documentation of your pull.A Programmable overload set point has both an audible and visual indication of an overload condition.The Electronical Control Box also has the capacity to disengage the cable puller if an overload occurs.
Condux 08677350 Running Line Tensiometer, Cableglider Std
Regular price
$10,720.50
/
INCLUDES:
• (1) Mechanical Sensing Unit
• (1) Electrical Control Board
• (1) Load Cell and Cord
• (1) Mounting Hardware
• (1) Card Reader and software
FEATURES:
• Mechanical Sensing Unit Mounts easily to the cable puller frame with a mounting bracket and pin
• Condux Running Line Tensiometer`s sensing unit permits rope installation without disassembly of the unit.
• Electronic Control Box features large LED Display and paperless recorder with trend display, compact flash card slot with a 64MB flash card and USB interface.
• A Programmable overload set point has both an audible and visual indication of an overload condition.
• The Electronical Control Box also has the capacity to disengage the cable puller if an overload occurs.
Condux Running Line Tensiometer used with Condux CableGlider® Cable Pullers will give accurate measurements of the force exerted on a cable as it is installed. It consists of a Mechanical Sensing Unit and the Electronic Control Box. The unit will accommodate pull tape and rope up to 7/8” diameter with an accuracy of ±5% of full scale. Measures loads of 0 to 6,500lbs(0 to 28,912 N) with an accuracy of ±325lbs(1,446N).
Condux 08677355 Running Line Tensiometer, Cableglider Plus
Regular price
$10,856.19
/
INCLUDES:
• (1) Mechanical Sensing Unit
• (1) Electrical Control Board
• (1) Compact Flash Drive with 64MB Flash Card o USB Interface
• (1) Load Cell and Cord
• (1) Mounting Hardware
• (1) Card Reader and software
FEATURES:
• Mechanical Sensing Unit Mounts easily to the cable puller frame with a mounting bracket and pin
• Condux Running Line Tensiometer`s sensing unit permits rope installation without disassembly of the unit.
• Electronic Control Box features large LED Display and paperless recorder with trend display, compact flash card slot with a 64MB flash card and USB interface.
• A Programmable overload set point has both an audible and visual indication of an overload condition.
• The Electronical Control Box also has the capacity to disengage the cable puller if an overload occurs.
Condux Running Line Tensiometer used with Condux CableGlider® Cable Pullers will give accurate measurements of the force exerted on a cable as it is installed. It consists of a Mechanical Sensing Unit and the Electronic Control Box. The unit will accommodate pull tape and rope up to 7/8” diameter wit6h an accuracy of ±5% of full scale. Measures loads of 0 to 6,500lbs(0 to 28,912 N) with an accuracy of ±325lbs(1,446N)
Condux 08677360 Running Line Tensiometer, Cableglider Hd
Regular price
$11,263.30
/
INCLUDES:
• (1) Mechanical Sensing Unit
• (1) Electrical Control Board
• (1) Compact Flash Drive with 64MB Flash Card o USB Interface
• (1) Load Cell and Cord
• (1) Mounting Hardware
• (1) Card Reader and software
FEATURES:
• Mechanical Sensing Unit Mounts easily to the cable puller frame with a mounting bracket and pin
• Condux Running Line Tensiometer`s sensing unit permits rope installation without disassembly of the unit.
• Electronic Control Box features large LED Display and paperless recorder with trend display, compact flash card slot with a 64MB flash card and USB interface.
• A Programmable overload set point has both an audible and visual indication of an overload condition.
• The Electronical Control Box also has the capacity to disengage the cable puller if an overload occurs.
Condux Running Line Tensiometer used with Condux CableGlider® Cable Pullers will give accurate measurements of the force exerted on a cable as it is installed. It consists of a Mechanical Sensing Unit and the Electronic Control Box. The unit will accommodate pull tape and rope up to 7/8” diameter with an accuracy of ±5% of full scale. This unit measures loads of 0 to 12,000Lbs with an accuracy of 600lbs
Condux 08678025 Cableglider® Std - 220 Volt Cable Puller
Regular price
$11,646.35
/
INCLUDES:
• (1) CableGlider® STD - 220 Volt Cable Puller
• (1) Foot Switch
• (1) Retaining Fork
• (1) Conduit Adapters
• (1) 2" (51mm)
• (1) 3" (76mm)
• (1) 3 1/2" (89mm)
• (1) 4" (102mm)
• (1) Tool box for the acessories
FEATURES:
• Two speed removable power pack
• 6500 pounds of pulling force at low speed
• Self Tailing Capstan for added Stability
• Accepts all diameter rope
• Pivoting Arm
• Vertical pull from floor
• Vertical pull down from box
• Horizontal pull
• Horizontal Vault Pull
• Vertical Pull with 45 degree elbow
• Portable and easy to Set-up
• Completely self-contained units
SPECIFICATIONS:
• Weight: 102.51Kg
• Package Weight: 120.65Kg
• Total Size: Length 147.32cm x Width 68.58cm
• Maximum Reach: 2m
• Color: Blue
• Arms: Single
• Drive: Chain
• Pawl: Anti Rotational
• Pulling Force: Up to 6500 lbs
• Peak Power: 4.82 hp (3.6 kW)
• Generator: 4000 Watt Recommended*
The Condux CableGlider® STD 220 Volt Cable Puller offers portability and ease of set-up in a completely self-contained unit to adapt to a variety of pulling situations. It comes equipped with a three-speed removable power pack, providing up to 6,500 pounds (28,912 N) of pulling force at low speed. Speed changes are no problem with just a turn of a dial. Design features include a self-tailing capstan for added stability, a pivoting arm and a foot switch for operator convenience and safety. Accepts all diameter rope (self-tailing capstan accepts 5?8” (16 mm) to 7?8” (22 mm) rope only).
Condux 08678025S Standard Cableglider 220V Cable Puller Split
Regular price
$12,114.54
/
INCLUDES:
• (1) 220 Volt Puller with accessories
• (1) Foot Switch
• (1) Foot Switch
• (1) Retaining Fork
• (1) Conduit Adapters
• (1) 2" (51mm)
• (1) 3" (76mm)
• (1) 3 1/2" (89mm)
• (1) 4" (102mm)
• (1) Tool box for the acessories
FEATURES:
• Two speed removable power pack
• 6500 pounds of pulling force at low speed
• Self Tailing Capstan for added Stability
• Accepts all diameter rope
• Pivoting Arm
• Vertical pull from floor
• Vertical pull down from box
• Horizontal pull
• Horizontal Vault Pull
• Vertical Pull with 45 degree elbow
• Portable and easy set-up
• Completely self-contained unit
The Condux CableGlider STD 220 Volt Cable Puller offers portability and ease of set-up in a completely self-contained unit to adapt to a variety of pulling situations. It comes equipped with a three-speed removable power pack, providing up to 6,500 pounds (28,912 N) of pulling force at low speed. Speed changes are no problem with just a turn of a dial. Design features include a self-tailing capstan for added stability, a pivoting arm and a foot switch for operator convenience and safety. Accepts all diameter rope (self-tailing capstan accepts 5?8” (16 mm) to 7?8” (22 mm) rope only).
INCLUDES:
• (1) CableGlider LW
• (1) Foot Switch
• (1) Retaining Fork
• (1) Pivoting Arm
• (1) Canvas Carrying Bag
FEATURES:
• Fork rotates on head to accomodate different pulling situations
• Grooved capstan provides better gripping
• Electronic motor & gearbox provide 3000lbs pulling force
• Foot switch for operator safety & convenience
• Can be used for vertical or horizontal pulls
SPECIFICATIONS:
• Pulling Force: Up to 3,000lbs
• Pulling Speed: 30 ft/min
• Extension Range: 67" to 87"
• Peak Power: 95HP (.708 KW)
• Generator: 3500 Watt Recommended
The Condux CableGlider LW offers portability and ease of set-up, one-person operation, in a completely self-contained unit to adapt to a variety of pulling situations. It comes equipped with a one speed motor and gearbox that provides up to 3,000 lbs of pulling force. Design features include: a pivoting arm, Split
INCLUDES:
• (1) 5" Conduit External Adapter
SPECIFICATIONS:
• Part Number: 08678300
• Description: External Adapter, 5.00" (127 mm) Conduit
Replacement adapters are available, which allow pulling into conduit up to 4" (102 mm). The external adapters are designed to fit the OD of the conduit, while the internal adapters, when used with the external adapters, fit the ID of the conduit. All adapters come split for easy removal. Internal Adapters require external adapters.
INCLUDES:
• (1) Internal Conduit Adapter Kit, 1" - 4"
SPECIFICATIONS:
• Size: 1.00" - 4.00" (25 - 127 mm)
Replacement adapters that allow pulling into conduit up to 4" (102 mm). The external adapters are designed to fit the OD of the conduit, while the internal adapters when used with the external adapters fit the ID of the conduit. All adapters come split for easy removal.
INCLUDES:
• (1) CableGlider LW Tripod, 3000 lbs
Pull an additional 5-feet of slack with the Condux LW CableGlider Tripod.
NOTE: LW CableGlider sold separately
Condux 08690001 Fiber Optic Cable Puller Without Electronics
Regular price
$9,364.80
/
INCLUDES:
• (1) Fiber Optic Cable Puller, Foot Control and Hoses. Does not include a remote mounting stand or a base mount. Please order separately.
• (1) Foot Control
• (1) Hose
FEATURES:
• Hydraulic puller mounted on a standard 21?2" (64 mm) squarre tube
• 30"-50" Diameter capstans available
• Foot control / hydraulic control assembly
• Hoses and cords to connect the puller to the foot control assembly and (Optional) Electronic Control System
• Easy set up, safe to use
• Variable speed control
• Bi-directional
Condux Fiber Optic Cable Pullers consist of a hydraulic motor, variable speed foot control, manual flow control valve for adjusting maximum speed and a manually adjustable pressure relief valve for adjusting the ultimate pull tension.
INCLUDES:
• (1) Fiber Optic Cable Puller
• (1) Foot Control
• (1) Hoses
• (1) Electronic ControlBox
• (1) Paperless Chart Recorder
FEATURES:
• Hydraulic puller mounted on a standard 21?2" (64 mm) squarre tube
• 30" (762 mm) diameter capstan
• Foot control / hydraulic control assembly
• Electronic control box with paperless chart recorder
• Hoses and cords to connect the puller to the foot control assembly and Electronic Control System
• Easy set up, safe to use
• Variable speed control
• Bi-directional
• Easy to use ECB system
Condux Fiber Optic Cable Pullers consist of a hydraulic motor, variable speed foot control, manual flow control valve for adjusting maximum speed and a manually adjustable pressure relief valve for adjusting the ultimate pull tension.
INCLUDES:
• (1) Slip Clutch Capstan 30" - 200 Lb. Rating
SPECIFICATIONS:
• Diameter: 30"
• Flat Width: 4"
• Max Cable O.D.: 0.75
• Rating: 200 lbs
Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 600 pounds (2,670 N) 10% (60 lbs or 267 N). If the preset load is reached, the capstan will "slip" and discontinue rotating. High strength aluminum and steel construction ensures product durability and cable protection. The capstan is factory calibrated to 600 lbs (2,670 N) but can be calibrated to different loads from 200 to 1,000 lbs. (890 to 4,448 N). The capstan is designed for use with a 2 7/16" (62 mm) diameter, AT&T specification bayonet style power take-off (PTO) shaft.
INCLUDES:
• (1) Slip Clutch Capstan 30" - 300 Lb. Rating
SPECIFICATIONS:
• Diameter: 30"
• Flat Width: 4"
• Max Cable O.D.: 0.75
• Rating: 300 lbs
Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 600 pounds (2,670 N) 10% (60 lbs or 267 N). If the preset load is reached, the capstan will "slip" and discontinue rotating. High strength aluminum and steel construction ensures product durability and cable protection. The capstan is factory calibrated to 600 lbs (2,670 N) but can be calibrated to different loads from 200 to 1,000 lbs. (890 to 4,448 N). The capstan is designed for use with a 2 7/16" (62 mm) diameter, AT&T specification bayonet style power take-off (PTO) shaft
INCLUDES:
• (1) Slip Clutch Capstan 30" - 400 Lb. Rating
SPECIFICATIONS:
• Diameter: 30"
• Flat Width: 4"
• Max Cable O.D.: 0.75
• Rating: 400 lbs
Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 600 pounds (2,670 N) 10% (60 lbs or 267 N). If the preset load is reached, the capstan will "slip" and discontinue rotating. High strength aluminum and steel construction ensures product durability and cable protection. The capstan is factory calibrated to 600 lbs (2,670 N) but can be calibrated to different loads from 200 to 1,000 lbs. (890 to 4,448 N). The capstan is designed for use with a 2 7/16" (62 mm) diameter, AT&T specification bayonet style power take-off (PTO) shaft
INCLUDES:
• (1) Slip Clutch Capstan 30" - 500 Lb. Rating
SPECIFICATIONS:
• Diameter: 30"
• Flat Width: 4"
• Max Cable O.D.: 0.75
• Rating: 500 lbs
Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 600 pounds (2,670 N) 10% (60 lbs or 267 N). If the preset load is reached, the capstan will "slip" and discontinue rotating. High strength aluminum and steel construction ensures product durability and cable protection. The capstan is factory calibrated to 600 lbs (2,670 N) but can be calibrated to different loads from 200 to 1,000 lbs. (890 to 4,448 N). The capstan is designed for use with a 2 7/16" (62 mm) diameter, AT&T specification bayonet style power take-off (PTO) shaft
INCLUDES:
• (1) Slip Clutch Capstan 30" - 600 Lb. Rating
SPECIFICATIONS:
• Diameter: 30"
• Flat Width: 4"
• Max Cable O.D.: 0.75
• Rating: 600 lbs
Slip Clutch Capstans from Condux are designed to mount directly on a bayonet style winch drive shaft. A factory preset torque limiter prevents pulling tensions from exceeding 600 pounds (2,670 N) 10% (60 lbs or 267 N). If the preset load is reached, the capstan will "slip" and discontinue rotating. High strength aluminum and steel construction ensures product durability and cable protection. The capstan is factory calibrated to 600 lbs (2,670 N) but can be calibrated to different loads from 200 to 1,000 lbs. (890 to 4,448 N). The capstan is designed for use with a 2 7/16" (62 mm) diameter, AT&T specification bayonet style power take-off (PTO) shaft
