INCLUDES:
(1) 500W Commercial Light with Magnetic Base
FEATURES:
This industrial grade 500W light system has increased versatility because of its magnetic base.
The Construction Electrical Products 5050 Magnetic Specialty Quartz Light magnetic base provides up to 200 lbs. of holding power.
500W Specialty quartz fixture.
5" diameter magnetic base.
On/Off switch on all units.
Vinyl cover on magnet protects attached surface.
8" 16/3 SJTW power supply cord.
Call for warranty information.
INCLUDES:
• Stubby LED Portable Work Light
FEATURES:
• 51 Watt LED Panel Light
• 3 Panel Design with rotating wings for 360o directional lighting.
• 3000 Lumen Output white LED Illumination. Reduces eye stress and allows for better color rendering.
• Very Low Energy Consumption – 0.47 amps on a 120V circuit. This low energy draw allows to run off of primary power and still maximize
• ETL and CETL Listed for outdoor use. No additional guard required for Wet Location work.
• Impact Resistant for durability in harsh environments.
• 180o Tilt to provide illumination on various levels.
• Very Low Heat Output allows for use in tight work areas.
Introducing the new Clamp-Lock. Its a revolutionary way to install a u-ground connector for faster assembly and to ensure a reliable, maintenance-free connection. Open the levers, insert the stripped wires and close the levers. A molded-in guide shows how much wire should be stripped. The strain relief has been designed to accommodate a wide range of cable diameters, including fiberglass sleeving.
INCLUDES:
(1) 15A/125V U-Ground Female
FEATURES:
Cage clamp terminations cannot loosen, eliminating the main cause of device failure.
Does not require tools; simply finger-open and close the terminals.
Saves labor.
All-black color blends into scenery.
Beefy external cord clamp provides excellent strain relief for a wide range of cord sizes.
Molded-in guide for stripping insulation.
CEP 5270 3000V 51 Watt Stubby Work Light With Stand
Regular price
$215.06
/
INCLUDES:
• Stubby LED Portable Work Light
• Stand
FEATURES:
• 51 Watt LED Panel Light
• 3 Panel Design with rotating wings for 360o directional lighting.
• 3000 Lumen Output white LED Illumination. Reduces eye stress and allows for better color rendering.
• Very Low Energy Consumption – 0.47 amps on a 120V circuit. This low energy draw allows to run off of primary power and still maximize
• ETL and CETL Listed for outdoor use. No additional guard required for Wet Location work.
• Impact Resistant for durability in harsh environments.
• 180o Tilt to provide illumination on various levels.
• Very Low Heat Output allows for use in tight work areas.
CEP 5322 12' 2000W Elliptical Metal Halide Cart Light
Regular price
$1,167.25
/
INCLUDES:
• (1) 12' 2000W Elliptical Metal Halide Cart Light
FEATURES:
• All frames are made of 1-1/4” 12 gauge steel tube and are powder coated safety yellow
• Head assemblies are easily removed from the mast and detach from their ballast. This enables one person setup and offers safety and convenience in transporting and storage
• Model 5322 has a heavy-duty steel telescoping mast which is raised and lowered by a self-braking winch. Each mast lays down or removes for easy transporting
SPECIFICATIONS:
• Light: 2
• Handle/ Mast: 2 Stage Winch
• Lumens: 220,000
• Ballast: Fixed
• Height: 5ft. 6in. - 12ft. (168 – 366cm)
• Watts: 2000 Watts
CEP’s Metal Halide lights feature the LH1000MH, an elliptical shape 1000 watt metal halide fixture. These light heads are extremely strong, compact and the bulbs are rated to last 10,000 hours. CEP’s Metal Halide lights are mounted in a heavy-duty steel yoke, providing impact resistance when in use or when transporting to another locations. All models are available with optional GFCI plug. All Metal Halide lights are 125V, but may be special ordered in other voltages. Metal Halide lights require a warm-up time of 4-5 minutes for full illumination. A cool-down time of 5-15 minutes is recommended after shutdown to re-light.
SPECIFICATIONS:
• Stand Height: 7'
• Handle/Mast: 2 Stage
• Watt: 1000
• Switch: Yes
• Legs: 19"
CEP’s lights are ETL listed portable work light “approved for use in wet locations.” Built to last, CEP’s heavy-duty quartz lights have been designed to endure the harshest of jobsite conditions. These portable light stands are made of heavy wall tube steel and have no plastic parts. The Hubbell style fixtures emit 11,000 lumens of color-correct light and provide the user with much more light efficiency than the traditional imports.
CEP 6425s 25' L 50 Amp Power Cord, 6/3 – 8/1 Wiring w STOW Jacket
Regular price
$134.49
/
INCLUDES:
• (1) 25' L 50 Amp Power Cord, 6/3 – 8/1 Wiring w STOW Jacket
FEATURES:
• STOW Cord
• Water resistant
• Operates with 125/250V devices
• PVC Jacket
SPECIFICATIONS:
• Length: 25'
• Gauge: 6/3 - 8/1, 4 wire
• Jacket Type: STOW (PVC)
• Water Resistant: Yes
• Jacket Type: PVC
• Weight: 15.6 lbs
CEP #6425S is a 25 foot 6/3-8/1 4 wire STOW 50A power cord. This is an extremely heavy duty power cord most often used in conjunction with a spider box like the CEP 6506-GU Spider Box. Material used is SOW rubber.
Details
CEP 6450M Specifications:
Length: 50'
CEP 6450M Features:
6/3-8/1 SOW 50A power cord
Extremely heavy duty power cord for use with the CEP 6506-GU Spider Box or similar box (not included).
Made in the USA
