Calculated Industries 4020 Measure Master Pro - Feet-Inch-Fraction and Metric Calculator
Regular price
$29.95
/
Calculations:
• Work in and convert between dimensions, including Metric
• Linear, Area and Volume measurements; Square-up and Perimeter
• Find Weight and Weight per Volume
• Instant solutions for Circle Area, Circumference, Arcs and More
• Board feet
• Cost per Unit: solve unit cost and pricing
Includes
• Protective Hard Slide Cover
• Easy-to-follow Pocket Reference Guides
in English and Spanish
• Long-Life Batteries
• Full One-Year Limited Warranty
Calculated Industries 4065 Construction Master Pro Calculator
Regular price
$49.95
/
Calculated Industries 4065 Specifications:
• Size: 5.6” x 3.0” x 0.6” (142.8mm x 76.2mm x 15.9mm)
• Product Weight: 4.5 oz. (127.5 gm) Includes Case and Pocket Reference Guide
• Power: Two 1.5-volt (LR-44/A76) Long-life Batteries
• Display Type: 11 Digits (7 normal, 4 Fractions) with Full Annunciators
• Display Dimensions: 0.625” x 2.5” (15.88 mm x 63.5 mm)
• Accuracy: 10 Digit Internal Accuracy
Calculated Industries 4065 Includes:
• (1) Construction Master Pro Calculator
Calculated Industries 4065 Features:
• Complete Stair calculations for Risers, Treads, Stringer Length and Incline Angle
• Set Riser Height and solve for Stairwell Opening
• Built-in Right-Angle Functions for Square-ups, Slopes and more
• Area, Volume and Perimeter solutions with Length, Width and Height Keys
Drywall, Siding and Paneling Key calculates 4x8, 4x9 or 4x12 Sheets to cover an Area
• Roof Function finds Area, Bundles, Squares and 4x8 Sheathing for Flat or Pitched Roofs
• Custom Rafter Function provides Common Rafters, Regular and Irregular Hips, Valleys and Jacks; instant Cutting Angles (Cheek, Level and Plumb)
• Jack Rafter results for Regular and Irregular Pitch Roof. Find Rake-Wall Studs with On-center spacing
• Compound Miter – Store Crown Angle and Enter Wall Corner Angle to calculate the Blade Tilt and Angle for Miters cuts
• Advanced solutions for Circles, Arches, Columns, Cones, Pillars, Windows and Post-holes
• Arched Rake-Walls with On-center Spacing
• Studs – Calculate the number of On-center Studs for an entered Length
• Equal Sided Polygon – Calculate Corner and Bi-sect Angles, Side Length, Perimeter and Area
• Block and Footing solutions
• Board Feet Lumber estimating
Calculated Industries 4080 Construction Master Pro Trig
Regular price
$81.25
/
Dimensional Math and Conversions
• Work in and convert between all building dimensional formats: Yards, Feet-Inch-Fractions, Decimal Feet and Inches and Metric – including Area and Volume
• D:M:S to Decimal Degree conversions
• Weight per Volume
• Full Trigonometric Function: Sine, Cosine, Tangent, Arcsine, Arccosine and Arctangent simplify complex design and construction-math
New Features, Functions and Enhanced Solutions:
• Drywall, Siding, Panels – Find number of Sheets for an Area
• Stairs – Set Riser Height and solve for Stairwell Opening
• Studs – Find number On-center for an entered Length
• Compound Miter Cuts
• Arched Rake-Walls
• Equal sided Polygons
Includes
• Protective Hard Slide Cover
• Easy-to-follow User's Guide
• Handy Pocket Reference Guide in English and Spanish
• Long-Life Batteries
• Full One-Year Limited Warranty
• English and Spanish CD-ROM with “How-To” Video and User’s Guide
Calculated Industries 4087 MachinistCalc Pro - Advanced Machining Math & Ref Tool
Regular price
$69.95
/
Dedicated Functions:
• Speeds and Feeds - Calculate for Milling, Turning and Drilling; Spindle Speed (RPM), Feed Rate (IPM), Cut Speed, Cut Feed, Feed per Tooth
• Thread Size - Enter numeric, fractional or metric thread sizes and display tap, roll tap, close and free fit drill sizes. Display pitch, major and minor diameters
• Drill Point - Enter the cutting angle and Drill Size and calculate the Drill Point cut depth
• Drill Size - Enter numeric, letter, fractional or metric Drill Size and display the closest fitting Drill Size and scroll through available drill sizes
• 3-Wire Measure - Enter Wire Size (or use calculated Best Wire size) and 3-Wire Measurement to calculate pitch diameter
• Trigonometric Functions - Sine, Cosine, Tangent, Arcsine, Arccosine, Arctangent
• Right Triangle Math - Enter, calculate Angle, Hypotenuse, Opposite and Adjacent side lengths
Additional Features:
• Thread Classification Tables
o U.S. Internal (3) 1B, 2B, 3B
? External (3) 1A, 2A, 3A
o Metric Internal (14) 3G-9G and 3H-9H
? External (28) 3g-9g, 3h-9h, 3e-9e, 3f-9f
• U.S. and Metric Unit Entries and Conversions
o Decimal Inches/mils
o Feet-Inch-Fractions
o m, mm, cm
o Area, Volume and Weight
• Works as a Standard Calculator
Includes:
• Rugged, shock-, moisture- and dust-resistant Armadillo Gear case
• Quick Reference Guide and complete, easy-to-follow User Guide
• Two 1.5 volt LR-44/A76 Long-life Batteries
• Full One-Year Limited Warranty
Calculated Industries 4094 PlumbingCalc Pro - Flow & Dimensional Math Calc
Regular price
$59.95
/
Calculations:
• Right Angles, Offset Pipe Lengths
• Fitting Angles, Bends, Slopes, Percent Grades, Drops
• Feet-Inch-Fractions
• Pipe Areas, Fill Weights
• Flow Rates, Velocity, Force, Volumes
• Pressure Loss for any Pipe Size, Type or Distance
• Complete Building, Plumbing and Metric Unit Conversions
Built-in Pipe Data
• Choose a Pipe Material and Pipe Type and enter Size and get Diameters, Wall Thickness, Filled Weight per Foot, Internal Area.
• Seven different Pipe Materials: Steel, Stainless Steel, Brass, Aluminum, Cast Iron, Plastic, Copper.
Includes:
• Rugged, shock-, moisture- and dust-resistant Armadillo Gear case
• Quick Reference Guide and complete, easy-to-follow User Guide
• Two 1.5 volt LR-44/A76 Long-life Batteries
• Full One-Year Limited Warranty
Calculated Industries 4095 Pipe Trades Pro - Advanced PipeTrades Math Calc
Regular price
$79.95
/
Calculations:
• Right Angles, Offsets, and Complex Rolling Offsets
• Fitting Angles, Bends, Slopes Percent Grades, Drops
• Parallel Pipe Cutbacks
• Feet-Inch-Fractions and Trigonometry
• Pipe Areas, Fill Weights
• Flow Rates, Velocity, Force, Volumes
• Pressure Loss for any Pipe Size, Type or Distance
• Complete Building, Plumbing and Metric Unit Conversions
Built-in Pipe Data
• Choose a Pipe Material and Pipe Type and enter Size and get Diameters, Wall Thickness, Filled Weight per Foot, Internal Area.
• Seven different Pipe Materials: Steel, Stainless Steel, Brass, Aluminum, Cast Iron, Plastic, Copper.
Includes:
• Rugged, shock-, moisture- and dust-resistant Armadillo Gear case
• Quick Reference Guide and complete, easy-to-follow User Guide
• Two 1.5 volt LR-44/A76 Long-life Batteries
• Full One-Year Limited Warranty
Calculated Industries 4225 Specifications:
• Size 5.7” x 3.0” x 0.65”
• Power: 3-volt (CR-2016) Long-life Battery
• Display Type: LCD: 11 Digits• (7 normal, 4 Fractions) with Full Annunciators
• Display Dimensions: 0.73” x 2.56”
• Accuracy: 12 Digit Internal Accuracy
• Maximum Display: up to 19999999.99
Calculated Industries 4225 Includes:
• (1) Concrete Calc Pro
• (1) Protective 360° Hard Cover Case
• (1) Handy Pocket Reference Guides in English/Spanish
• (1) Long-Life Batteries
Calculated Industries 4225 Features:
• Length, Width, Height keys for fast Area and Volume solutions.
• Instant Square-up and Drop for perfect layouts.
• Complete Stair calculations: Risers, Treads, Stringers and Incline Angle. Solve “not-to-exceed” Riser Height, (Store “Riser Height” and “Tread Width”).
• Rebar: find total Linear Feet and calculate Weight for Rebar Sizes; store various Rebar Size, On-center Spacing.
• Number of Loads: calculate the number of truck Loads based on Load size.
• Bags: easily determine the number of bags of concrete for small jobs.
• Circular solutions for Area, Arc, Circumference, Column and Cones.
• Automatic Block and Footing keys for material estimates.
• Polygon: calculate Full angles and Bi-sect angles.
Calculated Industries 4325 HeavyCalc Pro - Heavy Construction-Math Calculator
Regular price
$59.95
/
Dedicated Functions
• Square-ups and Right Angles! Percent Grade and Slope keys give you instant Right Angle solutions for Diagonals; easily stakeout Drops, Ramps, Trenches and More!
• Weight per Volume (Lbs, Tons, Kg)! Convert between weights and find the weight of material (i.e., Tons per Cubic Yard, etc.).
• Find Percent (%) Swell and Shrink! Quickly determine Bank, Compacted and Loose Soil Volumes for any job.
• Simplify Cut/Fill Estimates! Built-in Cut/Fill, Existing and Proposed functions make soil-volume estimates easy.
• “Average” Function! Speeds Grid-Cell - Cut/Fill estimates.
Includes:
• Easy-to-follow User’s Guide
• Protective Hard Case
• Full One Year Limited Warranty
Calculated Industries 43430 Qualifier Plus IIIfx Desktop
Regular price
$56.42
/
The Qualifier Plus IIIFX-DT is the ideal tool for real estate investors and agents. In addition to both common and advanced real estate finance problems and complete buyer qualifying, it calculates multiple cash flows and internal rate of return (IRR), as well as net present and net future values (NPV/NFV) – all in a large, easy-to-use desktop format.
Calculated Industries 44080 Construction Master Pro Desktop
Regular price
$79.95
/
Calculations:
• Work in and convert between any building dimension, including Metric
• Trigonometric Function
• Find Weight per Volume
• Built-in Right-Angle solutions
• Complete Stair Layouts
• Roof, Rafter, and Framing solutions
• Advanced Circular calculations: Arcs, Circumference, Segments and More
New Features, Functions and Enhanced Solutions:
• Drywall, Siding, Panels – Find number of Sheets for an Area
• Stairs – Set Riser Height and solve for Stairwell Opening
• Studs – Find number On-center for an entered Length
• Compound Miter Cuts
• Arched Rake-Walls
• Equal sided Polygons
Includes
• Easy-to-follow User's Guide
• Long-Life Battery
• Full One-Year Limited Warranty
• Full Size Keys
• English and Spanish CD-ROM with “How-To”
• Videos and User’s Guide
Calculated Industries 5006 Scale Master Pro XE PC Interface Cable
Regular price
$69.95
/
Requires Scale Master Pro XE - Model 6135 (Sold Seperately). Please note our bundled package of the Scale Master Pro XE with PC Interface is Model 6335.
Compatible with your PC:
The PC Interface Cable allows the transfer of any rolled values from the Scale Master Pro XE directly to commonly used spreadsheets or estimating programs saving countless keystrokes and time. The PC Interface works with all Windows® construction estimating software, such as the following:
• Sage Timberline Office
• Craftsman National Estimator
• Accubid
• McCormick Estimating Software
• UDA Construction Suite
• ConEst
• WinEst
• QuickBooks
• Hard Dollar
• ProEst
• RSMeans CostWorks
• Hometech
• HCSS HeavyBid
• On-Center
• Applied Systems Associates
• PlanSwift
• Activant
• ArenaSoft
• AGTEK
• Bid2Win
• CRT
• EasyEst
• Deluxe Invoices & Estimates
• DQ 2000
• Microsoft Excel
• Microsoft Project
• FastPipe & FastDuct
• GEM by Compu-Ability Inc.
• ICE by Management Computer
• Controls
• Jaffe
• Lotus
• Sage Master Builder
• MaxView
• MC2
• MIKE
• One-Step Estimating
• Quickpen
• QuoteWerks
Calculated Industries 5055 ElectriCalc Pro Calculator
Regular price
$117.04
/
Calculated Industries 5055 Features:
• Saves time, reduces material cost and eliminates code violations on electrical design, estimating and construction jobs.
• 1999/1996 NEC built-in, factory updateable for future code revisions.
• Complete wire sizing, integrated voltage drops solutions and conduit sizing solutions: finds motor full-loads, computes fuse and breaker sizes and size overload protection.
INCLUDES:
• (1) Calculator
• (1) 3V CR2016 Battery
FEATURES:
• Work directly in and convert between Amps, Watts, Volts, Volt-Amps, kVA, kW, PF% and EFF% and DC Resistance
• Ohm’s Law Calculations – enter any two values to solve for the third
• BTU to kilowatt/hour and kilowatt/hour to BTU conversion
• Shock-absorbing protective case
• Calculate wire sizes per NEC®; Copper or aluminum, 3Ø/1Ø, 60°C, 75°C, 90°C insulation ratings and 100% or 125% of ampacity. Adjust wire sizes for ambient temperatures other than 30? C and for more than three wires in a raceway
• Integrated voltage drop solutions. Find minimum VD wire size, maximum Length for any given wire size, drop percentage, actual number and percentage of Volts dropped
• Conduit sizing for 12 types of conduit. Find sizing of all common conduits for any combination for THW/THHW, XHH/XHHW and THHN/THWN wires. Plus, gives fill percentages, cross-sectional areas, remaining areas and more
• Find Motor Full-Load Amps per Current NEC®. Works in 1Ø and 3Ø with the new expanded tables for 3Ø induction (to 500 hp) synchronous (to 200 hp) and DC motors per NEC®.
• Calculates Fuse and Breaker Sizes. Solves fuse and breaker sizes per NEC®.
• Parallel and derated wire sizing
• Parallel Resistance
SPECIFICATIONS:
• Accuracy: 12 digit internal accuracy
• Display: LCD
Dimensional Math and Conversions:
Perform Instant Linear, Rectangular Area and Volume Take-Offs; use it like a pen--just roll and measure!
Convert between scales and dimensions
Custom Scales: Six user-set custom scales. Calibrates to any plan and then stores that scale for future use. Perfect for scaling faxed or out-of-scale plans.
Calculate Rectangular Areas/Volumes (L x W x H). Roll and enter Length of room, then Width and instantly calculate Square Footage.
Dedicated Functions:
72 Built-In Scales; 39 Imperial (feet-inch) and 33 Metric.
Multiple dimensional units for versatility; select your favorite measurement units: Decimal Feet, Feet-Inches, Decimal Inches, Yards, Millimeters, Meters, Kilometers--including Square and Cubic formats of each.
Time Saving Utilities:
Rolls distances in either direction and accepts dimensions as fast as you can accurately roll them.
Measures regular linear distances and shapes.
Subtract and Counter Feature lets you subtract if you roll too far. Also lets you count items (e.g., studs, outlets, etc.) and accumulate in memory.
Easy-to-read dual display shows your measurement in Feet/Inches or Metric.
Includes:
Hard Cover Protective Case
Complete User’s Guide
(2) Long-life Lithium Batteries (CR-2032)
Full One-year Limited Warranty
Tech Specs
Size:
7.3" x 1.9" x 0.6" (186 x 47 x 15 mm)
Wheel Resolution:
0.025" (0.635 mm)
Wheel Composition:
Celcon Polymer
Weight (product only with battery):
2.1 oz. (60 g)
Power:
Two 3-volt lithium (CR-2032) batteries (included)
Display Type:
LCD segment; 7-digit main display, 3-digit count, 5-digit scale display, with annunciator legends
Display Dimensions:
Upper: 0.62 x 1.22" (15.8 x 31 mm)
Lower: 0.79 x 1.22" (20 x 31 mm)
Accuracy:
2-4%, based on user's start & stop accuracy; 12 digit internal accuracy
Calculated Industries 6135 Scale Master Pro XE - Advanced Digital Plan Measure
Regular price
$98.98
/
Dedicated Functions:
• 91 Built-in Scales: 50 Imperial (Feet-Inch) and 41 Metric for maximum versatility in architectural, engineering and civil/map scaling.
• Dedicated Length, Width and Height Keys: "Roll", store and recall L, W & H values and instantly find rectangular Areas and Volumes.
• Auto Count Feature: Automatically counts how many times a pre-set distance has been rolled. Great for stud counts, columns, fence posts, outlets, fixtures or any other regularly spaced items.
• Count While Rolling: Push-button counter lets you count items as you roll.
• Constant (+K) Key: Allows you to add (or subtract) a constant value to the distance measured. Great for take-outs and add-ons.
Time Saving Utilities:
• Lock Switch: Lock in the mode and scale to prevent changing them while rolling.
• Imp-Met Switch: Instantly changes to working in Imperial or Metric units.
• Subtract Key: Allows you to easily deduct rolled distances.
• Accumulating (M+) Memory: Allows easy totaling of dimensions or counts – perfect for multi-page plans.
• PC ready: The plug-and-play PC interface lets you transfer any rolled values from the Scale Master Pro XE directly to commonly used spreadsheets or estimating programs, saving countless keystrokes and time. Reduce the potential for costly transcribing errors. USB cable sold separately.
• Auto Shut-off
Includes:
• Hard Cover Protective Case
• Multi-language User Guide on CD-ROM
• (2) CR-2032 Long-life Lithium Batteries
• Full One-Year Limited Warranty
• 15' USB Cable for PC Interface (purchase separately)
USB Plug-and-Play interface to the Ultra Scale Master Pro
Digitizes areas, perimeters and lengths
2D and 3D perspective display of digitized images
Transfers digitized quantities into any Windows® program, including spreadsheets and estimating programs
Exports graphic image to DXF (Drawing Exchange Format) files
Draws in any color available in the Windows palette
Seven fill styles for area objects
Selectable line weight
Auto-zooms image so that it always fits the computer’s display
Works in any scale including custom scale
Measures unknown scales on reduced or enlarged drawings
Supports both imperial and metric units
Tech Specs
System Requirements:
Windows® 2000, XP and Vista 32-bit Operating Systems
One USB port for the Ultra Scale Master® Pro – (not included)
One GHz Pentium microprocessor minimum
256 MB RAM minimum
10 MB available hard drive capacity
XVGA or higher resolution color graphics display
CD-Rom Drive
Ultra Scale Master Pro Operating Modes
• Stand Alone Operation
Measure and display line lengths, areas, perimeters, volume, wall areas, arc lengths, radius and diameter without the use of a PC.
• PC Input Mode
Send displayed values to your spreadsheets and estimating software programs via supplied USB cable (no special USB driver software needed).
• Digitizer (x,y) Coordinate Entry
Send coordinates to graphic digitizing software like our Smart Takeoff! program.
Smart Takeoff! Software
• USB Plug-and-Play interface
• Works with any scale
• Digitizes areas, perimeters and lengths
• Two- and three-dimensional perspective graphic display of digitized images
• Transfers digitized quantities into any Windows® program, including spreadsheets!
• Draws in any color available in the Windows® palette
• Seven fill styles for area objects
• Selectable line weight
• Auto-zooms image so that it always fits the computer’s display
• Exports graphic image to DXF (Drawing Exchange Format) files
• Measures unknown scales on reduced or enlarged drawings
• Supports both imperial and metric units
Calculated Industries 6335 Scale Master Pro XE with PC Cable
Regular price
$119.95
/
The included PC Interface cable lets you transfer rolled values from the Scale Master® Pro XE directly into commonly used spreadsheets or estimating programs, saving countless keystrokes, saving time and reducing the potential for costly transcribing errors.
It helps you:
• Complete takeoffs with speed and accuracy
• Reduce errors in estimates and bids
• Improve productivity and maximize profitability
• Create permanent record of dimensions and values
• Interfaces with PC spreadsheets or estimating programs
• PC ready: The plug-and-play PC interface lets you transfer any rolled values from the Scale Master Pro XE directly to commonly used spreadsheets or estimating programs, saving countless keystrokes and time. Reduce the potential for costly transcribing errors. USB cable included.
• Auto Shut-off
Calculated Industries 6575 DigiRoller Plus III Measuring Wheel
Regular price
$159.11
/
INCLUDES:
• (1) Handy backpack/carrying case
• (1) 9-volt battery
• (1) Reflective tape for safety
• (1) Wrist lanyard
FEATURES:
• The DigiRoller Plus III is built to last. It has a reinforced metal shaft and the LCD has an anti-shock mount.
• Easy-to-use handle-mounted controls with 7-digit backlit display
• Easy transport and storage - it has a built-in carrying handle and folds to half size
• Gear drive is sealed for better protection
• Work in the units you use - U.S. or metric
• TrueTac buttons make it easy to use when you're wearing gloves
• Center line design for balance and accuracy
• Measures up to 9,999,999 feet, meters, yards or inches
• Circle calculations for Area, circumference, circle volume and circle wall surface area
• Calculate volume, wall surface area and circle volume
• Measure lengths and widths, press a button and area and perimeter
• Includes backpack carrying case
• 2-year warranty
SPECIFICATIONS:
• Linear Units: feet-inch, inches, decimal feet, yards, meters
• Area Units: square feet, square yards, acres, square meters, hectares
• Volume Units: cubic feet, yards and meters
• Measuring Range: 0 to 9,999,999 (yards, meters)
• Wheel Accuracy: 99.5%
• Internal Math Accuracy: 12 digits
• Length: Extended - 40.5" (103 cm), Folded - 21.5" (55 cm)
• Wheel Size: 12.5" diameter (32 cm), 39.3" circumference (1 m)
• Maximum Speed: 12 mph (19 km/h)
• Display Capacity: 7 digits (9,999,999)
• Weight: 4.1 lbs (1.9 kg)
• Power: (1) 9 volt battery
• Operating Temperature: 32°F to 104°F (0°C to 40°C)
• Storage Temperature: -4°F to 140°F (-20°C to 60°C)
The newly re-designed DigiRoller Plus III can measure lengths, widths and heights, and it can calculate areas, volumes, perimeters and more in U.S. or metric units. The new Digi puts the controls right in the palm of your hand - no stooping, bending or squinting.
Calculated Industries 8025 Ultra Measure Master -Grade U.S. Standard to Metric Conv Calc
Regular price
$39.95
/
Dimensional Math and Conversions
• More than Sixty Standard and Metric (SI) units built-in for fast, reliable conversions on the job or in the office.
• Over 400 conversion combinations!
• Works in and convert between Feet, Inches, Fractions, Yards, Meters, Centimeters and Millimeters – including Square and Cubic formats.
• Meets federal highway metrication requirements. *Note: (si) is the International System of Units, or metric system.
Includes
• Protective 360° Hard Cover Door
It helps you:
• Accurately scale recipes up or down
• Scale for number of servings, portions, or both
• Convert cooking volume units
• Convert units of weight
• Convert temperatures
Dedicated Functions:
• Accurately scale recipes up or down
• Scale for number of servings, portions, or both
• Convert cooking volume units:
Teaspoons, Tablespoons, Fluid Ounces, Cups, Pints, Quarts, Gallons, Milliliters, Centiliters, Liters, even Dash and Pinch
• Convert units of weight:
Dry Ounces, Pounds, Grams, Kilograms
• Convert between temperatures
°C and °F
• Metric unit conversions helps you use popular international recipes
Includes:
• 360-degree flip-over, hinged, hard- case
• Easy-to-follow User’s Guide
• Soft, clear vinyl cover protects keys during use and allows easy cleaning
• Long-life battery
• Full One-year Limited Warranty
